Bartcrom Posted December 30, 2012 Share Posted December 30, 2012 Hello everyone,I hope someone can help me with this. I have to make a virtual server with a workstation (also virtual) for my school. For that I use virtual box. The workstation is windows 7 ultimate. But here is the problem. The whole server is almost done. I installed the AD's that I need and those are working super. I also have added new users for different deppartments. And thats working fine also. But the problem is the domain. On the server I created a domain. And the workstation also have to be in that domain. First I added a computer in the active directory and that was no problem. Then I added the workstation in the same domain. I can log in in the domain with my workstation. So far so good. I also added the DHCP serverrole and put all the settings. I also created a adreslease for the workstation. And its linked to the workstation. He also created a record in the looking forward zones. But I cant point to created a record in the looking reverse zones. I noticed that there was a problem with the communication of the network when I wanted to link to the drive on a partition that I created on the server, where I also created a usermap. On this map the users that use the workstation can save files. When I logged on the workstation as administrator I cant see the server, only the workstation. So I checked the network and there its the same problem. When I click network then he only see the workstation. So I went back to the server to the active directory users and computers to look at the workstation. I see the computer and I can look at the properties. But when I choose manage (in the computer management then I see a red cross at users and groups. And when I click on it then it say "computer PFWS1( thats the workstion) cannot by managed. Choose 'connect to another computer' . So you coud say there is no communication between the server and the workstation. But when I do the pingcommando from the server to the workstation and backwards then I have perfect connection. There is no delay. Also when I log on the workstation as administrator he see the domain. What I also find strange is that the workstation is not useing the ipv4adres that I put in the adresslease in the DHCPthree. I also tested that it might be the IPV4adres. On the server I use static ipv4adres and static dnsadres. And on the workstation I used dynamic ipv4adres but a static dnsadres. I used the dnsadres of t he server. So I changed the settings on the server and workstation to dynamic ipv4adresses and dynamic dnsadresses. But then I couddent choose manage. The settings on virtualbox are:For the server I have two NIC's. one Nat and the other host-onlyFor the workstation I have one NIC. NATI hope someone can help me. I dont know what to anymoreMany greets and thx for your help and time Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now