Jump to content

Deploying IE 10 for Windows 7


Recommended Posts

Also if you inject too many times you will get those errors. Start over with fresh install.wim.

I inject monthly updates but after 3-4 times I start fresh and inject all at once. I have 122 64 bit msu total now

Ah... very true. I didn't really think about this, since the early days when I automated the process, I always copy in a fresh wim at the start, and run the entire thing from scratch. It takes awhile, but it can just churn away while I am working on something else.

Also in case anyone cares, the only update to my previous lists from above for today's patch release was windows6.1-kb2807986-x64.msu (assuming IE10 is integrated, otherwise there are more)

*Edit* I take that back

windows6.1-kb2791765-x64.msu also replaced windows6.1-kb2762895-x64.msu

Edited by Domain
Link to comment
Share on other sites

  • 2 months later...

Hello, i have a problem silently installing spanish version of IE10, there is my log

00:00.000: ====================================================================

00:00.063: Started: 2013/05/22 (Y/M/D) 14:22:31.775 (local)

00:00.063: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)

00:00.063: Command line: F:\IE10\Archivos\IE10-Setup-Full_X64\IE-REDIST.exe /passive /update-no /closeprograms /norestart /log:C: /ieak-full:F:\IE10\Archivos\IE10-Setup-Full_X64\

00:00.063: INFO: Setup installer for Internet Explorer: 10.0.9200.16521

00:00.094: INFO: Previous version of Internet Explorer: 8.0.7601.17723

00:00.094: INFO: Checking if iexplore.exe's current version is between 10.0.8100.0...

00:00.094: INFO: ...and 10.1.0.0...

00:00.109: INFO: Maximum version on which to run IEAK branding is: 10.1.0.0...

00:00.109: INFO: iexplore.exe version check success. Install can proceed.

00:00.109: INFO: Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)

00:00.312: INFO: IEAKPRXY>>[bEGIN] Call to IEAKInitialize()

00:00.312: INFO: IEAKPRXY>>IEAK_DLL: Date:5/22/2013 (M/D/Y) Time:14:22:32

00:01.186: INFO: IEAKPRXY>>IEAK_DLL: Install Engine - download directory set to F:\IE10\Archivos\IE10-Setup-Full_X64

00:01.311: INFO: IEAKPRXY>>IEAK_DLL: SetLocalCif :F:\IE10\Archivos\IE10-Setup-Full_X64\IESetup.CIF:

00:01.357: INFO: IEAKPRXY>>IEAK_DLL: IEAKInitialize : Successfully Inited

00:01.357: INFO: IEAKPRXY>>[END] Call to IEAKInitialize()

00:01.357: INFO: IEAKPRXY>>[bEGIN] Call to IEAKSetConfiguration()

00:01.357: INFO: IEAKPRXY>>IEAK_DLL: IEAKSetConfiguration: Successfully Set Configured

00:01.357: INFO: IEAKPRXY>>[END] Call to IEAKSetConfiguration(), return value: TRUE

00:01.357: INFO: Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"

00:01.373: INFO: Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"

00:01.373: INFO: Trying to extract ID: 7006 (0) as "IE10-neutral.Extracted.cab"

00:01.857: INFO: Trying to extract ID: 7010 (3082) as "IE10_amd64_ESN.cab"

00:01.888: INFO: Extracted ESN language pack to C:\Windows\TEMP\IE1991.tmp\IE10_amd64_ESN.cab.

00:01.888: INFO: Trying to extract ID: 5501 (3082) as "Spelling_es.msu"

00:01.888: INFO: Extracted Spelling dictionary for es to C:\Windows\TEMP\IE1991.tmp\Spelling_es.msu.

00:01.888: INFO: Trying to extract ID: 5502 (3082) as "Hyphenation_es.msu"

00:01.888: INFO: Extracted Hyphenation dictionary for es to C:\Windows\TEMP\IE1991.tmp\Hyphenation_es.msu.

00:01.888: INFO: Trying to extract ID: 5501 (1033) as "Spelling_en.msu"

00:01.888: INFO: Extracted Spelling dictionary for en to C:\Windows\TEMP\IE1991.tmp\Spelling_en.msu.

00:01.903: INFO: Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"

00:01.903: INFO: Extracted Hyphenation dictionary for en to C:\Windows\TEMP\IE1991.tmp\Hyphenation_en.msu.

00:01.903: INFO: Trying to extract ID: 7128 (3082) as "IE10-support.cab"

00:03.058: INFO: Launched program to check hardware: "C:\Windows\TEMP\IE1991.tmp\IE10-SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE1991.tmp\HardwareBlockingList.xml"

00:03.417: INFO: Hardware support check succeeded. Installation will continue.

00:03.417: INFO: Windows 7 operating system detected.

00:03.417: INFO: Service pack major: 1

00:03.417: INFO: Service pack minor: 0

00:03.417: INFO: Service pack name: Service Pack 1

00:03.479: INFO: Version Check for (KB2670838) of C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll: 6.2.9200.16492 >= 6.2.9200.16492 (True)

00:03.479: INFO: Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.17727 >= 6.1.7601.17727 (True)

00:03.526: INFO: Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll: 6.1.7601.17932 >= 6.1.7601.17617 (True)

00:03.526: INFO: Version Check for (KB2731771) of C:\Windows\System32\kernel32.dll: 6.1.7601.17932 >= 6.1.7601.17932 (True)

00:03.526: INFO: Checking for correct version of C:\Windows\Fonts\segoeui.ttf.

00:03.541: INFO: Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >= 6.1.7601.18010 (True)

00:04.493: INFO: Download for es-ES IE10_amd64 pack initiated. Downloading http://download.microsoft.com/download/7/F/C/7FCD6AE3-E4D4-48A7-A034-A4873F006058/es-es/amd64fre/Win6.1/cab/Windows6.1-KB2718695-x64.cab -> C:\Windows\TEMP\IE1991.tmp\IE10_amd64_es-ES.cab.

00:04.493: INFO: Waiting for 0 prerequisite downloads.

00:04.493: INFO: IEAKPRXY>>[bEGIN] Call to IEAKBeforeIEInstallation()

00:04.493: INFO: IEAKPRXY>>IEAK_DLL: IEAKBeforeIEInstallation: All Pre IE custom component installation goes here

00:04.493: INFO: IEAKPRXY>>IEAK_DLL: Queue components for the install engine [PreCustItems]:

00:04.493: INFO: IEAKPRXY>>IEAK_DLL: Group PreCustItems not found

00:04.493: INFO: IEAKPRXY>>[END] Call to IEAKBeforeIEInstallation(), return value: TRUE

00:04.509: INFO: The neutral pack was not successfully downloaded from the internet. Installation will continue using the extracted package.

00:04.602: INFO: No reboot logic message NrApiStart(0), lParam=0x00282ac8 returned 0x00000000.

00:05.866: INFO: No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.

00:05.897: INFO: No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.

00:05.897: INFO: Installing with the extracted package. C:\Windows\TEMP\IE1991.tmp\IE10-neutral.Extracted.cab

00:05.897: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1991.tmp\IE10-neutral.Extracted.cab /quiet /norestart

00:09.111: WARNING: PauseAUThread: Failed to pause Automatic Updates: 0x80070422

00:44.991: INFO: Process 'C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1991.tmp\IE10-neutral.Extracted.cab /quiet /norestart' exited with exit code 0x00003715 (14101)

00:45.022: ERROR: Neutral package installation failed (exit code = 0x00003715 (14101)).

00:45.022: INFO: No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.

00:45.022: INFO: No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.

00:45.147: INFO: No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.

00:45.147: INFO: Waiting for Active Setup to complete.

00:45.147: INFO: Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})

00:50.155: INFO: Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})

00:55.162: INFO: Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})

01:00.170: INFO: Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})

01:05.177: INFO: Waiting for Active Setup to complete. ({89820200-ECBD-11cf-8B85-00AA005B4383})

01:10.185: INFO: IEAKPRXY>>[bEGIN] Call to IEAKAfterIEInstallation(FALSE)

01:10.185: INFO: IEAKPRXY>>IEAK_DLL: IEAKAfterIEInstallation: All Post IE custom component installation goes here

01:10.185: INFO: IEAKPRXY>>IEAK_DLL: Queue components for the install engine [CustItems]:

01:10.185: INFO: IEAKPRXY>>IEAK_DLL: Group CustItems not found

01:10.185: INFO: IEAKPRXY>>[END] Call to IEAKAfterIEInstallation()

01:10.185: INFO: IEAKPRXY>>[bEGIN] Call to IEAKFinalize(TRUE)

01:10.185: INFO: IEAKPRXY>>IEAK_DLL: IEAKFinalize: Enter

01:10.918: INFO: IEAKPRXY>>IEAK_DLL: DeleteInstallIns: Deleted file C:\Program Files (x86)\Internet Explorer\Signup\install.ins.

01:10.918: INFO: IEAKPRXY>>IEAK_DLL: Queue component for the install engine [bRANDING.CAB]:

01:10.918: INFO: IEAKPRXY>>IEAK_DLL: QueueOneComponent took :0:

01:10.918: INFO: IEAKPRXY>>IEAK_DLL: Install Engine - Starting install phase

01:10.934: INFO: IEAKPRXY>>IEAK_DLL:

OnStartInstall:

Download: 0 KB

Install 2 KB

01:10.934: INFO: IEAKPRXY>>IEAK_DLL: Start : Date:5/22/2013 (M/D/Y) Time:14:23:42

01:10.934: INFO: IEAKPRXY>>IEAK_DLL: OnStartComponent:

ID: BRANDING.CAB

Download: 0 KB

Install 2 KB

01:10.949: INFO: IEAKPRXY>>IEAK_DLL: CheckTrust: C:\Windows\msdownld.tmp\AS061F42.tmp\BRANDING.CAB, Result: 1 (OK)

01:10.981: INFO: IEAKPRXY>>IEAK_DLL: File extraction: C:\Windows\msdownld.tmp\AS061F42.tmp\BRANDING.CAB, Result: 0 (OK)

01:10.981: INFO: IEAKPRXY>>IEAK_DLL: Launching Inf - inf: C:\Windows\msdownld.tmp\AS061F42.tmp\INSTALL.INF, section: Default

01:11.074: INFO: IEAKPRXY>>IEAK_DLL: SpaceUsed: Windows drive: 0 InstallDrive: 0

01:11.090: INFO: IEAKPRXY>>IEAK_DLL: Timing rates: Download: 0,Install 60000

01:11.090: INFO: IEAKPRXY>>IEAK_DLL: OnStopComponent:

ID: BRANDING.CAB

HRESULT: 0 (OK)

Phase: 8

Status: 1

01:11.090: INFO: IEAKPRXY>>IEAK_DLL: Stop : Date:5/22/2013 (M/D/Y) Time:14:23:42

01:11.090: INFO: IEAKPRXY>>IEAK_DLL:

OnStopInstall:

HRESULT: 0 (OK)

Status: 1

01:11.090: INFO: IEAKPRXY>>IEAK_DLL: Date:5/22/2013 (M/D/Y) Time:14:23:42

01:11.090: INFO: IEAKPRXY>>IEAK_DLL: InstallJob return hr:0x0: Status:1

01:11.090: INFO: IEAKPRXY>>IEAK_DLL: IEAK Finalized : Branding.cab has been installed

01:11.090: INFO: IEAKPRXY>>IEAK_DLL: IEAK Finalize: Will delay copy install.ins to %programfiles%\internet explorer\signup

01:11.090: INFO: IEAKPRXY>>IEAK_DLL: CopyInstallIns: Copying C:\Program Files (x86)\Internet Explorer\Signup\install.ins to C:\Program Files (x86)\Internet Explorer\Signup\ieak.install.ins

01:11.090: INFO: IEAKPRXY>>IEAK_DLL: CopyInstallIns: Scheduling MoveFileEx of install.ins: C:\Program Files (x86)\Internet Explorer\Signup\ieak.install.ins to C:\Program Files (x86)\Internet Explorer\Signup\install.ins

01:11.090: INFO: IEAKPRXY>>IEAK_DLL: Install Engine - object destroyed

01:11.090: INFO: IEAKPRXY>>[END] Call to IEAKFinalize(), return value: TRUE

01:17.143: WARNING: PauseAUThread: Failed to resume Automatic Updates: 0x80070422

01:17.143: INFO: Setup exit code: 0x00000BC2 (3010) - Installation Succeeded. Reboot required.

01:17.205: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE1991.tmp

01:17.252: INFO: Unable to remove directory C:\Windows\TEMP\IE1991.tmp, marking for deletion on reboot.

01:17.252: INFO: Released Internet Explorer Installer Mutex

If I remove the /update-no parameter of this, IE10 download the files and the installation goes fine. But if i want to install it without internet conection, i cant :wacko:

I have installed the package "Windows6.1-KB2718695-x64.cab" before IE10, but its the same.

Anyone kowns how to solve this?

Thanks and sorry for my english

Link to comment
Share on other sites

  • 3 weeks later...

Hi,

Has anyone actually got IE10 to install via MDT as a Package (in effect slipstreamed in) rather than an offline inject? If I add the IE10 MSU into MDT I get the following error on deployment:

FAILURE ( 5627 ): -2147418113 0x8000FFFF: Run DISM.exe

Litetouch deployment failed, Return Code = -2147467259 0x80004005

Failed to run the action: Install Operating System.

Unknown error (Error: 000015FB; Source: Unknown)

The execution of the group (install) has failed and the execution has been aborted. An action failed

Operation aborted (Error: 8004004; Source: Windows)

Failed to run the last action: Install Operating System. Execution of task sequence failed.

Unknown error (Error: 00015FB; Source: Unknown)

Task Sequence Engine failed! Code: enExecutionFail

Task sequence execution failed with error code 80004005

Error Task Sequence Manager failed to execute task sequence. Code 0x80004005

Thanks

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...