Jump to content

cannot install xp on intel GBF865


Recommended Posts

can some one help me i cannot install windows xp on my intel VIA USB GBF865 motherboard with IDE PATA 80gb harddisk

i have bluescreen problem 0x0000007b

i try all possible thinks posted on this forum like ntdetect.com , BIOS changing ,,,but no success

Link to comment
Share on other sites


i try all possible thinks posted on this forum like ntdetect.com , BIOS changing ,,,but no success

Hmmm. Really all?

When does the 0x0000007b happens?

Dring install or at first reboot? (or in other words when it is bootng from USB or when it attempts booting from the IDE drive?)

What about PLoP?

WHICH method are you using?

With WHICH settings/choices?

jaclaz

Link to comment
Share on other sites

i try all possible thinks posted on this forum like ntdetect.com , BIOS changing ,,,but no success

Hmmm. Really all?

When does the 0x0000007b happens?

Dring install or at first reboot? (or in other words when it is bootng from USB or when it attempts booting from the IDE drive?)

What about PLoP?

WHICH method are you using?

With WHICH settings/choices?

jaclaz

it comes during installation windows xp from usb only exactly before when installation shows partitions of IDE ,from cd rom its ok my system working fine !!

and same usb stick i can install xp in other motherboards like HP+intel or DELL working ok, but not on intel GBF865!!

i format my usb stick throu :HP USB Disk Storage Format Tool: in ntfs

and use to make bootable usb :WinSetupFromUSB_1-0-beta6.exe: with default settings

i try different types of windows xp also like windowsxp2010.iso,,WINXPSP3SATA.iso

Windows.xp.sp3.5512.cdr.august.2008.with.sata+raid

i don't know much about plop!! can you help

Edited by mirfanmian
Link to comment
Share on other sites

it comes during installation windows xp from usb only exactly before when installation shows partitions of IDE ,from cd rom its ok my system working fine !!

and same usb stick i can install xp in other motherboards like HP+intel or DELL working ok, but not on intel GBF865!!

i format my usb stick throu :HP USB Disk Storage Format Tool: in ntfs

and use to make bootable usb :WinSetupFromUSB_1-0-beta6.exe: with default settings

i don't know much about plop!! can you help

Very, very strange. :unsure:

No, PLoP won't make a difference, it could have if the problem was USB related, but it sounds a lot more like a problem with the internal disk (which does not make much sense if it's an IDE device).

Does the motherboard use the "Standard Dual PCI IDE" driver or anyway it uses another one normally?

Or, more generally, has your source any integrated drivers?

It sounds a lot like a conflict of some kind, but right now I have no ideas on how to check/troubleshoot it.

Let's see if Ilko has some. :)

jaclaz

Link to comment
Share on other sites

it comes during installation windows xp from usb only exactly before when installation shows partitions of IDE ,from cd rom its ok my system working fine !!

and same usb stick i can install xp in other motherboards like HP+intel or DELL working ok, but not on intel GBF865!!

i format my usb stick throu :HP USB Disk Storage Format Tool: in ntfs

and use to make bootable usb :WinSetupFromUSB_1-0-beta6.exe: with default settings

i don't know much about plop!! can you help

Very, very strange. :unsure:

No, PLoP won't make a difference, it could have if the problem was USB related, but it sounds a lot more like a problem with the internal disk (which does not make much sense if it's an IDE device).

Does the motherboard use the "Standard Dual PCI IDE" driver or anyway it uses another one normally?

Or, more generally, has your source any integrated drivers?

It sounds a lot like a conflict of some kind, but right now I have no ideas on how to check/troubleshoot it.

Let's see if Ilko has some. :)

jaclaz

thanks for reply :yes:

Link to comment
Share on other sites

Where did you put the modified ntdetect.com?

You have 2 options:

1) Put it in your source and then run WinSetupFromUSB to prepare the USB stick

2) If stick is already prepared replace the original one in the small ISO file in \WINSETUP folder on your USB stick

Link to comment
Share on other sites

Where did you put the modified ntdetect.com?

You have 2 options:

1) Put it in your source and then run WinSetupFromUSB to prepare the USB stick

2) If stick is already prepared replace the original one in the small ISO file in \WINSETUP folder on your USB stick

ilko_t sir you are great finally i found the solution

i think this is the final solution for bluescreen :thumbup :thumbup

now i can istall windows xp via USB on my intel GBF865

thanksssssssssssssssssssssssssssssssssssssss :thumbup :thumbup

sorry for my first post

Edited by mirfanmian
Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...