Jump to content

Revolutions Pack 9.7


Recommended Posts


Report based on installation and usage of 9.0.3:

• Scrollbars behave erratically: jump down when clicked, jump at the bottom (and the file scrolls with them!) when thumb dragged close to the top (both happen in relatively large files)

• Installer and RPConfig dialog start between screens in a multi-monitor environment and don't remember last position; try to display them either on primary monitor or on the monitor with the active window and save position on close

• 32-bit support & icons were left out at install time, yet the RPConfig dialog started off with 32-bit icon quality selected

• the groupbox showing the selected theme needs to be about 4-6px higher as it's currently cut at the top and bottom... or is this a desired behavior (I see the system icon set behaves identically)?

Use Clear Type gets marked everytime RPConfig is started (doesn't remember being disabled)

I believe the installer should automatically move (or at least, copy) all the themes found in Resources - regardless if they're official or not - since most likely one of them is active and should be automatically reapplied from the new location.

So far no clash with KernelEx 4.0 but there's still a long way to go. Good job so far! :thumbup

P.S. Please fix the scrollbar behavior, it's killing me. Used to work fine in 8.3.6... :(

Link to comment
Share on other sites

THANK YOU ( Great Work ) Tihiy .

Yes [Drugwash] - (32-bit) Icon setting is an INDEPENDENT Windows registry setting ,

that might already be set to 32-bit icon color before installation.

-------------------------------------------------------------------

REGEDIT4

[HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics]

"Shell Icon BPP"="32"

"Shell Icon Size"="32"

"Shell Small Icon Size"="32"

"IconBackground"="8"

-------------------------------------------------------------------

These are my personal preference settings .

"Shell Small Icon Size"="32" : is not a sticky setting .

If Windows theme is changed , it is erased from the registry

and all the " small icons" fall to a smaller size - like 16 pixels .

I keep the "small icons" regfix on my STARTmenu

so that I can merge it to set my small icons back to 32 pixel size.

The installer might be sensing the "Shell Icon BPP" registry setting.

Edited by Win98SEonSteroids
Link to comment
Share on other sites

Tihiy , . . . In RP8.dll ( OriginalFilename rp9.dll )

version 9.0.2 or now version 9.0.3 -- the call to UBERHACK.EXE

which returns the results of " resource salvation " patch

and the results of the " kernel32 patch "

Can You allow a User setting to ' TURN OFF ' the " kernel32 patch failed " - on BOOTup ?

I managed to modify RPSetup.exe to allow install of RP9

over top of uberskin-v8.3.8.exe AND RP4_b2700.zip .

-----------------------------------------------------------------

I had to re-install Win98SE " clean "

after a complete crash of Win98SE ( back in September 2008 ) .

I needed the features of RP4 that I didn't have in Win98SE " clean " .

-----------------------------------------------------------------

Uberskin v8.3.8 worked GREAT .

My only ( important ) program that would crash on exit -- and corrupt it's database files

was ' CA- Simply Money ' .

With RP9 & Uberskin , ' CA-Simply Money '

:) opens , closes , and saves its' database perfectly !

I wish to keep using ( and testing ) RP9 & Uberskin .

Thank You if there is a way to DISABLE the RP9 " kernel32 patch failed " popup .

Edited by Win98SEonSteroids
Link to comment
Share on other sites

Which files are critical to making GDI Salvation work? When I do a minimal install, I get uberhack.exe, shl8.dll, rp8.dll and ktm8.dll.

I know ktm8.dll is the task manager replacement and can be deleted. rpclrtyp.dll is obviously for Clear Type; what is comctlv8.dll for and why doesn't a minimal install include it? uberskin.dll is presumably the awesome-sauce skinning engine.

Anyhow, I'm mainly just looking for reassurance that any installation choice will include GDI Salvation.

Queue

Link to comment
Share on other sites

Test report on 9.0.3

- no more "kernel32 patch failure" on startup of Chinese Windows

- new kenerl task manager (ctrl-alt-del) now works in Chinese Windows

These are good news for DBCS Windows users! :thumbup

New issue:

SimpTerm (sptnet32.exe, a terminal program) crashed the whole system in a few seconds for "kernel32 performed illegal operation". The system froze and could only be hard reset, so I cannot provide more detailed information. No such problem in the first version of RP9 and in Uberskin

It happened even when GDI resource salvation was disabled

Now I use PuTTY instead for terminal purpose and do not have problem so far

Link to comment
Share on other sites

I have encountered a small issue while running RP9 on Windows ME. It seems that the clock in the system tray is not skinned regardless of what theme I choose. Also it seems that not all icons have been changed when I selected a theme.

The test platform is Windows Me with Internet Explorer 6 SP1 running inside Vmware Player. I have installed RP9Updates.exe before installing RP9.exe and deleted ShellIconCache just to make sure.

I hope this helps :)

WindowsMe-2009-03-17-01-17-05-1.png

Edited by amocanu
Link to comment
Share on other sites

...it seems that not all icons have been changed when I selected a theme...

Had same problem on Win98SE. Had KernelEx 4.0RC1 installed first. Then installed RP9. After uninstall RP and KernelEx, then reinstall RP9, was fixed. Then reinstall KernelEx, stayed fixed :thumbup

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...