Jump to content
Strawberry Orange Banana Lime Leaf Slate Sky Blueberry Grape Watermelon Chocolate Marble
Strawberry Orange Banana Lime Leaf Slate Sky Blueberry Grape Watermelon Chocolate Marble

MSFN is made available via donations, subscriptions and advertising revenue. The use of ad-blocking software hurts the site. Please disable ad-blocking software or set an exception for MSFN. Alternatively, register and become a site sponsor/subscriber and ads will be disabled automatically. 


Recommended Posts

Hey guys, I have a slight problem with my CPU cooler being too big and wanting to upgrade my memory.  I have a ASUS P8Z77-V LK motherboard and a Cooler Master Hyper 212 EVO.  Because I am using the G.Skill Ribsaw, I can only seem to fit in the two chips in the second slots because either the CPU cooler is so big that it blocks the first channel for the ram or its just because the ram is too tall. 

 

Now I can install more ram if I swap the fan on the other side, but it'll be blowing the wrong direction, right now I have to set so the fan is blowing air through the heatsink, which I think is keeping my computer really cool right now.  Because I have it set like this, it just blocks the first channel and I can't get any more rim to fit..and even when I installed the first chip on the second first channel, I still had to remove the cooler's fan to get it in there.  

 

If anyone else had this issue before, I would like to know what you did because I've been really wanting to get another 8gb kit to make it 16gb.  

 

Here's a pic of my comp to show you exactly what I'm talking about. 

 

post-58421-0-88072100-1404053397_thumb.j

Edited by Nerwin

Share this post


Link to post
Share on other sites

You can raise a bit the fan, see:

http://www.tomshardware.co.uk/answers/id-2114565/coolermaster-hyper-212-evo-corsair-vengeance-heat-spreaders.html

or you can see if you can remove some (unneeded) plastic from the fan:

http://www.tomshardware.co.uk/answers/id-2144369/hyper-212-evo-high-profile-ram.html

 

Of course it depends on how much it is needed to raise the fan or cut it to make it not interfere with the RAM.

 

Also there are both "high" and "low" profile RAM sticks, you should check (if you still have to buy the RAM) what the situation is with a "low profile one. 

 

jaclaz

Share this post


Link to post
Share on other sites

I completely forgot that I can raise the fan.  I thought about buying lower profile ram, but I'm really happy how my computer is performing now with the G.Skills.  I thought 8GB would've been enough for me, but I've maxed it out a few times when doing a lot of photo/video processing.  

 

Well I think I'll order some more RAM and I'll let you know how it goes. 

 

Thanks again! 

Share this post


Link to post
Share on other sites

I wouldn't want the main chassis fan blowing into the PC. The only way the OP possibly could switch the fan to blow towards the front is if there are at least 2 fans pushing that air out. The other problem is that people typically will have HDDs at the front, you might not want heated air from the CPU going over those before exiting the chassis.

Share this post


Link to post
Share on other sites

Also the fan from the PSU would interfere in the whole flow scheme.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...