measurement on a 200mm fan with a circular frame

[neovikingx]

I need measurement on a 200mm fan with a circular frame like

APEVIA CF20SL-UBL 200mm Ultra violet LED Case Fan

COOLER MASTER R4-LUS-07AB-GP

I need to know what the distance is between the top 2 screw holes center to center.

Im trying ti see if it fits my case screw mounts.

Thanks

[bphlpt]

All 200mm fans should have the same mounting screw locations, so if your case has mounting points for a 200mm fan, your manual should mention it specifically, it should fit.

Cheers and Regards

[jaclaz]

Yes an no.

"Main" holes should be 154 mm (square):

http://www.bitfenix.com/global/en/products/accessories/spectre-pro#specs

http://files.bitfenix.com/productguides/Spectre%20Pro%20200mm%20Diagram.jpg

jaclaz

[neovikingx]

Thanks for the info

My side panel was made made to use a 180mm fan, but I think there is enough room to us a 200mm fan.

With that diagram it should help.

Are most of the 200mm screw mounts in the same location?

Thank you

[bphlpt]

Are most of the 200mm screw mounts in the same location?

All 200mm fans should have the same mounting screw locations...

Just because there is enough room doesn't mean the mounting holes will line up, but since the 180mm fans are usually square I guess it's possible. Unlike jaclaz, I was not able to come up with an appropriate drawing, with dimensions, for a 180mm fan so you'll have to measure. I even saw mention of adapter plates to adapt one size opening to another size fan, but was also not able to come up with a relevant drawing with dimensions. Sorry.

Cheers and Regards

Edited September 14, 2012 by bphlpt