tomasz86 Posted January 30, 2013 Share Posted January 30, 2013 A few days ago I was installing XP on a fairly new laptop with an Intel graphics card integrated (don't remember what model it was exactly). The thing is that the screen was completely blank during the whole GUI part of the installation. I prepared a fully automated installation (winnt.sif) and it actually finished successfully but there was just nothing shown on the screen during the whole process. I was able to know that the system was being installed by looking at the HDD led blinking. After the installation had finished the system booted normally.Has anyone experienced such a problem? Is there any solution?I didn't integrate the graphics driver into the XP source but even if I had done it, it would have been installed later during the GUI mode. The screen went blank right after the text installation had finished and the computer rebooted. Link to comment Share on other sites More sharing options...
jaclaz Posted January 30, 2013 Share Posted January 30, 2013 A few days ago I was installing XP on a fairly new laptop with an Intel graphics card integrated (don't remember what model it was exactly). The thing is that the screen was completely blank during the whole GUI part of the installation. I prepared a fully automated installation (winnt.sif) and it actually finished successfully but there was just nothing shown on the screen during the whole process. I was able to know that the system was being installed by looking at the HDD led blinking. After the installation had finished the system booted normally.Has anyone experienced such a problem? Is there any solution?I didn't integrate the graphics driver into the XP source but even if I had done it, it would have been installed later during the GUI mode. The screen went blank right after the text installation had finished and the computer rebooted.JFYI, this kind of things sometimes (not necessatily your case) may happen also on the "display" side.I have seen this happen (and also another "queer" effect such as NOT being able to see anything in the BIOS setup) with el-cheapo LCD's that are also (I shoudl say "mainly") TV's.In practice the issue is the video card - for any reason - sending signals with a resolution/frequency that the LCD - for any reason - doesn't "hook" correctly.jaclaz Link to comment Share on other sites More sharing options...
Guest Posted January 30, 2013 Share Posted January 30, 2013 Happens here occasionally with a Radeon 5830 and an HP LP3065 monitor. Completely removing power from the tower (unplugging) restores the display. Seems to be an issue with the graphics card that a soft power down or reset does not correct. Link to comment Share on other sites More sharing options...
submix8c Posted January 30, 2013 Share Posted January 30, 2013 (edited) HAH! 5eraph - keywords = 'new laptop" (unplug is not an option is it?).... Seems the GUI-part (PnP) of the Video wasn't showing the screen until reboot. Odd...Q: How many Reboots?http://wiki.answers.com/Q/How_many_times_does_the_system_reboot_in_a_windows_XP_installationA: "3 times"1 - Textmode2 - Install <-Problem area3 - WelcomeCorrect?Maybe you mean to "power down" after Textmode then "power up"? Edited January 30, 2013 by submix8c Link to comment Share on other sites More sharing options...
Guest Posted January 30, 2013 Share Posted January 30, 2013 (edited) HAH! 5eraph - keywords = 'new laptop" (unplug is not an option is it?)Yes, it's still an option. Remove the battery. I'm aware that the circumstances differ from mine. My point was that the monitor is not always to blame. Edited January 30, 2013 by 5eraph Link to comment Share on other sites More sharing options...
tomasz86 Posted January 31, 2013 Author Share Posted January 31, 2013 Thank you for explanation It was my friend's laptop and the system is already installed now but if I ever have to reinstall it I may try to remove the battery and see if there's any difference. If not then I guess there's no easy fix for this issue apart from preparing a fully unattended installation, right? Link to comment Share on other sites More sharing options...
jaclaz Posted January 31, 2013 Share Posted January 31, 2013 My point was that the monitor is not always to blame.Well the actual point is that there are mainly two devices involved, the video card and the display.One of the two must be the culprit or concurring to the issue.In the case I cited, I could replace the monitor with an old CRT one I had around.In your case, it is *something* in the video card. (and yes, I remember vaguely something similar happening about the need of fully powering down a system between the two phases )Idea! @tomasz86Even if it's a laptop, why don't you try attaching an external monitor next time?jaclaz Link to comment Share on other sites More sharing options...
tomasz86 Posted January 31, 2013 Author Share Posted January 31, 2013 @tomasz86Even if it's a laptop, why don't you try attaching an external monitor next time?Good idea! I'll try to do it next time if I encounter such an issue. Link to comment Share on other sites More sharing options...
Ponch Posted February 2, 2013 Share Posted February 2, 2013 The screen went blank right after the text installation had finished and the computer rebooted.If you could'n even see the POST screen, it's a hardware problem.I've also had that on a Compaq laptop years ago, the screen would be blank about 1 in every 30 reboots. Link to comment Share on other sites More sharing options...
Phenomic Posted February 8, 2013 Share Posted February 8, 2013 Intel graphics HD-3000? If it works in XP maybe the driver will work in 2000 as well. Have you tried? Link to comment Share on other sites More sharing options...
tomasz86 Posted February 9, 2013 Author Share Posted February 9, 2013 Intel graphics HD-3000? If it works in XP maybe the driver will work in 2000 as well. Have you tried?I think you misunderstood the topic It's not related to Windows 2000 in any way. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now