puntoMX Posted February 19, 2008 Author Share Posted February 19, 2008 I splitted up the topic and moved a part to: AHCI problem with my G33T-M2 ECS motherboard. Link to comment Share on other sites More sharing options...
jmartina Posted February 21, 2008 Share Posted February 21, 2008 (edited) OK i got the GA-p35-ds3l its 4 port Sata, im done all of these post and when i boot i get BSOD? anyone helpDoes my Board have to do Raid inorder to use AHCI? Edited February 21, 2008 by jmartina Link to comment Share on other sites More sharing options...
puntoMX Posted February 21, 2008 Author Share Posted February 21, 2008 It would help if you tell us where it goes wrong.Your board, and also my test board, hasn’t RAID onboard. Link to comment Share on other sites More sharing options...
jmartina Posted February 21, 2008 Share Posted February 21, 2008 (edited) Well not sure where it goes wrong....it BSOD as it boots.... I know my sata controllers are 2921 and 2926 all the registry things im seen havent had those numbers, am i missing something here? does the AHCI have different numbers?Could my DVD player have an affect on this? I do see the windows splash scree for about a sec then it BSODSHere are the ID's of my controllers now.... which is different from what im seenPCI\VEN_8086&DEV_2921&CC_0101 = ICH9 family 2 port sata Controller 1PCI\VEN_8086&DEV_2926&CC_0101 = ICH9 family 2 port sata Controller 2PCI\VEN_8086&DEV_2921&SUBSYS_B0021458&REV_02\3&13C0B0C5&0&FA = SATA 1PCI\VEN_8086&DEV_2926&SUBSYS_B0021458&REV_02\3&13C0B0C5&0&FD = SATA 2 Edited February 21, 2008 by jmartina Link to comment Share on other sites More sharing options...
puntoMX Posted February 22, 2008 Author Share Posted February 22, 2008 ... does the AHCI have different numbers?Could my DVD player have an affect on this? I do see the windows splash screen for about a sec then it BSODSNo different numbers, but it could be your DVD(-RW) indeed. Did you run the AHCI_ICH9.REG? As I described the procedure in my first post it should work, just do it over again, you must have missed a step somehow... Link to comment Share on other sites More sharing options...
jmartina Posted February 22, 2008 Share Posted February 22, 2008 PER INTEL and another Post in here.....ICH9, ICH8, ICH7 and ICH6-based chipsets, as well as ICH5 and ICH5R-based chipsets, do not use AHCI. So how any of u with ICH9 got it too work i sure cant Link to comment Share on other sites More sharing options...
cymanet Posted February 25, 2008 Share Posted February 25, 2008 No doubt, AHCI Rulez!!! Testing in my mobo, Gigabyte P35 DS3-L, Seagate 3200.10 320gb Sata 2 16mb cache: Copying folder 793mb from partition to desktop:- Without AHCI, Sata drivers, Write cache enabled: 52 seg.- With AHCI, Intel Storage Manager drivers, Write cache disabled: 39 seg. A big difference, INMHO... The only drawback in AHCI mode is that i can't enabled write cache (is grayed out) Greetings from Spain Link to comment Share on other sites More sharing options...
captainvideo Posted February 28, 2008 Share Posted February 28, 2008 gigabyte ga-p35-s3g, winXpProSP2, WD5001ABYS (500gig sata2)I followed original directions, and at first I got the blue screen STOP. I deactivated sata settings in bios. Rebooted. I went back and right clicked the INF file and selected install, I also went to device manager and selected the IDE device and forced a driver update to the modified files from the floppy image. Changed bios to native sata with ahci. reboot. Windows boots now.Now I just dont know if it is correct. Without SATA enabled in the BIOS, the driver was showing the harddrive as an IDE using DMA 5.With this new intel driver, under "intel ICH9...controller" there is no info on the diskdrive or mode. I also still have listed 'Primary and Secondary IDE'. Under Primary IDE (advanced) device type is auto detect with mode DMA,...current mode is 'not applicable'.I cant tell if this is correct.Are the entries for Pimary and Secondary IDE remaining from the prior driver/prior bios entry?or are these supposed to be there under the AHCI driver?Should I see my SATA interface listed somewhere else. I was expecting a tab with options to turn off NCQ, and info on the current transfer mode (something like "SATA generation 2 3G")I also have a sata dvd burner (liteon) installed and working.I am used to seeing the individual sata chanels listed with maximum transfer rates, and current drives plugged in. I am not seeing them here, and I want to know if I installed the driver correctly, or if maybe I missed something, or need to install something else.Does it look this way for everyone?As a side note, at this point, with the driver installed, if I delete the device entries and reboot, will it boot or will it bluescreen again?---ubcd4windows,I built this cd in november of 07.I had to disable AHCI in bios to get it to boot. (I was able to leave 'native-sata' enabled). I think someone mentioned getting AHCI to work under this environment. Maybe it is a later build, or other drivers were included (slipstreamed).Not exactly on topic, but if anyone is hitting bluescreen with this PE based boot cd, it may be the AHCI. Link to comment Share on other sites More sharing options...
puntoMX Posted February 28, 2008 Author Share Posted February 28, 2008 captainvideo,What you see is not the SATA controller, it’s the PATA controller.You won’t see the mode of your drives that are connected now, just the AHCI controller.You successfully enabled AHCI on your ICH9. Link to comment Share on other sites More sharing options...
jtdoom Posted February 29, 2008 Share Posted February 29, 2008 Hi Captainvideo,if you want to prove it to yoursef, look at detail in the properties screen.The device's HWID will show there, and that line could/should contain CC_0106. Link to comment Share on other sites More sharing options...
captainvideo Posted February 29, 2008 Share Posted February 29, 2008 OK, so I guess you mean this screen. I dont really know what I am looking at there, but I wish i could see something that showed me that my specific drive was being recognized and working under a specified transfer rate. When I look at these entries, i think i am look at the ability of the controller to handle certain types of drives, but i am not certain that i am seeing the fact that a certain drive is being recognized under a specific mode.Maybe it is right there, I dont know. I currently have the westerndigital drive, and I have a SATA liteon dvd drive hooked up. I dont know what the specification for the dvd drive is, but I suspect it is different from the harddrive. I ran HDtune to see if it would tell me anything. I dont know if anything can be seen from that image either as I have never used htune before. My main concern is transfer rates. I was worried that the default setup in my bios (gigabyte/award) was designed to take the sata drives and mimic pata/ide. I installed windowsXP yesterday, and i noticed the drives listed as DMA5. I was thinking that there might be improvement if the harddrive was actually recognized as sata gen2, so I found this thread and here I am. My thanks to everyone that has helped with this. Link to comment Share on other sites More sharing options...
jtdoom Posted February 29, 2008 Share Posted February 29, 2008 the bottom line in that properties/detail screen is the tell tale.You Have AHCI enabled Link to comment Share on other sites More sharing options...
sebmex Posted March 6, 2008 Share Posted March 6, 2008 (edited) Hi everyone.read this interesting post and couldn't use any of the methods mentionned, i hope you can give me a hand.I have a gigybate G33-DS2R motherboard, which is ICH9R equiped.In my windows hardware management screen, I have 2 ICH9 controllers installed which are :ICH9 2 ports SATA Storage controller 2 - 2926ICH9 2 ports SATA Storage controller 1 - 2920What should I do to be able to avoid BSOD on boot when activating AHCI and SATA Native in Bios ?Thank you very much for your help !SebmexP.S. : by the way, when I try to install the Intel Matrix Storage package, it says I don't meet minimum requirements ... I have a raid compatible mobo ... ! how comes it says that ?? Edited March 7, 2008 by sebmex Link to comment Share on other sites More sharing options...
puntoMX Posted March 8, 2008 Author Share Posted March 8, 2008 sebmex,You have a ICH9R, so you need to skip step 2, your chipset is already in that INI file.Intel® ICH9 2 port Serial ATA Storage Controller 1 - 2921Intel® ICH9 2 port Serial ATA Storage Controller 1 - 2921Intel® ICH9 2 port Serial ATA Storage Controller 2 - 2926Intel® ICH9 2 port Serial ATA Storage Controller 2 - 2926Intel® ICH9 2 port Serial ATA Storage Controller 2 - 2926Intel® ICH9 2 port Serial ATA Storage Controller 2 - 2926Intel® ICH9 2 port Serial ATA Storage Controller 2 - 2926Intel® ICH9 2 port Serial ATA Storage Controller 2 - 2926Intel® ICH9 4 Port SATA AHCI Controller - 2923Intel® ICH9 4 Port SATA AHCI Controller - 2923Intel® ICH9 4 port Serial ATA Storage Controller 1 - 2920Intel® ICH9 4 port Serial ATA Storage Controller 1 - 2920Intel® ICH9 6 Port SATA AHCI Controller - 2922Intel® ICH9 6 Port SATA AHCI Controller - 2922Intel® ICH9M 1 port Serial ATA Storage Controller 2 - 292EIntel® ICH9M 1 port Serial ATA Storage Controller 2 - 292EIntel® ICH9M 2 port Serial ATA Storage Controller 1 - 2928Intel® ICH9M 2 port Serial ATA Storage Controller 1 - 2928Intel® ICH9M 2 port Serial ATA Storage Controller 2 - 292DIntel® ICH9M 2 port Serial ATA Storage Controller 2 - 292D* going to edit this post in a bit... Link to comment Share on other sites More sharing options...
Guest silicon_ghost Posted March 9, 2008 Share Posted March 9, 2008 sebmex,You have a ICH9R, so you need to skip step 2, your chipset is already in that INI file.* going to edit this post in a bit...Hrmm, I'm confused, I have the same issue as puntoMX. Following the various instructions failed to get AHCI working.I have a Gigabyte EP35-DS4 that in the device manager shows the following items:Intel ICH9 2 port Serial ATA Storage Controller 2 - 2926Intel ICH9 4 port Serial ATA Storage Controller 1 - 2920Intel ICH9 SATA AHCI ControllerThat last one may be bogus from all the messing around I did attempting to make this work. The sticker on the Gigabyte box has ICH9R on it. Sure am curious what the difference is between ICH9 and ICH9R. Is is simply some level of RAID support? I generally consider onboard RAID bogus as it chews up CPU power; I have a real 3Ware RAID controller in another system I built.Also, I see mentions on the web that I will lose my SATA DVD drive if I enable this AHCI in WinXP. Any truth to that? Link to comment Share on other sites More sharing options...
Recommended Posts