jaclaz Posted January 13, 2010 Share Posted January 13, 2010 (edited) Try typing "pippo" (without double quotes).What happens?Check your ECHO settings (you do NOT want ECHO ON).jaclaz Edited January 13, 2010 by jaclaz Link to comment Share on other sites More sharing options...
PuppinoCbr Posted January 13, 2010 Share Posted January 13, 2010 (edited) Try typing "pippo" (without double quotes).What happens?Check your ECHO settings (you do NOT want ECHO ON).jaclazWhen i write PIPPO (and ENTER), the cursor comes back on first P .. it's normal or not? ("Ctrl+Z" that prodecus an arrow, is it normal without HD attached?)(ECHO is OFF)Thanks again Edited January 13, 2010 by PuppinoCbr Link to comment Share on other sites More sharing options...
jaclaz Posted January 13, 2010 Share Posted January 13, 2010 When i write PIPPO (and ENTER), the cursor comes back on first P .. it's normal or not? ("Ctrl+Z" that prodecus an arrow, is it normal without HD attached?)(ECHO is OFF)Try with echo ON, now.And yes an arrow is "normal".jaclaz Link to comment Share on other sites More sharing options...
PuppinoCbr Posted January 13, 2010 Share Posted January 13, 2010 If Echo is on, when i put a letter, without press ENTER, it just shows another same letter..Ok.. i progress on HD (after restoring echo OFF)..Thanks Link to comment Share on other sites More sharing options...
pedrojpz Posted January 13, 2010 Share Posted January 13, 2010 Another Successfull Fix!!!!!!!!!!Thank you very much!!!!!!!I'm backing up my most important files right now!Model: ST31000333ASFW: SD35The fix worked at first try with no errors, I have all my data OK, two NTFS partitions. Did not use the G-list and 0LBA, only the BSY fix.Used CA-42 cable (not Nokia original but a "clonic").Perhaps we should follow two simple rules (I will do):1. Don't go and buy the newest technology in the store, i.e., the latest HDD model with the highest capacity2. Backup your files!The final hyperterminal lines (after CONTROL+Z):ASCII Diag modeF3 T>m0,2,2,,,,,22Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 14, Max Certify Rewrite Retries = 00C8User Partition Format 3% complete, Zone 00, Pass 00, LBA 00004AA5, ErrCode 00000080, Elapsed Time 0 mins 30 secsUser Partition Format Successful - Elapsed Time 0 mins 30 secsZone re-format was skipped.F3 T> Link to comment Share on other sites More sharing options...
RastaHuis Posted January 14, 2010 Share Posted January 14, 2010 (edited) and i'm successfull too!!!thnx for this fix, it was a bit fiddley.i also used a nokia ca-42 cable to unbrick a friend's 500gb hp/seagate drive, and did a fw update as soon as i was done. Edited January 14, 2010 by RastaHuis Link to comment Share on other sites More sharing options...
PuppinoCbr Posted January 14, 2010 Share Posted January 14, 2010 (edited) :thumbup THANKS TO ALL for your help!!!Special thanks to jaclaz!! ALL PERFECT!! THANKS!! ALL RECOVERED!! :hello: :hello: Edited January 14, 2010 by PuppinoCbr Link to comment Share on other sites More sharing options...
jaclaz Posted January 14, 2010 Share Posted January 14, 2010 Good. Another set of happy bunnies :http://www.msfn.org/board/cant-access-repa...16-page-10.htmljaclaz Link to comment Share on other sites More sharing options...
pedrojpz Posted January 14, 2010 Share Posted January 14, 2010 So, now, I have just applied the solution and got my data back, the question is...Should I update firmware? What version?In Seagate website, the available version is SD1B, but does this firmware version fix effectively the problem or will my HD die again?My Hdd is ST31000333AS, fw SD35 Link to comment Share on other sites More sharing options...
Magregus Posted January 14, 2010 Share Posted January 14, 2010 Hi, My HD is not recognized by BIOS. It spins up and down constantly. Just managed to connect to the TTL interface and use Hyperterminal to read the messages from my HD and this is what it shows:Thanks in advanceWhat model is the HDD? Link to comment Share on other sites More sharing options...
aha Posted January 15, 2010 Share Posted January 15, 2010 Hi, I am new to your forum this place is great. I just wanted to ask a silly question cuz I am a noob, can I use SMPS for the power to HDD in place of some kind of external power supply or battery ? Please somebody answer. I am going in to troubleshoot the BSY error. Thanks for your time. Link to comment Share on other sites More sharing options...
Magregus Posted January 15, 2010 Share Posted January 15, 2010 Got a ST3500320AS HDD that seems to have BSY error. I've made a RS232 cable and it tests okay, also tests on another couple of drives but when I connect it to the 3500320AS I just get a character on the terminal and nothing else Control-Z doesnt work. Only thing I have not tried is using a proper SATA power cable not a 4-pin molex one on this drive. Anyone who done a 3500320AS can you confirm if you need a proper SATA power? Link to comment Share on other sites More sharing options...
pedrojpz Posted January 15, 2010 Share Posted January 15, 2010 Hi, My HD is not recognized by BIOS. It spins up and down constantly. Just managed to connect to the TTL interface and use Hyperterminal to read the messages from my HD and this is what it shows:Thanks in advanceWhat model is the HDD?Please read my older posts if you want to know about my case. My HDD is ST31000333AS, FW SD35. I already fixed it. Link to comment Share on other sites More sharing options...
underwurlde Posted January 15, 2010 Share Posted January 15, 2010 (edited) Re: Powering the HDD questions.For this to work, the HDD should be powered up and the best way to do this is using the standard PC's SATA power supply cable. Using an external single supply rail power supply didn't work for me.But why go to the lengths of using a different power supply anyway? There is one for free sat inside the PC all ready to be used!So, with PC on, connect power to the RS232 electronics and then connect RS232 interface to COM1 (or USB port), connect RS232 to HDD - INCLUDING the gnd connection, i.e. 3 wires. Connect PC SATA power to bricked HDD - it should spin up. Set up HyperTerminal, turn Caps Lock ON and press and hold CTRL key down then hit the Z key. Now turn Caps Lock OFF before entering any commands. If all is working you may (or may not) get a message back from the HDD (I get the message RequestResumeSaveSmartFrame appear in the HyperTerminal window), but you should at least see the command prompt characters appear, i.e. see F3 T>. Now enter your command and WAIT!!GL,Andy Edited January 15, 2010 by underwurlde Link to comment Share on other sites More sharing options...
jaclaz Posted January 15, 2010 Share Posted January 15, 2010 So, with PC on, connect power to the RS232 electronics and then connect RS232 interface to COM1 (or USB port), connect RS232 to HDD - INCLUDING the gnd connection, i.e. 3 wires.Please note how we are talking NOT about a RS-232 interface but about a TTL one.I.E. one of these:COMn->RS-232toTTL->Hard diskUSB->USBtoRS-232->RS-232toTTL->Hard diskUSB->USBtoTTL->Hard diskConnecting a RS-232 to the the hard disk may fry it for good. jaclaz Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now