Jump to content

WinPE x64 nic issues - Broadcom NetXtreme I & II


Jazkal

Recommended Posts

So I'm building WinPE from the newest WAIK. Has to be x64 version, because it has to install Windows 2008 R2 via network (which is x64 only, no x86 version to call setup.exe with).

I have a number of boxes that I can not get the Nics to grab a DHCP IP at all.

Dell Poweredge R710 Nics:
PCI\VEN_14E4&DEV_1639&SUBSYS_02351028&REV_20\FEAB2B0100 : Broadcom BCM5709C NetXtreme II Monolithic Driver
PCI\VEN_14E4&DEV_1639&SUBSYS_02351028&REV_20\FEAB2B0301 : Broadcom BCM5709C NetXtreme II Monolithic Driver #2

Dell Poweredge R900 Nics:
PCI\VEN_14E4&DEV_164C&SUBSYS_01F01028&REV_12\7&36AE1548&0&0000180018: Broadcom BCM5708C NetXtreme II GigE
PCI\VEN_14E4&DEV_164C&SUBSYS_01F01028&REV_12\7&3D48B3B&0&0000280018: Broadcom BCM5708C NetXtreme II GigE #2
PCI\VEN_14E4&DEV_164C&SUBSYS_01F01028&REV_12\7&57BC5F4&0&0000100018: Broadcom BCM5708C NetXtreme II GigE #3
PCI\VEN_14E4&DEV_164C&SUBSYS_01F01028&REV_12\7&F552F72&0&0000200018: Broadcom BCM5708C NetXtreme II GigE #4

HP DL585 G2 Nics:
PCI\VEN_14E4&DEV_164A&SUBSYS_1709103C&REV_02\4&9C889E9&0&0880: Broadcom BCM5706C NetXtreme II GigE
PCI\VEN_14E4&DEV_164A&SUBSYS_1709103C&REV_02\4&9C889E9&0&1080: Broadcom BCM5706C NetXtreme II GigE #2

Tyan S3992 Nics:
PCI\VEN_14E4&DEV_166A&SUBSYS_166A14E4&REV_10\4&2DC1BBBE&0&2038: Broadcom NetXtreme Gigabit Ethernet
PCI\VEN_14E4&DEV_166A&SUBSYS_166A14E4&REV_10\4&2DC1BBBE&0&2138: Broadcom NetXtreme Gigabit Ethernet #2

I have tried all the latest drivers from Broadcom, HP, and Dell.

But the part that really makes me think, is that these:

Dell Poweredge 2950 Mk II Nics:
PCI\VEN_14E4&DEV_164C&SUBSYS_01B21028&REV_11\5&2EADD4B0&0&0000E0: Broadcom BCM5708C NetXtreme II GigE
PCI\VEN_14E4&DEV_164C&SUBSYS_01B21028&REV_11\7&1DF4CEC7&0&0000000010: Broadcom BCM5708C NetXtreme II GigE

Dell Poweredge 2950 Mk III Nics:
PCI\VEN_14E4&DEV_164C&SUBSYS_01B21028&REV_12\5&43097C6&0&0000E0: Broadcom BCM5708C NetXtreme II GigE
PCI\VEN_14E4&DEV_164C&SUBSYS_01B21028&REV_12\7&2A8A8A3B&0&0000000010: Broadcom BCM5708C NetXtreme II GigE #2

These Broadcoms work fine. Which have the same Ven and Dev ID's as the R900 Nics.

Anyone have any ideas?

Link to comment
Share on other sites


Broadcom is infamous for using emulated NIC firmware, which has caused many a problem. Where are you getting these Hardware IDs? From Windows? Try running PCISCAN from a DOS boot to see if they turn out different. I've had a heck of a time with some Broadcom (and nVidia) emulated NICs and had to use Ghost instead. Not saying this is your answer but anytime I come across a Broadcom now I just want to go home sick. :}

Link to comment
Share on other sites

Not sure about the HWIDs but had a similar issue on a new IBM server recently, the monolithic drivers (their RIS drivers) from the Broadcom website worked for it, after rebuilding the WinPE from scratch, couldn't just load the drivers into my existing PE boot wim. But I don't recall seeing that they had these in a 64 bit version, didn't look into the inf file though to see if it did both.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...