nForce 630i + GF7100 AHCI RAID SATA

[loopb]

TXTSETUP.SIF

[sourceDisksFiles]

nvgts.sys = 1,,,,,,3_,4,1

[HardwareIdsDatabase]

PCI\VEN_10DE&DEV_07F4 = "nvgts"

PCI\VEN_10DE&DEV_07F5 = "nvgts"

PCI\VEN_10DE&DEV_07F6 = "nvgts"

PCI\VEN_10DE&DEV_07F7 = "nvgts"

[sCSI.load]

nvgts = nvgts.sys,4

[sCSI]

nvgts = "NVIDIA nForce Serial ATA Controller (AHCI mode)"

[sourceDisksFiles]

nvrd32.sys = 1,,,,,,3_,4,1

[HardwareIdsDatabase]

SCSI\VEN_10DE&DEV_07F8 = "nvrd32"

SCSI\VEN_10DE&DEV_07F9 = "nvrd32"

SCSI\VEN_10DE&DEV_07FA = "nvrd32"

SCSI\VEN_10DE&DEV_07FB = "nvrd32"

SCSI\NVIDIA__Raid_Disk________ = "nvrd32"

SCSI\__NVIDIA_______Raid_Disk = "nvrd32"

SCSI\NVIDIA__Raid_Disk_20_____ = "nvrd32"

SCSI\__NVIDIA____Raid_Disk_20 = "nvrd32"

*_NVRAIDBUS = "nvrd32"

*NVRAIDBUS = "nvrd32"

*NVRAID20 = "nvrd32"

[sCSI.load]

nvrd32 = nvrd32.sys,4

[sCSI]

nvrd32 = "NVIDIA nForce Serial ATA Controller (RAID mode)"

[sourceDisksFiles]

nvgts.sys = 1,,,,,,3_,4,1

[HardwareIdsDatabase]

PCI\VEN_10DE&DEV_07F0 = "ide"

[sCSI.load]

ide = nvgts.sys,4

[sCSI]

ide = "NVIDIA nForce Serial ATA Controller (IDE mode)"

[sourceDisksFiles]

nvgts.sys = 1,,,,,,3_,4,1

[HardwareIdsDatabase]

PCI\VEN_10DE&DEV_056C = "pata"

[sCSI.load]

pata = nvgts.sys,4

[sCSI]

pata = "NVIDIA nForce Serial ATA Controller (PATA mode)"

WINNT.SIF

OemPnPDriversPath="NFORCE\SATARAID; NFORCE\SATAIDE"

It will be good? I hav the AHCI mode in BIOS selected ad in my Windows XP SP3 EN shows a SCSI driver and HDD (name) N0 drive. Is it good?