Rosewood Posted September 17, 2012 Share Posted September 17, 2012 (edited) Hello I have done a fresh install of windows 98se formatted before install took me over a hourI have a dell latitude csx 312mb ram piii 40gb laptopI purchased the belkin wireless g mimo link here. http://www.belkin.com/pressroom/bulletins/uploads/F5D9010au_PB.pdfThe problem is getting the PCMCIA card to work as it results in error. Please see jpeg below of the resulting error from the cd rom software from . I can not even download the drivers as my USB sticks won't work as plug and play on windows 98 se it keeps asking for a driver . I have no Internet access to even get to the belkin drivers and software to download on line The link to the software drivers I need is here http://en-us-support.belkin.com/app/answers/detail/a_id/500/~/f5d9010-wireless-g-plus-mimo-notebook-card---driversPlease could you help me as I need this laptop for my brother to use for his college work and research but without getting him online there's no use . I also tried connecting wired by selecting obtain address automatically in network setting then restart still no joy If you can please lend me a hand I would be happy Edited September 17, 2012 by Rosewood Link to comment Share on other sites More sharing options...
jaclaz Posted September 17, 2012 Share Posted September 17, 2012 Let me understand, if I get it right you have THREE "subsystems" that are not working properly:PCMCIA+Wireless NetworkUSBWired Networklisted in order of DEcreasing difficulty to solve.If I were you I would FORGET (temporarily) the PCMCIA + Wireless and the USB, and try to have the wired network working, then with that working solve the USB issue and with the USB working troubleshoot the PCMCIA (it is not entirely impossible that actually a conflict of some kind exists between USB and PCMCIA).BUT is this the machine?http://support.ap.dell.com/support/edocs/systems/pmac2cm/en/en_ug/specs.htmit seems like it has not a network card (wired). Can you clarify/explain/expand?BTW, JFYI - and to be picky - it is not about "proper" PCMCIA, but rather about CardBusjaclaz Link to comment Share on other sites More sharing options...
Rosewood Posted September 17, 2012 Author Share Posted September 17, 2012 (edited) You are absolutely right sirThat is indeed the machine same link as yours above http://support.ap.dell.com/support/edocs/systems/pmac2cm/en/en_ug/specs.htmIt also does not have wired card as standard but I did get a 3com Ethernet card this one here http://www.ebay.co.uk/itm/3COM-DELL-ETHERNET-CARD-10BASE-T-10BASE-2-PCMCIA-/390422311543Yes to all three Statments belowLet me understand, if I get it right you have THREE "subsystems" that are not working properly:PCMCIA+Wireless NetworkUSBWired NetworkYes I would like to try this idea let's do it your waylisted in order of DEcreasing difficulty to solve.If I were you I would FORGET (temporarily) the PCMCIA + Wireless and the USB, and try to have the wired network working, then with that working solve the USB issue and with the USB working troubleshoot the PCMCIA (it is not entirely impossible that actually a conflict of some kind exists between USB and PCMCIA).I would like to go this route as suggested by youSo can you get me online wired then? Can you tell me how to get online wired please. Can you guide me through the way you suggested Edited September 17, 2012 by Rosewood Link to comment Share on other sites More sharing options...
jaclaz Posted September 17, 2012 Share Posted September 17, 2012 (edited) So can you get me online wired then? Can you tell me how to get online wired please. Can you guide me through the way you suggestedStart doing the standard checks, remember that that Dell PCMCIA card is 10 base-T, whilst your network is most probably a 100 Base-T, you have to check if the setting in your Router/Modem/whatever are set to "auto" or you have to manually set them to 10 base-T.IMHO it would be easier if you would configure manually the TCP/IP address and subnet instead of relying to the DHCP you have (IF you have one).Go here:http://www.windowsnetworking.com/articles_tutorials/Windows_9598ME/and check the relevant tutorials, usually if there is an issue with networking, the solution can be found there.Start from this one:http://www.windowsnetworking.com/articles_tutorials/win98.htmljaclaz Edited September 17, 2012 by jaclaz Link to comment Share on other sites More sharing options...
Rosewood Posted September 17, 2012 Author Share Posted September 17, 2012 (edited) So can you get me online wired then? Can you tell me how to get online wired please. Can you guide me through the way you suggestedStart doing the standard checks, remember that that Dell PCMCIA card is 10 base-T, whilst your network is most probably a 100 Base-T, you have to check if the setting in your Router/Modem/whatever are set to "auto" or you have to manually set them to 10 base-T.IMHO it would be easier if you would configure manually the TCP/IP address and subnet instead of relying to the DHCP you have (IF you have one).Go here:http://www.windowsnetworking.com/articles_tutorials/Windows_9598ME/and check the relevant tutorials, usually if there is an issue with networking, the solution can be found there.Start from this one:http://www.windowsnetworking.com/articles_tutorials/win98.htmljaclazOk great thanks I will read up now. How would you even find out if it is 100 base t network my router is set on? Edited September 18, 2012 by Rosewood Link to comment Share on other sites More sharing options...
Rosewood Posted September 17, 2012 Author Share Posted September 17, 2012 (edited) - Edited September 18, 2012 by Rosewood Link to comment Share on other sites More sharing options...
jaclaz Posted September 18, 2012 Share Posted September 18, 2012 How would you even find out if it is 100 base t network my router is set on?Start by describing (briefly) your current network setup. (which hardware you have and more than that which subnet and subnet mask are you using).Most "standard" devices (I am talking of DSL modem/routers) tend to use:192.168.1.1255.255.255.0The built-in DHCP server (if any) will then normally assign addresses in the range 192.168.1.2 up to 192.168.1.254.Simply open a command prompt in one of the other computers you have connected to your network and in it type:ipconfig /alland press [ENTER]it will give the address of that machine and the subnet mask (besides the address of the gateway, i.e. your modem/router).If you have (say) 5 PC's in your network and the address of the one you check the DHCP assigned IP is (say) 192.168.1.18 try assigning that IP + or - 5+1=6, i.e. 192.168.1.12 or 192.168.1.24 to that Dell laptop. (this way we are relatively sure that there is no duplicate IP on the network).Then, simply try PINGing the gateway and/or the other computer of which you know the address from the Dell laptop.So do I I also select 3com ether link III ELISA 3c579Sorry I don't understand what you mean, you need to provide more details...jaclaz Link to comment Share on other sites More sharing options...
Rosewood Posted September 18, 2012 Author Share Posted September 18, 2012 (edited) Hi jaclaz. Thank you for trying to help meI'm sorry if I am being difficult please bear with me I am a very beginner at any kind of technology. Please bear with me I know you are helping me and maybe I am such a beginner I'm finding it difficult . I apologise for this:But as far as this is going let me tell you what I have tried and what stage I am at the momentI have a dell 3com fast Ethernet card. This one I also have a wireless PCMCIA card from belkin . But as you said deal with the wired firstTo start I read through the two tutorials you have given me and the steps I followed are in my pictures below I had interested the 3com ethernet card into the slot of the PCMCIA card and started the windows 98 dell laptopI am now greeted with this screen I followed to steps but it's not finding the driver and I don have the driver cd for the 3com Ethernet card After this I went manually to add hardware By following the tutorial you linked above I am now at this stageThen add choose adapterNow I am at this screen and I choose 3com as manufacture. But do not know which one to choose on the right hand side there is so many 3com network adapters listed in the windows list lease see picture belowAs a reply to which subnet or subnet mask I don't know. I'm just using a net gear router from my Internet providercan you please advised what I should do. I mean am I doing the setup correctly to get Ethernet working ? Please let me know if I am doing things wrong Edited September 18, 2012 by Rosewood Link to comment Share on other sites More sharing options...
jaclaz Posted September 18, 2012 Share Posted September 18, 2012 (edited) Hi jaclaz. Thank you for trying to help meI'm sorry if I am being difficult please bear with me I am a very beginner at any kind of technology. Please bear with me I know you are helping me and maybe I am such a beginner I'm finding it difficult . I apologise for this:No prob, everyone has been a beginner at least once and at somethng .The good news is that the 3Com card is working (in the sense that is detected correctly by Windows 98).So you need to find the drivers for it (and since the only working media you have is the CD-ROM you will have to put them on a CD-rom), or has it a floppy drive?Check the physical card for any number, the one you posted a link on e-bay is NOT the same as the picture you just posted (this latter seems a CARD BUS card, see the golden strip, which is more likely since the card is detected as being PCI) Check if the one you have is like this one:http://www.ebay.com/itm/3COM-3CCFE575BT-D-Dell-Fast-Ethernet-10-100-Base-TX-PC-Card-PCMCIA-/190716341606?pt=US_Laptop_Modem_Cards&hash=item2c67946d66IF it is this one, the driver should be this one:http://support.gateway.com/support/drivers/getfile.asp?id=13664&dscr=3com%20megahertz%2010/100%20lan%20cardbus%20pc%20card%20(3ccfe575bt)%20driver&uid=354825832jaclaz Edited September 18, 2012 by jaclaz Link to comment Share on other sites More sharing options...
Rosewood Posted September 18, 2012 Author Share Posted September 18, 2012 (edited) Hi jaclaz. Thank you for trying to help meI'm sorry if I am being difficult please bear with me I am a very beginner at any kind of technology. Please bear with me I know you are helping me and maybe I am such a beginner I'm finding it difficult . I apologise for this:No prob, everyone has been a beginner at least once and at somethng .The good news is that the 3Com card is working (in the sense that is detected correctly by Windows 98).So you need to find the drivers for it (and since the only working media you have is the CD-ROM you will have to put them on a CD-rom), or has it a floppy drive?Check the physical card for any number, the one you posted a link on e-bay is NOT the same as the picture you just posted (this latter seems a CARD BUS card, see the golden strip, which is more likely since the card is detected as being PCI) Check if the one you have is like this one:http://www.ebay.com/itm/3COM-3CCFE575BT-D-Dell-Fast-Ethernet-10-100-Base-TX-PC-Card-PCMCIA-/190716341606?pt=US_Laptop_Modem_Cards&hash=item2c67946d66IF it is this one, the driver should be this one:http://support.gateway.com/support/drivers/getfile.asp?id=13664&dscr=3com%20megahertz%2010/100%20lan%20cardbus%20pc%20card%20(3ccfe575bt)%20driver&uid=354825832jaclazYep only have a cr rom drive no floppyOk so it's a cardbus card rather than a PCMCIA card oh rightThe model number is 3CCFE575CT-D. I'm going to try and search the drivers Im not sure that the link you gave me this one url="http://support.gateway.com/support/drivers/getfile.asp?id=13664&dscr=3com%20megahertz%2010/100%20lan%20cardbus%20pc%20card%20(3ccfe575bt)%20driver&uid=354825832"]http://support.gateway.com/support/drivers/getfile.asp?id=13664&dscr=3com%20megahertz%2010/100%20lan%20cardbus%20pc%20card%20(3ccfe575bt)%20driver&uid=354825832I don't think it's for my card do you ? Do you think its for my card ?so I am searching online now please let me know if you happen to locate the driver I need I will come back with a link to double check if it's the right one unless you get a link quicker than me Edited September 18, 2012 by Rosewood Link to comment Share on other sites More sharing options...
Rosewood Posted September 18, 2012 Author Share Posted September 18, 2012 Hi jaclaz. Is there something wrong with 3com have they shut down I can't seem to find there website anywhere I tried this link from another forum I just google and it's a old post but got this URL. http://www.3com.com/products/en_US/downloadsindex.jspBut it redirects to hp website? Link to comment Share on other sites More sharing options...
jaclaz Posted September 18, 2012 Share Posted September 18, 2012 (edited) Hi jaclaz. Is there something wrong with 3com have they shut down I can't seem to find there website anywhere I tried this link from another forum I just google and it's a old post but got this URL. http://www.3com.com/products/en_US/downloadsindex.jspBut it redirects to hp website?Yep, HP bought 3com a few years ago.Yes, AFAICT the given link on gateway is the appropriate driver.You can however try the fe575cx.exe file here:http://www.ictcompany.com/store/support_download.php http://www.ictcompany.com/Drivers/3ccfe575bt/fe575cx.exeYou can also check if among the drivers you have in the "Windows" list (scrolling down) there is one for the 3C575 .You can check on the old 3Com page how the drivers are for "series" of cards:http://web.archive.org/web/20050312092813/http://www.3com.com/products/en_US/prodlist.jsp?tab=cat&pathtype=download&cat=10&selcat=PC+Cards&family=68http://web.archive.org/web/20040817075252/http://www.3com.com/products/en_US/result.jsp?selected=all&sku=3C3FE575CT&sort=effdt&order=descIt seems ike latest is fe575291.exe, that you can probably get from here:http://www.filewatcher.com/m/fe575291.exe.738816.0.0.htmljaclaz Edited September 18, 2012 by jaclaz Link to comment Share on other sites More sharing options...
Rosewood Posted September 18, 2012 Author Share Posted September 18, 2012 Thank you very much jaclaz for all of your help and support. And thank you for the helpful link to the driver I will Load the drivers to a blank cd some time today and will let you know how I get on hopefully I can get this machine workingBtw I have downloaded all the driver just in case so will burn them to cd when I get a blank cd some time todayOnce again many thanks jaclaz for your time and support Link to comment Share on other sites More sharing options...
Rosewood Posted September 18, 2012 Author Share Posted September 18, 2012 (edited) Hi jaclezI have run into a few problems. The drivers I burnt to cd don't seem to show up in the windows 98 laptop and when I cookies the Ethernet from the list it asks for the windows 98 cd I insert the cd but still can not find please see my photos below .You might get a clear idea to what's going wrongPlease can you advised what's my best option as of now after seeing the results Edited September 18, 2012 by Rosewood Link to comment Share on other sites More sharing options...
jaclaz Posted September 19, 2012 Share Posted September 19, 2012 Wait a minute.It seems to me like you have an issue copying the drivers to the CD.What program are you using?The drivers, which I verified you can get from here:ftp://134.100.120.22/pub/mirrors/3com_nic/3c3fe575c/fe575291.exeare inside a (self-extracting) Winzip archive.What you should do is (on the "other" computer) create a new directory , let's say C:\3comNic\ and extract to that directory the archive, you can dobleckick on the downloaded file and tell it to extract to that folder.Then, you burn the whole folder to the CD.A recommended app is IMGBURN:http://www.imgburn.com/but you can use *any* burning tool you are familiar with, since you are going anyway to "waste" a CD, you could add to the new CD also a copy of the contents of the windows CD, the screenshots you posted seem to say that a missing file is inside the actual Win98 CD, but this could also be because you have (seemingly) NO files in the "driiver" CD you made.jaclaz Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now