Stoner81 Posted June 19, 2008 Share Posted June 19, 2008 (edited) Ok folks I have heard that there is a Generic SATA driver out for XP Pro but I cant find it anywhere!!Im trying to rework my XP DVD (due to a large amount of drivers) to include SATA drivers that will work on any system with a SATA drive.So please please help me!!!!!!Stoner81EDIT - Sorry I think I have posted this in the wrong section my apologies if that is the case Edited June 19, 2008 by Stoner81 Link to comment Share on other sites More sharing options...
stans4 Posted June 19, 2008 Share Posted June 19, 2008 Ok folks I have heard that there is a Generic SATA driver out for XP Pro but I cant find it anywhere!!Im trying to rework my XP DVD (due to a large amount of drivers) to include SATA drivers that will work on any system with a SATA drive.So please please help me!!!!!!Stoner81EDIT - Sorry I think I have posted this in the wrong section my apologies if that is the case Doubtful, it'd have to work with every single SATA controller chip out there and there's dozens, if not hundreds, of different makes and models. There might be one that covers one manufacturer's family of chips, though. What I've done is to include drivers for the most popular SATA chips on my boot disk, then do the driver chase if I run across one that's not included(usually laptop). A universal driver would be a Good Thing, just don't think it really exists. It's not like the days with floppy or ST506/402 controllers where the register interface was firmly defined.Stan Link to comment Share on other sites More sharing options...
Stoner81 Posted June 19, 2008 Author Share Posted June 19, 2008 Ok folks I have heard that there is a Generic SATA driver out for XP Pro but I cant find it anywhere!!Im trying to rework my XP DVD (due to a large amount of drivers) to include SATA drivers that will work on any system with a SATA drive.So please please help me!!!!!!Stoner81EDIT - Sorry I think I have posted this in the wrong section my apologies if that is the case Doubtful, it'd have to work with every single SATA controller chip out there and there's dozens, if not hundreds, of different makes and models. There might be one that covers one manufacturer's family of chips, though. What I've done is to include drivers for the most popular SATA chips on my boot disk, then do the driver chase if I run across one that's not included(usually laptop). A universal driver would be a Good Thing, just don't think it really exists. It's not like the days with floppy or ST506/402 controllers where the register interface was firmly defined.StanAre SATA drivers also known as Mass Storage drivers? there are some on driverpacks.net but not sure if they are the same??Any chance you could upload the drivers (SATA) that you have included in your disk? They need to be for XP Pro 32bit version only though m8, thanks a million if you can do this for me it has driven me crazy trying to sort this outStoner81 Link to comment Share on other sites More sharing options...
Octopuss Posted June 19, 2008 Share Posted June 19, 2008 This wouldn't work? http://alter.org.ua/en/soft/win/uni_ata/ Link to comment Share on other sites More sharing options...
jaclaz Posted June 19, 2008 Share Posted June 19, 2008 Yep, and just for the record, UNIATA forum is here:http://www.boot-land.net/forums/?showforum=60jaclaz Link to comment Share on other sites More sharing options...
Octopuss Posted June 19, 2008 Share Posted June 19, 2008 There's not much of talking there Link to comment Share on other sites More sharing options...
jaclaz Posted June 19, 2008 Share Posted June 19, 2008 There's not much of talking there Hmmm, usually we prefer facts....jaclaz Link to comment Share on other sites More sharing options...
Octopuss Posted June 19, 2008 Share Posted June 19, 2008 Yup, but one topic with one post... I don't know Link to comment Share on other sites More sharing options...
jaclaz Posted June 20, 2008 Share Posted June 20, 2008 (edited) Yup, but one topic with one post... I don't know Well, the idea is that you try UNIATA, if it does not work, you try posting there, and maybe you get help.Two possible scenario's explaining why there are no specific posts yet:1) UNIATA release actually usable by final users is relatively recent2) UNIATA gives no problems whatsoever 3) users of UNIATA are computer savvy enough to solve their problems by themselves 4) people which would have time enough to post there, use instead their time to comment the lack of posts (I'll share a secret with you: Boards start empty, and are filled later by the users' posts )...go try helping people... jaclaz Edited June 20, 2008 by jaclaz Link to comment Share on other sites More sharing options...
TechFind Posted June 20, 2008 Share Posted June 20, 2008 (edited) Are SATA drivers also known as Mass Storage drivers? there are some on driverpacks.net but not sure if they are the same??Stoner81Yes these are the sata (raid,etc) drivers you sould integrate in XP Pro 32bit.It's under 30mb.(detailed list of support:http://driverpacks.net/DriverPacks/devices.php?pag=m) Edited June 20, 2008 by TechFind Link to comment Share on other sites More sharing options...
frodo Posted June 20, 2008 Share Posted June 20, 2008 There's not much of talking there Hmmm, usually we prefer facts....jaclazI think that over the years youve picked up my subtle way of answering questions Gotta go, its Mozarella night....@AllAs for UniSATA, for anyone who thinks one pst doesnt mean theres no help available, the boot-land forums are full of some of the most knowledgable people wasting their lives on internet forums ive had the good grace to know. If it doesnt work for you, simply, as jaclaz points out, posy a message, it will get answered. Link to comment Share on other sites More sharing options...
vhrc99 Posted December 23, 2008 Share Posted December 23, 2008 Anyone can tell me how to integrate uniata in textmode?I only receive BSOD, i tried some tricks in txtsetup.sif like put uniata=uniata.sys,4in the [sCSI.Load] section at the bottom list Add all the Id's loaded by uniata in the [HardwareIdsDatabase] sectionchange PCI\CC_0101="pciide" for uniataadd PCI\CC_0106="uniata" but not lucky Link to comment Share on other sites More sharing options...
infiniti25 Posted December 24, 2008 Share Posted December 24, 2008 (edited) You should really post a fresh thread for this question and NOT drag up old posts, but refer to them in your new one. Edited December 24, 2008 by infiniti25 Link to comment Share on other sites More sharing options...
fdv Posted December 24, 2008 Share Posted December 24, 2008 Anyone can tell me how to integrate uniata in textmode?I only receive BSOD, i tried some tricks in txtsetup.sif like put uniata=uniata.sys,4in the [sCSI.Load] section at the bottom list Add all the Id's loaded by uniata in the [HardwareIdsDatabase] sectionchange PCI\CC_0101="pciide" for uniataadd PCI\CC_0106="uniata" but not luckyHere are some instructions on manual integration from Windows 2000.It works the same exact way as XP. Link to comment Share on other sites More sharing options...
jaclaz Posted December 24, 2008 Share Posted December 24, 2008 You should really post a fresh thread for this question and NOT drag up old posts, but refer to them in your new one.Good advice, so that info is spread in another post, info like fdv's one is probably not read by the member who started a new thread, etc......Would this be related to Rule #9? http://www.msfn.org/board/index.php?showtopic=18408For the record:vhrc99started a new thread here:http://www.msfn.org/board/index.php?showtopic=127744&hl=jaclaz Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now