Tripredacus Posted January 6, 2010 Share Posted January 6, 2010 I've got some questions about which Counters I should be using to determine the problem with our file server. This server is not listed in my Servers thread, but here are the specs:Server 2003 Standard x64 SP2Intel Server board (likely 3210SHLC or other entry level Intel Server board)4GB DDR2 5332x Xeon quad-core E5320 1.86GHzhealthy RAID5 array on 3Ware 9550 8 portA main concern is that the OS volume is also in the RAID5 as well as the data volume. They are as follows:C: is a 50GB partition and has 6.34GB freeD: is a 1.7TB partition and has 287GB freeWhile under load (load meaning an active GhostCast Multicast session is in progress) doing anything on the server is very slow. Examples are: navigating the Start Menu, opening Windows, traversing folders, connecting to 3DM2 (using IE6) and even the GhostCase itself is slow. Network throughput out during the Cast sits around 1%, and average perhaps 100Mbps. The network is not the bottleneck of the system, as our WDS Server has no problem achieving respectable speeds, and of course the physical system seems to suffer. After load is released from the server, it returns to normal.I ran the following Counters and all results appear nominal:DiskCurrent Disk Queue Length: < 1 (I did not get to capture this value before the load was released)Avg. Read Queue Length: 0.229Avg Write Queue Length: 0.116% Disk Time: 20.104NetworkOutput Queue Length: 0CPUCPU Time: 21.870What other Counters should I try to help determine the problem? Link to comment Share on other sites More sharing options...
cluberti Posted January 6, 2010 Share Posted January 6, 2010 You sure you've disabled TCP Chimney? Link to comment Share on other sites More sharing options...
fizban2 Posted January 7, 2010 Share Posted January 7, 2010 check the network card for any NIC offloading features, if the NIC is offloading to the CPU task and it is slowing the PC you may have to turn them off Link to comment Share on other sites More sharing options...
Tripredacus Posted January 7, 2010 Author Share Posted January 7, 2010 I tried to both apply the hotfix and disabling the options manually. Both the same result. This occurs during the two scenarios:1. Running the hotfix, before the screen with the Finish button comes up2. Deselect/disable the offloading options in Device Properties, click OK and before Properties screen goes awayDRIVER_IRQL_NOT_LESS_OR_EQUALSTOP: 0xD1 (0x141, 0x2, 0x0, 0xFFFFFADF8EF179E2)e1e5132e.sys <--- this is the Intel Pro 1000 driverAddress FFFFFADF8EF179E2 base at FFFFFADF8EF0D000 Datestamp 45f08ad6I stopped the machine from doing a memory dump because there would be no feasible way for me to get the DMP file off the drive. Both times I restarted and booted back into Windows using Last Known Good Config. So it seems Server 2003 doesn't like turning off those features.I did notice in the Intel NIC properties, concerning TCP/IP offloading, that it should not be enabled if servicing DOS clients, which we use the DOS client of Symantec Ghost.Any other ideas? Link to comment Share on other sites More sharing options...
cluberti Posted January 7, 2010 Share Posted January 7, 2010 If disabling offloading causes a bugcheck, you've definitely got driver problems. Those are classic TCP chimney behaviors, honestly. Link to comment Share on other sites More sharing options...
Tripredacus Posted January 8, 2010 Author Share Posted January 8, 2010 I updated the driver for the NIC to the latest, which is still over a year old, and rebooted. Now I do not even have an Advanced tab, although the device still has the same name. How can I determine that these features are not being used?I won't be able to see if the issue is resolved as we won't be using Ghost likely until early next week. Hopefully this driver update was enough. Link to comment Share on other sites More sharing options...
cluberti Posted January 8, 2010 Share Posted January 8, 2010 If you follow the instructions in the KB article linked and do it manually, it won't matter what the driver was set to. Disabling the interfaces at the OS level will mean the driver will start up, query support, and won't enable those functionalities once loaded if the OS says "no". Link to comment Share on other sites More sharing options...
Tripredacus Posted January 11, 2010 Author Share Posted January 11, 2010 The driver update seems to have worked. We will likely end up doing some more testing tomorrow, as I only ghosted a netbook and its image is pretty small. We shall see how ghosting a server goes, but I think this issue is solved. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now