doveman Posted August 4, 2012 Share Posted August 4, 2012 I installed the latest ATI Catalyst 12.6 and SB drivers and now it BSOD on booting. In Safe Mode it shows the last thing to load before BSOD is atipcie.sys.I've managed to boot in Last Known Good configuration now but I guess I should try and fix the problems and boot into the previously working config. How do I even get back to that, as it seems if a Last Known Good boot is successful that becomes the default (now the registry shows Current=2, Default=2, Failed=1, LastKnownGood=3) so do I have to edit the registry to change Default back to 1 (and do I have to delete the Failed line or just the 1 part?)Anyway, before that I need to fix whatever is causing atipcie.sys to cause it to BSOD on boot if anyone knows why or how to fix it? Link to comment Share on other sites More sharing options...
myselfidem Posted August 5, 2012 Share Posted August 5, 2012 Maybe you can find useful infos here:AMD Catalyst™ Software Suite Version 12.6 Release Notes Check if you need NET Framework SP1 for your OS!Caution:The AMD Catalyst Control Center/AMD Vision Engine Control Center requires that the Microsoft® .NET Framework SP1 be installed for Windows XP and Windows Vista. Without .NET SP1 installed, the AMD Catalyst Control Center/AMD Vision Engine Control Center will not launch properly and the user will see an error message. Maybe you need to uinstall ATI 12.6 with Safe mode and install the working ATI previous version. Link to comment Share on other sites More sharing options...
doveman Posted August 5, 2012 Author Share Posted August 5, 2012 I think NET is only needed to open CCC and the lack of it wouldn't cause a BSOD on booting. As I mentioned, I can't boot in Safe Mode as that BSOD on booting as well.I think the problem (atipcie.sys) might be with the SB drivers rather than the video driver Link to comment Share on other sites More sharing options...
myselfidem Posted August 5, 2012 Share Posted August 5, 2012 (edited) You can try to start your computer and if you see the BSOD, just wait and after some time Windows may start!Which OS do you have installed?Tool to repair (not tested):Fix Blue Screen Of Death in 2 MinutesResolving stop (blue screen) errors in Windows 7 Edited August 5, 2012 by myselfidem Link to comment Share on other sites More sharing options...
doveman Posted August 5, 2012 Author Share Posted August 5, 2012 I've never seen Windows start after a BSOD error when booting!I'm using Win7 x64. I don't think I'll be using that (untested) tool. As I can boot in LKG I can probably just disable the dodgy driver from loading in ControlSet001 once I'm sure what to disable. Link to comment Share on other sites More sharing options...
myselfidem Posted August 5, 2012 Share Posted August 5, 2012 I've never seen Windows start after a BSOD error when booting!I see Windows may start only if you see at the bottom of the BSOD an increasing number (like 60-90-120) and the computer restart and Windows boot!Happens to me many times with Windows XP.Maybe that can help you also: Link to comment Share on other sites More sharing options...
MagicAndre1981 Posted August 5, 2012 Share Posted August 5, 2012 is this your BIOStar or Gigabyte board? Try to disable the onboard GPU on the Biostar. Mabe this helps. Link to comment Share on other sites More sharing options...
doveman Posted August 5, 2012 Author Share Posted August 5, 2012 It's my Gigabyte http://www.gigabyte.com/products/product-page.aspx?pid=3004#I've already got the onboard GPU disabled and have a 6850 card in there. Link to comment Share on other sites More sharing options...
jaclaz Posted August 5, 2012 Share Posted August 5, 2012 (edited) I see Windows may start only if you see at the bottom of the BSOD an increasing number (like 60-90-120) and the computer restart and Windows boot!Happens to me many times with Windows XP.Though it would not be the first time that the good MS guys misname things, a BSOD is actually a way to show you a STOP ERROR, and after a STOP, the computer is HALTed. I have never seen in my whole life a PC with a NT based system "revive" and start after a BSOD, and I would be interested if you could expand on your experience.@dovemanBSOD means "nothing" it's the STOP ERROR number that may give some hint on the cause.Having last driver loaded being atipcie.sys as well says "nothing", that is the last driver loaded (and the failure is usually on the NEXT one that is not listed as it is not loaded, as it actually fails while loading and before anything is written to screen) jaclaz Edited August 5, 2012 by jaclaz Link to comment Share on other sites More sharing options...
doveman Posted August 5, 2012 Author Share Posted August 5, 2012 OK, I'll note the STOP ERROR next time I try it.Am I right about needing to edit the registry to change Default back to 1 and deleting the Failed line to boot into the faulty ControlSet again or is there a better/more correct way? Link to comment Share on other sites More sharing options...
jaclaz Posted August 5, 2012 Share Posted August 5, 2012 (edited) Am I right about needing to edit the registry to change Default back to 1 and deleting the Failed line to boot into the faulty ControlSet again or is there a better/more correct way?Leave the Registry alone.Do make a backup of it "as is" using ERUNT and leave it "as is", if you edit incorrectly the configurations set you may get an unbootable system.Once thing are fixed, we will talk of resetting the Registry.jaclaz Edited August 5, 2012 by jaclaz Link to comment Share on other sites More sharing options...
doveman Posted August 5, 2012 Author Share Posted August 5, 2012 Leave the Registry alone.Do make a backup of it "as is" using ERUNT and leave it "as is", if you edit incorrectly the configurations set you may get an unbootable system.Once thing are fixed, we will talk of resetting the Registry.jaclazAll very well but then I can't boot into the faulty ControlSet and check the STOP ERROR message. Link to comment Share on other sites More sharing options...
jaclaz Posted August 5, 2012 Share Posted August 5, 2012 All very well but then I can't boot into the faulty ControlSet and check the STOP ERROR message.Well, if you reinstall the stupid driver and it is actually the culprit, you will be again in the same situation.... jaclaz Link to comment Share on other sites More sharing options...
myselfidem Posted August 5, 2012 Share Posted August 5, 2012 (edited) I found on a french forum a guy solving the problem removing and replacing the memory modules (RAM)!And after Windows start fine...But of course you need to remove the bad driver.http://www.inforumatique.fr/forum/ecran-bleu-physical-memory-dump-t9529.html Edited August 5, 2012 by myselfidem Link to comment Share on other sites More sharing options...
doveman Posted August 5, 2012 Author Share Posted August 5, 2012 All very well but then I can't boot into the faulty ControlSet and check the STOP ERROR message.Well, if you reinstall the stupid driver and it is actually the culprit, you will be again in the same situation.... jaclazYeah, I'd rather not mess up ANOTHER ControlSet, as at least I can use this one (2) in the meantime whilst I try and find out what went wrong with the other one (1). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now