Jump to content
Strawberry Orange Banana Lime Leaf Slate Sky Blueberry Grape Watermelon Chocolate Marble
Strawberry Orange Banana Lime Leaf Slate Sky Blueberry Grape Watermelon Chocolate Marble

MSFN is made available via donations, subscriptions and advertising revenue. The use of ad-blocking software hurts the site. Please disable ad-blocking software or set an exception for MSFN. Alternatively, register and become a site sponsor/subscriber and ads will be disabled automatically. 


blue4603

7Customizer - a Windows 7 Customization and Deployment tool

Recommended Posts

I downloaded the RAR file again. Unzipped it to it's own folder. Double clicked on the 7Customizer application file. It does nothing and immediately brings up the "windows is searching for a solution to your problem" dialog box.

I'm an administrator on my PC and I also tried running as administrator...no luck.

I recently rebuilt my machine from scratch...there's no virus on my machine. Am I right in thinking that this program isn't installed, it's just run from that application file in the RAR file?

Share this post


Link to post
Share on other sites

I downloaded the RAR file again. Unzipped it to it's own folder. Double clicked on the 7Customizer application file. It does nothing and immediately brings up the "windows is searching for a solution to your problem" dialog box.

I'm an administrator on my PC and I also tried running as administrator...no luck.

I recently rebuilt my machine from scratch...there's no virus on my machine. Am I right in thinking that this program isn't installed, it's just run from that application file in the RAR file?

What?

7C is a single .exe file and a work folder, nothing else, ofcourse it just run from the application in the .rar file.

Have you had any other problems with the computer?, could be defect sector on the disk or ram (just long shots).

Share this post


Link to post
Share on other sites

@jtrue28

Do you mean you did not extract the files? and you ran 7Customizer directly from the rar?

If this is true then go read the visual guide.

Regards

Share this post


Link to post
Share on other sites

figured it out.

I was extracting the files on my own....dragging the 5 files to a folder that I created. This time I just hit the "Extract" button and it created it's own folders...where I now see the "Work" folder. That wasn't there before...that was probably what was causing the problem. The "application" file was looking for that "work" folder...and it didn't exist.

thanks guys!

Share this post


Link to post
Share on other sites

Goodevening Blue:)..

Im trying to create an iso using 7C but it keeps failing, i run 7C as admin, choose necessary exe's and dvdsource (e:\eng), choose ultimate 32bit, move to unattended tab. fill out everything and then apply and create iso.

The window is open for a second and then it says its done, log says its done to.

Doesnt matter if the iso label is Windows 7 AIO English or just English.

Share this post


Link to post
Share on other sites
Goodevening Blue:)..

Im trying to create an iso using 7C but it keeps failing, i run 7C as admin, choose necessary exe's and dvdsource (e:\eng), choose ultimate 32bit, move to unattended tab. fill out everything and then apply and create iso.

The window is open for a second and then it says its done, log says its done to.

Doesnt matter if the iso label is Windows 7 AIO English or just English.

you have to copy the Windows DVD to a folder on your hard drive. 7C needs to be able to write to those files, which cannot be done to a closed DVD.

I had the same problem last night before I realized I needed to copy the DVD to my hard drive.

Share this post


Link to post
Share on other sites
Goodevening Blue:)..

Im trying to create an iso using 7C but it keeps failing, i run 7C as admin, choose necessary exe's and dvdsource (e:\eng), choose ultimate 32bit, move to unattended tab. fill out everything and then apply and create iso.

The window is open for a second and then it says its done, log says its done to.

Doesnt matter if the iso label is Windows 7 AIO English or just English.

you have to copy the Windows DVD to a folder on your hard drive. 7C needs to be able to write to those files, which cannot be done to a closed DVD.

I had the same problem last night before I realized I needed to copy the DVD to my hard drive.

well duh ofcourse i know ive to copy the dvd to the hdd)

E:\ is my other partition

C:\ windows

D:\ dvd

E:\ other

Share this post


Link to post
Share on other sites
Goodevening Blue:)..

Im trying to create an iso using 7C but it keeps failing, i run 7C as admin, choose necessary exe's and dvdsource (e:\eng), choose ultimate 32bit, move to unattended tab. fill out everything and then apply and create iso.

The window is open for a second and then it says its done, log says its done to.

Doesnt matter if the iso label is Windows 7 AIO English or just English.

you have to copy the Windows DVD to a folder on your hard drive. 7C needs to be able to write to those files, which cannot be done to a closed DVD.

I had the same problem last night before I realized I needed to copy the DVD to my hard drive.

well duh ofcourse i know ive to copy the dvd to the hdd)

E:\ is my other partition

C:\ windows

D:\ dvd

E:\ other

whatever dude...just trying to help. touch off!

Share this post


Link to post
Share on other sites
Goodevening Blue:)..

Im trying to create an iso using 7C but it keeps failing, i run 7C as admin, choose necessary exe's and dvdsource (e:\eng), choose ultimate 32bit, move to unattended tab. fill out everything and then apply and create iso.

The window is open for a second and then it says its done, log says its done to.

Doesnt matter if the iso label is Windows 7 AIO English or just English.

you have to copy the Windows DVD to a folder on your hard drive. 7C needs to be able to write to those files, which cannot be done to a closed DVD.

I had the same problem last night before I realized I needed to copy the DVD to my hard drive.

well duh ofcourse i know ive to copy the dvd to the hdd)

E:\ is my other partition

C:\ windows

D:\ dvd

E:\ other

whatever dude...just trying to help. touch off!

I know, im sorry if it sounded wrong.

chill guys!

@grabben

why dont you post just your log-file for blue ? ;D

Yea i can do that, if i find it again.. *checking..*

Well its not on my computer *running to laptop*

Edit: here it is.

=== 7Customizer Started===
7Customizer verion: 0.4.0a
7Customizer path: E:\7Customizer_0.4.0a\7Customizer_0.4.0a\7Customizer.exe
Current directory: E:\7Customizer_0.4.0a\7Customizer_0.4.0a
OS: Microsoft Windows NT 6.1.7600.0
OS architecture: x86
Work folder found: True
Mount folder found: True
Extract utility found: True
Configuration file found: True
bootorder.txt file found: True
Boot sector file found: True
Elevated: True
Getting drive info
Free space: 56,6203842163086 GB
Getting drive info: Done
Saved Imagex path: E:\Program Files\Windows AIK\Tools\x86\imagex.exe
Saved DISM path: E:\Program Files\Windows AIK\Tools\x86\Servicing\Dism.exe
Saved odcdimg path: E:\Program Files\Windows AIK\Tools\x86\oscdimg.exe
ImageX Path Selected
ImageX Path: C:\Program Files\Windows AIK\Tools\x86\imagex.exe
Windows source path selected
Sources folder found
install.wim found
install.wim size: 3500 MB
Added: "C:\Program Files\Windows AIK\Tools\x86\imagex.exe">work\testimagex.txt
Testing imagex
Imagex result begin:
Imagex result file created.

ImageX Tool for Windows
Copyright (C) Microsoft Corp. All rights reserved.
Version: 6.1.7600.16385

Imagex result end.
Added: "E:\Program Files\Windows AIK\Tools\x86\Servicing\Dism.exe">work\testdism.txt
Testing dism
dism result begin:





dism result end.
added: "C:\Program Files\Windows AIK\Tools\x86\imagex.exe" /XML /info "E:\Eng\sources\install.wim">work\imagesinfo.xml
Starting imagex
Imagex created imagesinfo.xml Successfully
Reading images information from imagesinfo.xml
First 5 lines of imagesinfo.xml
<WIM>
<TOTALBYTES>3670638840</TOTALBYTES>
<IMAGE INDEX="1">
<DIRCOUNT>9044</DIRCOUNT>
<FILECOUNT>45608</FILECOUNT>
Number of Available Images: 11
Reading image indiceis
Reading image displaynames
Reading image names
Reading image architectures
Reading image edition IDs
Available Images: Begin
Windows 7 Starter
Windows 7 Home Basic
Windows 7 Home Premium
Windows 7 Professional
Windows 7 Ultimate
Windows 7 Enterprise
Windows 7 Home Basic
Windows 7 Home Premium
Windows 7 Professional
Windows 7 Ultimate
Windows 7 Enterprise
Available Images: End
Reading info finished
Start button pressed
added: "C:\Program Files\Windows AIK\Tools\x86\imagex.exe" /XML /info "E:\Eng\sources\install.wim" 5 >work\imagesinfo.xml
Starting ImageX
Imagex created imagesinfo.xml Successfully
Reading selected image information from imagesinfo.xml
First 5 lines of imagesinfo.xml
<IMAGE INDEX="5">
<DIRCOUNT>9384</DIRCOUNT>
<FILECOUNT>47447</FILECOUNT>
<TOTALBYTES>8471060645</TOTALBYTES>
<CREATIONTIME>
Installed Language: Begin
en-US
Installed Language: End
Image default language: en-US
Image Architecture: x86
Image Edition:Ultimate
Selected Image name: Windows 7 ULTIMATE
Finished Reading selected image information
After apply ISO file selected
ISO file: E:\Windows 7 AIO English.iso
ISO label: Windows 7 AIO English
Added: "E:\Program Files\Windows AIK\Tools\x86\oscdimg.exe" -u2 -m -o -lWindows 7 AIO English -b"work\etfsboot.com" -yo"work\bootorder.txt" "E:\Eng" "E:\Windows 7 AIO English.iso"
Apply button pressed
Debug Mode: False
Creating Autounattend.xml
Finished Autounattend.xml
Prepearing instructions to execute
Added: "E:\Program Files\Windows AIK\Tools\x86\Servicing\Dism.exe" /mount-wim /wimfile:"E:\Eng\sources\install.wim" /index:5 /mountdir:"work\mount"
Added: "E:\Program Files\Windows AIK\Tools\x86\Servicing\Dism.exe" /unmount-wim /mountdir:"work\mount" /commit
Finished Execution
Done. Exiting 7Customizer

Edited by grabben

Share this post


Link to post
Share on other sites

@grabben @jtrue28

Relax guys. Please respect each other. We are here to discuss not to fight.

@grabben

From your log, it seems that the dism test failed. Maybe you could reinstall WAIK.

Regards

Share this post


Link to post
Share on other sites
@grabben @jtrue28

Relax guys. Please respect each other. We are here to discuss not to fight.

@grabben

From your log, it seems that the dism test failed. Maybe you could reinstall WAIK.

Regards

Hm believe i reinstalled and tried again after and got the same results, but ill try one more freakin time:p

Share this post


Link to post
Share on other sites

Sorry Blue4603..

Same problem again, select english dvd, ultimate 32bite, choose unattended only and press apply (also create iso after applying changes)

But i noticed something..

Added: "E:\Program Files\Windows AIK\Tools\x86\oscdimg.exe" -u2 -m -o -lWindows 7 AIO English -b"work\etfsboot.com" -yo"work\bootorder.txt"

Should it be "-yowork.." ?

=== 7Customizer Started===
7Customizer verion: 0.4.0a
7Customizer path: E:\7Customizer_0.4.0a\7Customizer.exe
Current directory: E:\7Customizer_0.4.0a
OS: Microsoft Windows NT 6.1.7600.0
OS architecture: x86
Work folder found: True
Mount folder found: True
Extract utility found: True
Configuration file found: True
bootorder.txt file found: True
Boot sector file found: True
Elevated: True
Getting drive info
Free space: 56,1815719604492 GB
Getting drive info: Done
Saved Imagex path: C:\Program Files\Windows AIK\Tools\x86\imagex.exe
Saved DISM path: C:\Program Files\Windows AIK\Tools\x86\Servicing\Dism.exe
Saved odcdimg path: C:\Program Files\Windows AIK\Tools\x86\oscdimg.exe
Windows source path selected
Sources folder found
install.wim found
install.wim size: 3500 MB
Added: "C:\Program Files\Windows AIK\Tools\x86\imagex.exe">work\testimagex.txt
Testing imagex
Imagex result begin:
Imagex result file created.

ImageX Tool for Windows
Copyright (C) Microsoft Corp. All rights reserved.
Version: 6.1.7600.16385

Imagex result end.
Added: "C:\Program Files\Windows AIK\Tools\x86\Servicing\Dism.exe">work\testdism.txt
Testing dism
dism result begin:

Deployment Image Servicing and Management tool
Version: 6.1.7600.16385


dism result end.
added: "C:\Program Files\Windows AIK\Tools\x86\imagex.exe" /XML /info "E:\Eng\sources\install.wim">work\imagesinfo.xml
Starting imagex
Imagex created imagesinfo.xml Successfully
Reading images information from imagesinfo.xml
First 5 lines of imagesinfo.xml
<WIM>
<TOTALBYTES>3670638840</TOTALBYTES>
<IMAGE INDEX="1">
<DIRCOUNT>9044</DIRCOUNT>
<FILECOUNT>45608</FILECOUNT>
Number of Available Images: 11
Reading image indiceis
Reading image displaynames
Reading image names
Reading image architectures
Reading image edition IDs
Available Images: Begin
Windows 7 Starter
Windows 7 Home Basic
Windows 7 Home Premium
Windows 7 Professional
Windows 7 Ultimate
Windows 7 Enterprise
Windows 7 Home Basic
Windows 7 Home Premium
Windows 7 Professional
Windows 7 Ultimate
Windows 7 Enterprise
Available Images: End
Reading info finished
Start button pressed
added: "C:\Program Files\Windows AIK\Tools\x86\imagex.exe" /XML /info "E:\Eng\sources\install.wim" 5 >work\imagesinfo.xml
Starting ImageX
Imagex created imagesinfo.xml Successfully
Reading selected image information from imagesinfo.xml
First 5 lines of imagesinfo.xml
<IMAGE INDEX="5">
<DIRCOUNT>9384</DIRCOUNT>
<FILECOUNT>47447</FILECOUNT>
<TOTALBYTES>8471060645</TOTALBYTES>
<CREATIONTIME>
Installed Language: Begin
en-US
Installed Language: End
Image default language: en-US
Image Architecture: x86
Image Edition:Ultimate
Selected Image name: Windows 7 ULTIMATE
Finished Reading selected image information
After apply ISO file selected
ISO file: E:\Windows 7 AIO English.iso
ISO label: Windows 7 AIO English
Added: "C:\Program Files\Windows AIK\Tools\x86\oscdimg.exe" -u2 -m -o -lWindows 7 AIO English -b"work\etfsboot.com" -yo"work\bootorder.txt" "E:\Eng" "E:\Windows 7 AIO English.iso"
Apply button pressed
Debug Mode: True
Creating Autounattend.xml
Finished Autounattend.xml
Prepearing instructions to execute
Added: "C:\Program Files\Windows AIK\Tools\x86\Servicing\Dism.exe" /mount-wim /wimfile:"E:\Eng\sources\install.wim" /index:5 /mountdir:"work\mount"
Added: "C:\Program Files\Windows AIK\Tools\x86\Servicing\Dism.exe" /unmount-wim /mountdir:"work\mount" /commit
Finished Execution
Done. Exiting 7Customizer

Share this post


Link to post
Share on other sites

@grabben

Same problem again, select english dvd, ultimate 32bite, choose unattended only and press apply (also create iso after applying changes)

Hmmmm, strange i will try to find what is wrong and report back to you.

Added: "E:\Program Files\Windows AIK\Tools\x86\oscdimg.exe" -u2 -m -o -lWindows 7 AIO English -b"work\etfsboot.com" -yo"work\bootorder.txt"

Should it be "-yowork.." ?

Nope.

Thanks for your feedback.

Regards

Share this post


Link to post
Share on other sites
@grabben
Same problem again, select english dvd, ultimate 32bite, choose unattended only and press apply (also create iso after applying changes)

Hmmmm, strange i will try to find what is wrong and report back to you.

Added: "E:\Program Files\Windows AIK\Tools\x86\oscdimg.exe" -u2 -m -o -lWindows 7 AIO English -b"work\etfsboot.com" -yo"work\bootorder.txt"

Should it be "-yowork.." ?

Nope.

Thanks for your feedback.

Regards

Thankyou Blue4603 :)

Hope it'll work out soon.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...