Chistoph2804 Posted April 20, 2011 Share Posted April 20, 2011 Helllo my Drive was not found anymore on my computer!I read much bout firmware problems.I build some parts to contact the drive,Here is the output of putty:Rst 0x40MRW: Disc Ctlr Initialization Completed. MC Internal LPC Process(P) SATA Reset User Data Base 00991AE8 MCMainPOR: Start: Check MCMT Version: Current MCMainPOR: Non-Init Case MC Seg Disc and Cache Nodes: 4011985C 4011796C Seg Write Preamble VBM start: 000010A7 end: 000010CE Footer - start: 000010D0 end: 000010F7 Seg Read Preamble VBM - start: 000010F9 end: 00001120 Footer - start: 00001122 end: 00001149Reconstruction: MCMT Reconstruction Start Max number of MC segments 22E0 Nonvolatile MCMT sequence number 00004548 [RSRS] 09EFReconstruction: EXCEPTION: Segment Overall Sequence Number Mismatch 00001BA4 00000000[MCMTWS]Reconstruction Fail: Burly Case MCMainPOR: MCTBufferPtr->Header.MCStateFlagsDisc = 00001001 MCMainPOR: MCTBufferPtr->Header.MCTStateFlags = 0000002A MCMainPOR: MCStateFlags = 00001001 MCMainPOR: Feature Disabled...No HOST FIS-ReadyStatusFlags 0002A1E1Can anyone help me ?What commands i had to type? Link to comment Share on other sites More sharing options...
Ponch Posted April 21, 2011 Share Posted April 21, 2011 I read much bout firmware problems.Have you checked this part of the forum (and its "read me first" thread)? Link to comment Share on other sites More sharing options...
jaclaz Posted April 21, 2011 Share Posted April 21, 2011 The ST2000dl003 is NOT a 7200.11.IF it suffers from the same kind of problems, this is the only resource I know of (and links within it):jaclaz Link to comment Share on other sites More sharing options...
liuhpok Posted May 23, 2011 Share Posted May 23, 2011 hope the latest news。 Link to comment Share on other sites More sharing options...
fjaved Posted September 19, 2012 Share Posted September 19, 2012 I have ST2000DL003 with firmware CC98. When i connect to PC it takes a while show it self for few second , after few second it will make itself inaccessible. i connected to serial console to get rid of bsy error because it spins continuously . When i place card on motor or head terminal it will not respond but if i connect to serial console without placing car it show following Rst 0x40M(P) SATA Resetand shows FT> prompt when i press ctrl+zCan someone please help me what to do from this point onward? Link to comment Share on other sites More sharing options...
jaclaz Posted September 19, 2012 Share Posted September 19, 2012 Can someone please help me what to do from this point onward?The ONLY set of instructions we have are here (and they are not validated by any other member, so more than the usual YMMV )(already linked to thread):specifically the quote in this post:jaclaz Link to comment Share on other sites More sharing options...
fjaved Posted September 20, 2012 Share Posted September 20, 2012 (edited) I completed all the steps but drive is still in busy state, continuous spinninghere is the logRst 0x40M(P) SATA ResetASCII Diag modeF3 T>Banshee Bogart, RAP17, add 6k SAP csys 4K QNCProduct FamilyId: 4F, MemberId: 02HDA SN: 5YD3CMXZ, RPM: 5939, Wedges: 1F8, Heads: 6, OrigHeads: 6, Lbas: 00001D326C41, PreampType: A8 15PCBA SN: 0000K1364D7E, Controller: BANSHEEST_2_0(8000)(4-00-0-0), Channel: Unknown, PowerAsic: MCKINLEY DESKTOP LITE Rev 91, BufferBytes: 4000000Package Version: BGC15D.CCD9.AAB600.CC98 , Package P/N: 100655416, Package Global ID: 00188399,Package Build Date: 01/05/2011, Package Build Time: 13:03:40, Package CFW Version: BGC1.CCD9.00310163.00188399,Package SFW1 Version: D556, Package SFW2 Version: ----, Package SFW3 Version: ----, Package SFW4 Version: ----Controller FW Rev: 01051303, CustomerRel: CC98, Changelist: 00310163, ProdType: BGC1.CCD9, Date: 01/05/2011, Time: 130340, UserId: 00188399Servo FW Rev: D556RAP FW Implementation Key: 11, Format Rev: 0302, Contents Rev: BB 03 09 00Features:- Quadradic Equation AFH enabled- VBAR with adjustable zone boundaries enabled- Volume Based Sparing enabled- IOEDC enabled- IOECC enabled- DERP Read Retries enabled- LTTC-UDR2 compiled off Edited September 20, 2012 by fjaved Link to comment Share on other sites More sharing options...
jaclaz Posted September 20, 2012 Share Posted September 20, 2012 I completed all the steps but drive is still in busy state, continuous spinningBut does it spin down when you issue the corresponding Z command?jaclaz Link to comment Share on other sites More sharing options...
fjaved Posted September 20, 2012 Share Posted September 20, 2012 (edited) Yes , it respond to all commands perfectly. Do i need to short the pins? If i place card under pcb to block access to motor or head it will not respond, so i am connecting without placing any card . Edited September 20, 2012 by fjaved Link to comment Share on other sites More sharing options...
jaclaz Posted September 20, 2012 Share Posted September 20, 2012 Yes , it respond to all commands perfectly. Do i need to short the pins? If i place card under pcb to block access to motor or head it will not respond, so i am connecting with placing any card .No.You are not in the same situation as described in the mentioned thread.In that situation the firmware enters in a kind of loop, doesn't accept commands, shows continuoausly a LED:00000xyz FAddr:0000mnop kind of error and detaching the board (completely and/or just the head or the motor and - in some cases shorting the read channel) is a way to exit that loop and make the interface accept the commands.The whole point, in your situation, is that we don't know WHICH commands (if existing at all) may correct the issue that makes the drive spin continuously and be BSY.The "common" issue is a continuous loop of the firmware that creates the BSY state, your particular one is evidently - while still a BSY - caused by "something else".You have to understand that all we know are "crumbs" , see:jaclaz Link to comment Share on other sites More sharing options...
fjaved Posted September 20, 2012 Share Posted September 20, 2012 Sorry for a typo , i meant to say "i am connecting hard drive without placing any card etc". Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now