Jump to content

RT Seven Lite - RC build 1.7.0 and Beta build 2.6.0


Recommended Posts

I did some adjustments...

* You can now set priority level

* Change start Menu ORB

* Select logon screen in two ways either by selecting direct DLL or JPG.

* Added two languages like Simplified Chinese and Traditional Chinese

* Some minor errors are fixed

Could you please add the ability for the user to specify the location of whatever separately installed files/directories RT7Lite requires for operation? (WAIK, WAIK sub-components, dism, etc) It needs to be able to be set BEFORE RT7Lite is shown where the source OS files are.

I have fought with this error for almost a week now with no solution. WAIK-Win7 uninstalled/reinstalled, system32 & SysWOW64 dism directories copied from a separate Win7 x64 machine and used to replaced the ones on my machine. Nothing is working to get RT7Lite to run.

2010-05-07 11:36:25, Error                 DISM   DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmountedimageinfo.cpp:317 - CWimMountedImageInfo::Initialize(hr:0x80070057)

2010-05-07 11:36:25, Error DISM DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmountedimageinfo.cpp:94 - CWimMountedImageInfo::CreateWimMountedImageInfo(hr:0x80070057)

2010-05-07 11:36:25, Error DISM DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimimage.cpp:497 - CWimImage::InternalGetStatus(hr:0x80070057)

2010-05-07 11:36:25, Error DISM DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:1039 - CWimManager::InternalOpUnmount(hr:0x80070057)

2010-05-07 11:36:25, Error DISM DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:2318 - CWimManager::InternalCmdUnmount(hr:0x80070057)

2010-05-07 11:36:25, Error DISM DISM WIM Provider: PID=3012 Error executing command - CWimManager::InternalExecuteCmd(hr:0x80070057)

2010-05-07 11:36:25, Error DISM DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:516 - CWimManager::ExecuteCmdLine(hr:0x80070057)

post-276342-127325870861_thumb.jpg

Link to comment
Share on other sites


I did some adjustments...

* You can now set priority level

* Change start Menu ORB

* Select logon screen in two ways either by selecting direct DLL or JPG.

* Added two languages like Simplified Chinese and Traditional Chinese

* Some minor errors are fixed

bensam, could you please increase the startup sound limit to 15 seconds, I BEG YOU!!! :lol:

Link to comment
Share on other sites

I did some adjustments...

* You can now set priority level

* Change start Menu ORB

* Select logon screen in two ways either by selecting direct DLL or JPG.

* Added two languages like Simplified Chinese and Traditional Chinese

* Some minor errors are fixed

Could you please add the ability for the user to specify the location of whatever separately installed files/directories RT7Lite requires for operation? (WAIK, WAIK sub-components, dism, etc) It needs to be able to be set BEFORE RT7Lite is shown where the source OS files are.

I have fought with this error for almost a week now with no solution. WAIK-Win7 uninstalled/reinstalled, system32 & SysWOW64 dism directories copied from a separate Win7 x64 machine and used to replaced the ones on my machine. Nothing is working to get RT7Lite to run.

2010-05-07 11:36:25, Error                 DISM   DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmountedimageinfo.cpp:317 - CWimMountedImageInfo::Initialize(hr:0x80070057)

2010-05-07 11:36:25, Error DISM DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmountedimageinfo.cpp:94 - CWimMountedImageInfo::CreateWimMountedImageInfo(hr:0x80070057)

2010-05-07 11:36:25, Error DISM DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimimage.cpp:497 - CWimImage::InternalGetStatus(hr:0x80070057)

2010-05-07 11:36:25, Error DISM DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:1039 - CWimManager::InternalOpUnmount(hr:0x80070057)

2010-05-07 11:36:25, Error DISM DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:2318 - CWimManager::InternalCmdUnmount(hr:0x80070057)

2010-05-07 11:36:25, Error DISM DISM WIM Provider: PID=3012 Error executing command - CWimManager::InternalExecuteCmd(hr:0x80070057)

2010-05-07 11:36:25, Error DISM DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:516 - CWimManager::ExecuteCmdLine(hr:0x80070057)

This is due to wimfltr.sys is registered not wimmount.sys...try installing wimmount.sys driver and restart your PC

Link to comment
Share on other sites

This is due to wimfltr.sys is registered not wimmount.sys...try installing wimmount.sys driver and restart your PC

Wimmount.sys was re-installed using "WimMountInstall.exe /install" via admin command line.

After rebooting I tried to run RT7Lite and I got the "WAIK Installation" prompt as if RT7Lite did not understand that I did have WAIK-Win7 installed.

Reinstalled WAIK, set wimmount.sys again as described above, and I still get the RT7Lite "WAIK Installation" prompt.

Any ideas?

Link to comment
Share on other sites

I do not know if it is a problem already discussed but I have problems to integrate the update. The procedure starts correctly, but in reality does not integrate anything. The green progress bar indicates the progress of integration but ends too soon as if the process was skipped.The source and the update folder are located in a main disk like "C:".

Edited by Zumoc
Link to comment
Share on other sites

This is due to wimfltr.sys is registered not wimmount.sys...try installing wimmount.sys driver and restart your PC

Wimmount.sys was re-installed using "WimMountInstall.exe /install" via admin command line.

After rebooting I tried to run RT7Lite and I got the "WAIK Installation" prompt as if RT7Lite did not understand that I did have WAIK-Win7 installed.

Reinstalled WAIK, set wimmount.sys again as described above, and I still get the RT7Lite "WAIK Installation" prompt.

Any ideas?

I had the same problem.Intrestingly i did a complete Win7 reinstall on my machine.Installed 7 Lite and then installed WAIK and behold - no more prompt :thumbup

Edited by Tomorrow
Link to comment
Share on other sites

Hi ben,

i finally tried your tool. The first thing i noticed is that loading the image is very slow.

I think that loading the information from the image can be done alot faster maybe you can look at this.

Link to comment
Share on other sites

I had the same problem.Intrestingly i did a complete Win7 reinstall on my machine.Installed 7 Lite and then installed WAIK and behold - no more prompt :thumbup

Totally unnecessary

I may be confused to what they have on, hadn't been over here in awhile with adding language to my App

If old waik was on like used with Vlite then Uninstall old waik, delete files and reg and then install new waik if needed

Find and delete all wimmount.sys, wimserv.exe, wimfltr.sys

C:\Windows\System32\drivers

C:\Windows\SysWOW64\drivers

C:\Windows\winsxs\amd64_microsoft-windows-wimgapi.resources_31bf3856ad364e35_6.1.7600.16385_en-us_754c85adda333570

C:\Windows\winsxs\amd64_microsoft-windows-wimgapi_31bf3856ad364e35_6.1.7600.16385_none_e4f094112e8f905d

C:\Windows\winsxs\x86_microsoft-windows-wimgapi.resources_31bf3856ad364e35_6.1.7600.16385_en-us_192dea2a21d5c43a

C:\Windows\winsxs\x86_microsoft-windows-wimgapi_31bf3856ad364e35_6.1.7600.16385_none_88d1f88d76321f27

[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WIMMount]

[-HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\Root\LEGACY_WIMMOUNT]

[-HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\Root\LEGACY_WIMMOUNT]

[-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_WIMMOUNT]

Thats basic since i can't find the old Waik wimmount.inf here right now but it shows all this

Edited by maxXPsoft
Link to comment
Share on other sites

Hi ben,

i finally tried your tool. The first thing i noticed is that loading the image is very slow.

I think that loading the information from the image can be done alot faster maybe you can look at this.

Yes...actually in the beginning i used imagex and dism to mount....but from 1.0.5 i jumped to wimgapi.dll

In spanish version it tooks only 30 secs to complete the whole process but in English version but lots of loads, taking some 4 mins....I will check this. Thank you for testing friend...

Edited by bensam56
Link to comment
Share on other sites

I had the same problem.Intrestingly i did a complete Win7 reinstall on my machine.Installed 7 Lite and then installed WAIK and behold - no more prompt :thumbup

Totally unnecessary

I may be confused to what they have on, hadn't been over here in awhile with adding language to my App

If old waik was on like used with Vlite then Uninstall old waik, delete files and reg and then install new waik if needed

Find and delete all wimmount.sys, wimserv.exe, wimfltr.sys

C:\Windows\System32\drivers

C:\Windows\SysWOW64\drivers

C:\Windows\winsxs\amd64_microsoft-windows-wimgapi.resources_31bf3856ad364e35_6.1.7600.16385_en-us_754c85adda333570

C:\Windows\winsxs\amd64_microsoft-windows-wimgapi_31bf3856ad364e35_6.1.7600.16385_none_e4f094112e8f905d

C:\Windows\winsxs\x86_microsoft-windows-wimgapi.resources_31bf3856ad364e35_6.1.7600.16385_en-us_192dea2a21d5c43a

C:\Windows\winsxs\x86_microsoft-windows-wimgapi_31bf3856ad364e35_6.1.7600.16385_none_88d1f88d76321f27

[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WIMMount]

[-HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\Root\LEGACY_WIMMOUNT]

[-HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\Root\LEGACY_WIMMOUNT]

[-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_WIMMOUNT]

Thats basic since i can't find the old Waik wimmount.inf here right now but it shows all this

Well my old install was broken beyond repair anyway and besides clean install isnt something new to me.

Link to comment
Share on other sites

I get an unhandled exception on pressing the 'Commit' button after selecting the features for removal.

It says,

An invalid name request was made. The name requested cannot be retrieved at this time.

Here is the detailed error log:

------------------------------------------

See the end of this message for details on invoking

just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************

System.IO.IOException: An invalid name request was made. The name requested cannot be retrieved at this time.

at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)

at System.IO.File.Delete(String path)

at RTWin7Lite.RT7LiteHome.btn_log_Commit_Click(Object sender, EventArgs e) in D:\Ben\4-8-2010\Final_state\RTWin7Lite\RTWin7Lite\RT7LiteHome.vb:line 2888

at System.Windows.Forms.Control.OnClick(EventArgs e)

at System.Windows.Forms.Button.OnClick(EventArgs e)

at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)

at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)

at System.Windows.Forms.Control.WndProc(Message& m)

at System.Windows.Forms.ButtonBase.WndProc(Message& m)

at System.Windows.Forms.Button.WndProc(Message& m)

at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)

at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)

at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

************** Loaded Assemblies **************

mscorlib

Assembly Version: 2.0.0.0

Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)

CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll

----------------------------------------

RTWin7Lite

Assembly Version: 1.0.6.0

Win32 Version: 1.0.6.0

CodeBase: file:///C:/Program%20Files/RT%207%20Lite/RTWin7Lite.exe

----------------------------------------

Microsoft.VisualBasic

Assembly Version: 8.0.0.0

Win32 Version: 8.0.50727.4927 (NetFXspW7.050727-4900)

CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll

----------------------------------------

System

Assembly Version: 2.0.0.0

Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)

CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll

----------------------------------------

System.Windows.Forms

Assembly Version: 2.0.0.0

Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)

CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll

----------------------------------------

System.Drawing

Assembly Version: 2.0.0.0

Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)

CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll

----------------------------------------

System.Runtime.Remoting

Assembly Version: 2.0.0.0

Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)

CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll

----------------------------------------

RTWin7Lite.resources

Assembly Version: 1.0.6.0

Win32 Version: 1.0.6.0

CodeBase: file:///C:/Program%20Files/RT%207%20Lite/en-US/RTWin7Lite.resources.DLL

----------------------------------------

System.Configuration

Assembly Version: 2.0.0.0

Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)

CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll

----------------------------------------

System.Xml

Assembly Version: 2.0.0.0

Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)

CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll

----------------------------------------

Accessibility

Assembly Version: 2.0.0.0

Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)

CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll

----------------------------------------

************** JIT Debugging **************

To enable just-in-time (JIT) debugging, the .config file for this

application or computer (machine.config) must have the

jitDebugging value set in the system.windows.forms section.

The application must also be compiled with debugging

enabled.

For example:

<configuration>

<system.windows.forms jitDebugging="true" />

</configuration>

When JIT debugging is enabled, any unhandled exception

will be sent to the JIT debugger registered on the computer

rather than be handled by this dialog box.

Can someone tell me what is wrong please?

By the way, this is my first post guys, hello to all!

Link to comment
Share on other sites

I get an unhandled exception on pressing the 'Commit' button after selecting the features for removal.

It says,

An invalid name request was made. The name requested cannot be retrieved at this time.

By the way, this is my first post guys, hello to all!

Did you installed wimmount driver from WAIK? Whats your host OS? Which version of rt 7 lite you are using?

Edited by bensam56
Link to comment
Share on other sites

Hi ben,

i finally tried your tool. The first thing i noticed is that loading the image is very slow.

I think that loading the information from the image can be done alot faster maybe you can look at this.

Yes...actually in the beginning i used imagex and dism to mount....but from 1.0.5 i jumped to wimgapi.dll

In spanish version it tooks only 30 secs to complete the whole process but in English version but lots of loads, taking some 4 mins....I will check this. Thank you for testing friend...

The italian version is fast enough. 30sec but not even 4 minutes. I think that put us just over a minute. Note that to decompress from 8 to 12GB of image in the temporary folder.

Edited by Zumoc
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...