Computer crashes and restarts while starting Windows

[vfclists]

It seems some driver files have been corrupted on my system.

I was working normally and it just crashed without warning. I am

currently working from an alternate setup but I would like to revert

to crashed setup.

It will not boot safe mode as well, it appears to hang after mup.sys.

I have sptd.sys on my system as well but it doesn't seem to be the

problem. When I skip it it still crashes.

My last ntbtlog.txt goes back 31/10/2009 17:15. I have tried rebooting

a few times but it is not getting updated.

These are the settings from boot.ini

[boot loader]

timeout=30

default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS

[operating systems]

multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect /usepmtimer /noguiboot /bootlog

I even copied back the registries from the previous System Volume

Information but it is still crashing.

The last ntbtlog.txt displayed kmixer.sys several times at the end,

but replacing it hasn't stopped the problem

Is there a way to track which files are causing the crash, and restore

them from clean versions?

I tried to do a repair from the recovery console but can't remember

the Administrator password.

/vfclists

[Tripredacus]

Boot up with the F8. Then choose Disable automatic restart on system failure. Then choose XP and then tell us what the STOP error is.

[vfclists]

I am using a backup installation now, after I finish and secure it, I will get back to you.

Thanks.

Boot up with the F8. Then choose Disable automatic restart on system failure. Then choose XP and then tell us what the STOP error is.

[vfclists]

Boot up with the F8. Then choose Disable automatic restart on system failure. Then choose XP and then tell us what the STOP error is.

These is the result.

IRQL_NOT_LESS_OR_EQUAL

STOP:0x0000000A (0x00000000, 0x0000001C,0x00000001, 0x804FB03C)

[guoqiang]

It seems some driver files have been corrupted on my system.

...

These are the settings from boot.ini

[boot loader]

timeout=30

default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS

[operating systems]

multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect /usepmtimer /noguiboot /bootlog

...

The last ntbtlog.txt displayed kmixer.sys several times at the end,

but replacing it hasn't stopped the problem

...

go to Safe Mode (F8) and uninstall kmixer.sys and its related drivers (from its .inf), and then Normal Mode.

changed 'multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect /usepmtimer /noguiboot /bootlog'

to 'multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect'

[beats]

Stop error 0x804FB03C is pretty generic. It can mean: corrupt dll file(s), defunct memory and/or a faulty video card (driver).

Also, did you already try to reset the BIOS? And to boot the system with just one RAM module installed?