Jump to content

Not booting with winsetupfromusb


Recommended Posts

i used winsetupfromusb and transferred the xp source i tried to boot from my 32GB USB it is not booting when i formatted with hp tool and i made it win98 bootable it is working

what i want to do with that

and i have one more problem with that when i tried to make partitions in that Pen drive only primary is get creating when i tried to make the free space to extended partition the partition table is getting damaged and after a lot of work i got that back what is the mistake in partitioning

is it possible to transfer the iso image to usb by using dd.exe

want more help on dd.exe i am not understanding about that

Help

Thanx in advance

Edited by kmaheshkumar
Link to comment
Share on other sites


Which OS are you using?

If NT/2K/XP/2003, under these systems only ONE (the Primary Active) partition is mountable IF the device is seen as "Removable" (like practically all sticks are).

You have three choices:

1) find the appropriate manufacturer's tool and "flip" the Removable bit so that the stick is seen as Fixed instead of removable

2) install and use a filter driver in your OS

3) forget about multiple partitions accessible under NT/2K/XP/2003 on Removable device and live with just one partition (this is a limit "by design" of the said OSes)

Let's for the moment forget about winsetupfromusb, and partition and make the stick booting.

Once you have it working, you can try again the program.

Which filesystem do you want to use?

FAT16 is inappropriate for a 32 Gb partition.

FAT32 is better, but the NT bootsector has sometimes problems with it.

NTFS would be the better choice, BUT you risk to wear prematurely the stick.

Read this:

http://www.msfn.org/board/index.php?showto...119963&st=0

First thing to try is fuwi's batch:

http://www.911cd.net/forums//index.php?sho...c=21702&hl=

You CANNOT dd.exe a .iso to a USB stick (i.e. you can but you will get an unbootable/unreadable stick).

:iso files use CDFS filesystem, USB sticks use "normal" HD filesystems.

The only exception are particular sticks that have also a CDROM "part", but then again dd.exe won't work at all on them:

http://www.msfn.org/board/index.php?showtopic=125138

http://www.msfn.org/board/index.php?showtopic=121502

and you will need anyway the particular tool for the specific chip on the stick.

jaclaz

Edited by jaclaz
Link to comment
Share on other sites

thanx jaclaz

i cant get the filter driver i am using dummy.sys for that, is there any other flip method

and i thinking that already my pen drive is booting with win98 so i want to make some config.sys for booting grub.exe to load the windows setup and i want to make entry in that config.sys for hard booting after first restart of windows installation is it possible

Link to comment
Share on other sites

Try using Chipgenius:

http://209.85.129.132/search?q=cache:RiTgg...3D4661%26st%3D0

using google cache untill boot-land is back online:

http://www.boot-land.net/forums/index.php?...c=4661&st=0

and see if you can find the Manufacturer's tool to "flip the bit" permanently.

Try using the Hitachi Filter Driver cfadisk.sys:

http://www.911cd.net/forums//index.php?showtopic=17701

Booting Win9x->grub.exe->whatever info can be found here (ALREADY given link):

http://www.msfn.org/board/USB-Booting-issu....html&st=47

jaclaz

Link to comment
Share on other sites

thanx for the help

i got one more idea to make this by configuring config.sys

i want to make config.sys with menu options for 1 option i want to start install the xp from usb and fro 2 option i want to run the bootloader form hd1 and for some other option i want to run the memdisk tool for these i can run the grub also so please help for configuring those things that and i am thinking to build a cmd file for this

and i got some thing while searching

i got 3 .inf files and a regfile

can any one explain the regfile in this file

and some thing is there in usbboot.reg file with other language i want it in english if any one knows that pls help

any help is much appreciated

thanx in advance

FlashBootXP_ver1.rar

Edited by kmaheshkumar
Link to comment
Share on other sites

kmaheshkumar,

look, I am willing to help you, but if you do not explain what you are trying to do in a way that I can understand it, it won't be possible.

You need to tell me what your final goal is, and then follow the advise I may (hopefully) be able to give you.

i got 3 .inf files and a regfile

Where?

jaclaz

Link to comment
Share on other sites

the inf files in the attachment itself

i want to my my pen drives bootable and to install operating systems from them i have 3 pendrives with me

one is 4GB, 16GB, 32GB so i want them to make for my work and to get the knowledge about booting and installing with pendrives i purchased 16, 32 GB pen drives for this purpose only

and i want to make my pendrives bootable and ready to install the operating systems and i dont want to waste my time using those big time takers i want to use those to make the boot files and i want to copy my source files to pen drive and i am trying to install the operating systems from the second partition of my usb drive to save the setup source without effecting with virus

Link to comment
Share on other sites

the inf files in the attachment itself

I'll try again:

Where did you get them?

i want to my my pen drives bootable and to install operating systems from them i have 3 pendrives with me

one is 4GB, 16GB, 32GB so i want them to make for my work and to get the knowledge about booting and installing with pendrives i purchased 16, 32 GB pen drives for this purpose only

And for the third time, try using fuwi's batch on them, it is currently the easiest way to make a pendrive bootable. (one partition only, no matter if "Fixed" or "Removable").

and i want to make my pendrives bootable and ready to install the operating systems and i dont want to waste my time using those big time takers ....

Here we have some problems :ph34r: , actually the ESSENCE of a forum like this is to "waste" :w00t: time learning, there is a ready available alternative, that involves the exchange of money to rent an expert to do the work for you and save your time.

.... i want to use those to make the boot files and i want to copy my source files to pen drive and i am trying to install the operating systems from the second partition of my usb drive to save the setup source without effecting with virus

And here we have another problem. :ph34r:

As ALREADY said, to have more than one partition available on a USB stick under a NT based OS, the stick needs to be seen by the NT based OS as "Fixed".

You were given the links to the two known methods to make this happen.

There is NO actual need, and definitely NOT "to save the setup source without effecting with virus", to use a partitioned stick, though it is a "better" philosophical approach.

Once you have with either of the two methods, made the stick seen as "Fixed", you can use Disk Management to partition it and format it's partitions.

I will repeat myself once again.

The "best" way is, provided that you find the right tool, is to "flip the bit" and have a USB stick seen as "Fixed".

Otherwise use either dummydisk.sys or cfadisk.sys, just recently cdob posted some new, interesting info:

http://www.msfn.org/board/index.php?showtopic=126868&hl=

http://www.msfn.org/board/index.php?showto...26868&st=12

Now, let's start again from scratch.

Choose one and just one of the three sticks you have.

Run Chipgenius on it.

Post the info Chipgenius gives.

List ALL the Operating systems you would like to install from the stick and utilities you want to run.

jaclaz

Link to comment
Share on other sites

Device Name: +[J:]+USB Mass Storage Device(usb2.0 flash disk USB Device) 32GB

PnP Device ID: VID = 1221 PID = 3234

Serial Number: 1000000000000698

Revision: 2.20

Device Type: Standard USB device - USB2.0 High-Speed

Chip Vendor: (No match record)

Chip Part-Number: (No match record)

Product Vendor: usb2.0

Product Model: flash disk

Tools on Web: (N/A)

Device Name: +[J:]+USB Mass Storage Device(USB2.0 Flsah Disk USB Device) 16GB

PnP Device ID: VID = 1221 PID = 3234

Serial Number: 1100000000001363

Revision: 2.20

Device Type: Standard USB device - USB2.0 High-Speed

Chip Vendor: (No match record)

Chip Part-Number: (No match record)

Product Vendor: USB2.0

Product Model: Flsah Disk

Tools on Web: (N/A)

Device Name: +[i:]+USB Mass Storage Device(Kingston DataTraveler 2.0 USB Device) 4GB

PnP Device ID: VID = 0951 PID = 1603

Serial Number: 8998011620080115142554FC

Revision: 1.00

Device Type: Standard USB device - USB2.0 High-Speed

Chip Vendor: skymedi

Chip Part-Number: SK6281/SK6211

Product Vendor: Kingston

Product Model: DataTravelerDT1

Tools on Web: http://bbs.mydigit.cn/read.php?tid=4345

i want install all the client operating systems with my 32 or 16 GB pendrive like 2000 Prof, XPSP2, VISTA ULTIMATE

some other details for attachment is Here

yesterday i used cfadisk sucessfully for first time i got that from the above site flash.ru but my 32,16 GB pendrives are not getting formatted with NTFS file system

Link to comment
Share on other sites

The tool for Vid 1221 Pid 3234 is already on the site you mentioned:

http://flashboot.ru/index.php?name=iflash

http://flashboot.ru/index.php?name=Files&a...p=cat&id=14

The tool for Vid 0951 Pid 1603 is already on the site you mentioned:

http://flashboot.ru/index.php?name=iflash&pagenum=2

http://forum.flashboot.ru/index.php?name=F...p=cat&id=12

yesterday i used cfadisk sucessfully for first time i got that from the above site flash.ru but my 32,16 GB pendrives are not getting formatted with NTFS file system

sure, but unless you DETAIL what you attempted to do I have NO way to try and help you. :(

Some questions:

Are you sure the stick is seen as "Fixed"? (i.e. that cfadisk is working properly?)

Did you enable the "optimize for performance":

http://blogs.msdn.com/oldnewthing/archive/.../05/108205.aspx

:unsure:

Which program Utility did you try using on it?

Have you tried to format as FAT?

Have you tried then using CONVERT.EXE?

jaclaz

Link to comment
Share on other sites

when i started the tool of 4GB accidently space bar has been pressed and it is giving different id i am posting it now

Device Name: +[H:]+USB Mass Storage Device(SKYMEDI USB Drive USB Device)

PnP Device ID: VID = 1516 PID = 8628

Serial Number: 03

Revision: 1.0

Device Type: Standard USB device - USB2.0 High-Speed

Chip Vendor: skymedi

Chip Part-Number: SK6201/6281

Product Vendor: (N/A)

Product Model: (N/A)

Tools on Web: http://bbs.mydigit.cn/read.php?tid=4345

and it is giving only 2GB

like that only 32GB also happened but mistakenly choosen different model no please help for this i want my pendrives back

this is the new 32GB

Device Name: +[H:]+USB Mass Storage Device(USB2.0 Flash Disk USB Device)

PnP Device ID: VID = 1221 PID = 3234

Serial Number: 10000000000002C2

Revision: 2.20

Device Type: Standard USB device - USB2.0 High-Speed

Chip Vendor: (No match record)

Chip Part-Number: (No match record)

Product Vendor: USB2.0

Product Model: Flash Disk

Tools on Web: (N/A)

and my 32GB is only 126MB in Disk Management what can i do with them :(

Edited by kmaheshkumar
Link to comment
Share on other sites

Would it be possible that the 4 Gb is actually a "fake" one? :unsure:

Or more probably you misused the tool and "activated" only one of the two "banks" of flash.

In any case the only way to recover the sticks is to running the appropriate utility with the appropriate settings.

I cannot help you in this, you have to read and follow the instructions (if any) coming with the tool and experiment.

Don't worry about the Vid & Pid, they can be changed back to the original ones, that is exactly one of the main uses of the Manufacturer Tools.

jaclaz

Link to comment
Share on other sites

  • 4 weeks later...

hey jaclaz i just replaced my 4gb pendrive so please give me some details how to install the operating system from the second partition of the usbdrive i already told to keep setup source safely from viruses please give some details about that

Link to comment
Share on other sites

Again, the "game" is played this way:

  • YOU post the required info
  • I try and help you

Now, let's start again from scratch.

Choose one and just one of the three sticks you have.

Run Chipgenius on it.

Post the info Chipgenius gives.

List ALL the Operating systems you would like to install from the stick and utilities you want to run.

In the meantime, read these:

http://www.boot-land.net/forums/index.php?...ic=5397&hl=

http://www.boot-land.net/forums/index.php?...ic=5315&hl=

http://www.boot-land.net/forums/index.php?...ic=5274&hl=

jaclaz

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...