alucke Posted September 3, 2010 Share Posted September 3, 2010 I am have an AMD Phenom 9850x4 black edition processor that started running hot earlier this week. When i first got the CPU it would idle around 37C and 47-50 with a full load. Earlier this week i noticed that the CPU would idle around 47C. Today i noticed that its idling around 58-60C. So I shut the computer down. My house has AC, which is set at 70F. Is this a sign that the CPU is going bad? Any help would be appreciated?alucke Link to comment Share on other sites More sharing options...
puntoMX Posted September 3, 2010 Share Posted September 3, 2010 Check the cooler and replace the paste/pad between the cooler and CPU. Report back on what you found. Link to comment Share on other sites More sharing options...
alucke Posted September 4, 2010 Author Share Posted September 4, 2010 I have done that several times, thinking i put to much paste on. It is still idling at 58-60C. Link to comment Share on other sites More sharing options...
puntoMX Posted September 4, 2010 Share Posted September 4, 2010 Too much paste works the other way around indeed, just use it as paint, not like filling up holes in a wall or so Link to comment Share on other sites More sharing options...
alucke Posted September 4, 2010 Author Share Posted September 4, 2010 (edited) i use AS5. I have tried every way possible, from a little dot to using it as paint. i even purchased a corsair H50, and that didn't even do a thing. i never overclock my computer, so everything is stock. Edited September 4, 2010 by alucke Link to comment Share on other sites More sharing options...
Zenskas Posted September 4, 2010 Share Posted September 4, 2010 (edited) If you have a H50 and are not getting better temps than the standard cooler then something is not right. Can you post a picture of your PC with the side panel off? Would make it easy to see any major problem (like fans not plugged in!). Could be the temp sensor going way off. Try a different program to view temps. Edited September 5, 2010 by Zenskas Link to comment Share on other sites More sharing options...
Junior2613 Posted October 9, 2010 Share Posted October 9, 2010 Seeing as you have a H50 did you install it with the radiator fan pumping air INTO the case or did you do it the other way round. Might not be right but it may help. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now