alfreire Posted September 24, 2012 Share Posted September 24, 2012 Thanks, myselfidem... good work... Link to comment Share on other sites More sharing options...
myselfidem Posted September 24, 2012 Share Posted September 24, 2012 Thanks alfreire Enjoy! Link to comment Share on other sites More sharing options...
myselfidem Posted September 28, 2012 Share Posted September 28, 2012 (edited) New 7zSFX_Shortcuts.7z updated including: 7zSFX_Install.reg | 7zSFX_Uninstall.reg | ReadMe.txt (English, French) | Image to see the shorcuts.Thanks to improve or tell me if there is errors!Enjoy!*Edit: Updated and added 3 seconds to close the command prompt Available for x86 or x64 sfx modified modules!7zSFX_Shortcuts.7z Edited September 30, 2012 by myselfidem Link to comment Share on other sites More sharing options...
MgmTest Posted September 29, 2012 Share Posted September 29, 2012 Hi All.Me Test Code But Show Me Error :Error in Line 4 of configuration data:;!@Install@!UTF-8!GUIMode="2"RunProgram="x86:hidcon:cmd /c \"%%T\\file_x86.cmd""RunProgram="x64:hidcon:cmd /c \"%%T\\file_x64.cmd"";!@InstallEnd@!Plz Help For Fix. Link to comment Share on other sites More sharing options...
myselfidem Posted September 29, 2012 Share Posted September 29, 2012 (edited) Yes, gives error!You can use 7zsd_All.sfx and this config.txt;!@Install@!UTF-8!GUIMode="2"RunProgram="x86:hidcon:cmd /c file_x86.cmd"RunProgram="x64:hidcon:cmd /c file_x64.cmd";!@InstallEnd@!Or:;!@Install@!UTF-8!GUIMode="2"RunProgram="x86:hidcon:cmd /c %%T\\file_x86.cmd"RunProgram="x64:hidcon:cmd /c %%T\\file_x64.cmd";!@InstallEnd@!Tested for Daemon Tools Lite and works fine! Edited September 29, 2012 by myselfidem Link to comment Share on other sites More sharing options...
gora Posted September 29, 2012 Share Posted September 29, 2012 ;!@Install@!UTF-8!GUIMode="2"RunProgram="x86:hidcon:cmd /c \"%%T\\file_x86.cmd""RunProgram="x64:hidcon:cmd /c \"%%T\\file_x64.cmd"";!@InstallEnd@!Plz Help For Fix.Correct variants:;!@Install@!UTF-8!GUIMode="2"RunProgram="x86:hidcon:cmd /c \"%%T\\file_x86.cmd\""RunProgram="x64:hidcon:cmd /c \"%%T\\file_x64.cmd\"";!@InstallEnd@!;!@Install@!UTF-8!GUIMode="2"RunProgram="x86:hidcon:cmd /c file_x86.cmd"RunProgram="x64:hidcon:cmd /c file_x64.cmd";!@InstallEnd@!;!@Install@!UTF-8!GUIMode="2"RunProgram="x86:hidcon:file_x86.cmd"RunProgram="x64:hidcon:file_x64.cmd";!@InstallEnd@!;!@Install@!UTF-8!GUIMode="2"RunProgram="%%P:hidcon:file_%%P.cmd";!@InstallEnd@!This variant is not correct too:;!@Install@!UTF-8!GUIMode="2"RunProgram="x86:hidcon:cmd /c %%T\\file_x86.cmd"RunProgram="x64:hidcon:cmd /c %%T\\file_x64.cmd";!@InstallEnd@! Link to comment Share on other sites More sharing options...
myselfidem Posted September 29, 2012 Share Posted September 29, 2012 (edited) HelloP.S if i try to do it after windows is install and run wpi then it works fine to unpack and make a desktop and show overIf you want create a shorcut(s) using 7zsd.sfx modified module you can read the explanation here:http://7zsfx.info/en/Configuration file parameters | ShorcutYou can also see an example for Tools for 7z SFX inside Usage examples (# 5)As example, I create an sfx file customized (using the example above) with two shorcuts on the Desktop:config.txt;!@Install@!UTF-8!GUIMode="2"InstallPath="%ProgramFiles%\\7z SFX Tools"OverwriteMode="2"Shortcut="D,{%%T\\7zSD_EN.chm},{},{},{Description Modified 7z SFX module},{7z SFX module chm},{},{%%T\\7zSD_EN.chm},{0}"Shortcut="D,{%%T\\7ZSplit.exe},{},{},{7z SFX module},{7z archive Splitter},{},{%%T\\7z.ico},{0}";!@InstallEnd@!I set 7z.ico inside the archive 7z first, to have another one!Two shorcuts are on my Desktop to open 7zSD_EN.chm and another to open 7ZSplit.exeHTH Edited September 29, 2012 by myselfidem Link to comment Share on other sites More sharing options...
alfreire Posted September 30, 2012 Share Posted September 30, 2012 (edited) New 7zSFX_Shortcuts.7z updated including: 7zSFX_Install.reg | 7zSFX_Uninstall.reg | ReadMe.txt (English, French) | Image to see the shorcuts.Thanks to improve or tell if there is errors!Enjoy!I use your first version to create sfx (with output exe name fix), one fot x86 an other for x64 sfx file...Windows Registry Editor Version 5.00[HKEY_CLASSES_ROOT\Directory\shell\7zSFX86]"MUIVerb"="Create file 7z-sfx x86""NoWorkingDirectory"="""Icon"="C:\\Program files\\7-Zip\\7zG.exe, 0""Extended"=-[HKEY_CLASSES_ROOT\Directory\shell\7zSFX86\command]@="cmd.exe /c cd/d \"%1\" && cmd.exe /c copy /b \"C:\\Program files\\7-Zip\\7zsd_All.sfx\" + *.txt + *.7z NewSfx86.exe"[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Directory\shell\7zSFX86]"MUIVerb"="Create file 7z-sfx x86""NoWorkingDirectory"="""Icon"="C:\\Program files\\7-Zip\\7zG.exe, 0""Extended"=-[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Directory\shell\7zSFX86\command]@="cmd.exe /c cd/d \"%1\" && cmd.exe /c copy /b \"C:\\Program files\\7-Zip\\7zsd_All.sfx\" + *.txt + *.7z NewSfx86.exe"[HKEY_CLASSES_ROOT\Directory\shell\7zSFX64]"MUIVerb"="Create file 7z-sfx x64""NoWorkingDirectory"="""Icon"="C:\\Program files\\7-Zip\\7zG.exe, 0""Extended"=-[HKEY_CLASSES_ROOT\Directory\shell\7zSFX64\command]@="cmd.exe /c cd/d \"%1\" && cmd.exe /c copy /b \"C:\\Program files\\7-Zip\\7zsd_All_x64.sfx\" + *.txt + *.7z NewSfx64.exe"[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Directory\shell\7zSFX64]"MUIVerb"="Create file 7z-sfx x64""NoWorkingDirectory"="""Icon"="C:\\Program files\\7-Zip\\7zG.exe, 0""Extended"=-[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Directory\shell\7zSFX64\command]@="cmd.exe /c cd/d \"%1\" && cmd.exe /c copy /b \"C:\\Program files\\7-Zip\\7zsd_All_x64.sfx\" + *.txt + *.7z NewSfx64.exe"7zsd_All.sfx and 7zsd_All_x64.sfx must be inside 7-zip install folder...And this for 7zSplit:Windows Registry Editor Version 5.00[HKEY_CLASSES_ROOT\*\shell\7zSplit]@="7ZSplitter""Icon"="C:\\Program files\\7zSplit\\7z.ico""Position"="Top"[HKEY_CLASSES_ROOT\*\shell\7zSplit\command]@="\"C:\\Program files\\7zSplit\\7ZSplit.exe\" \"%1\""[HKEY_LOCAL_MACHINE\SOFTWARE\7zSplit]"Path"="C:\\Program files\\7zSplit\\7ZSplit.exe"[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\7ZSplit.exe]@="C:\\Program files\\7zSplit\\7ZSplit.exe""Path"="C:\\Program files\\7zSplit"Regards and thanks... ;-) Edited November 2, 2012 by alfreire Link to comment Share on other sites More sharing options...
alfreire Posted September 30, 2012 Share Posted September 30, 2012 For test:;!@Install@!UTF-8!Title="Variables %7zSfxVarModulePlatform% module in %%P OS"BeginPrompt=" Check of variables %7zSfxVarModulePlatform% module in %%P OS• Click 'OK', variables will are shown in a console window• Click 'OK', retaining [Shift], variables will be are saved to the file %SystemDrive%\\vars_%7zSfxVarModulePlatform%_module_on_%%P_OS.txt"FinishMessage="The module %7zSfxVarModulePlatform% finished operation"; SetEnvironment="cmnd=@Echo Off& Title Module - %7zSfxVarModulePlatform%, OS - %%P& Echo Module - %7zSfxVarModulePlatform%, OS - %%P& Echo.& Echo Folders:&Set 7zSfxFolder& Echo.& Echo Vars:&Set 7zSfxVar& Echo %%^M=%%M& Echo %%^P=%%P& Echo %%^S=%%S& Echo %%^T=%%T& Set CommonD& Set MyDoc& Echo UserDesktop=%UserDesktop%& Echo."RunProgram="hidcon:cmd /c Echo"RunProgram="%%P:fm0:cmd /k %cmnd%"AutoInstall="hidcon:cmd /c Echo"AutoInstall="%%P:fm20:hidcon:cmd /c (%cmnd%)>%SystemDrive%\\vars_%7zSfxVarModulePlatform%_module_on_%%P_OS.txt"GUIMode="2"GUIFlags="2+4+8+16+32+2048+4096";!@InstallEnd@!;!@Install@!UTF-8:Language:1049!Title="Переменные %7zSfxVarModulePlatform% модуля в %%P ОС"BeginPrompt=" Проверка переменных %7zSfxVarModulePlatform% модуля в %%P ОС• Нажмите 'OK', переменные будет показаны в окне консоли• Нажмите 'OK', удерживая [Shift], переменные будет сохранены в файл %SystemDrive%\\vars_%7zSfxVarModulePlatform%_module_on_%%P_OS.txt"FinishMessage="Модуль %7zSfxVarModulePlatform% завершил работу";!@InstallEnd@:Language:1049!Version module for test 1.6 build 2496Finally, I undertstand your test... X-D Thanks again... ;-) Module - x86, OS - x64Folders:7zSfxFolder00=C:\Users\Administrador\Desktop7zSfxFolder02=C:\Users\Administrador\AppData\Roaming\Microsoft\Windows\Start Menu\Programs7zSfxFolder05=C:\Users\Administrador\Documents7zSfxFolder06=C:\Users\Administrador\Favorites7zSfxFolder07=C:\Users\Administrador\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup7zSfxFolder08=C:\Users\Administrador\AppData\Roaming\Microsoft\Windows\Recent7zSfxFolder09=C:\Users\Administrador\AppData\Roaming\Microsoft\Windows\SendTo7zSfxFolder11=C:\Users\Administrador\AppData\Roaming\Microsoft\Windows\Start Menu7zSfxFolder13=C:\Users\Administrador\Music7zSfxFolder14=C:\Users\Administrador\Videos7zSfxFolder16=C:\Users\Administrador\Desktop7zSfxFolder19=C:\Users\Administrador\AppData\Roaming\Microsoft\Windows\Network Shortcuts7zSfxFolder20=C:\Windows\Fonts7zSfxFolder21=C:\Users\Administrador\AppData\Roaming\Microsoft\Windows\Templates7zSfxFolder22=C:\ProgramData\Microsoft\Windows\Start Menu7zSfxFolder23=C:\ProgramData\Microsoft\Windows\Start Menu\Programs7zSfxFolder24=C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup7zSfxFolder25=C:\Users\Public\Desktop7zSfxFolder26=C:\Users\Administrador\AppData\Roaming7zSfxFolder27=C:\Users\Administrador\AppData\Roaming\Microsoft\Windows\Printer Shortcuts7zSfxFolder28=C:\Users\Administrador\AppData\Local7zSfxFolder29=C:\Users\Administrador\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup7zSfxFolder30=C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup7zSfxFolder31=C:\Users\Administrador\Favorites7zSfxFolder32=C:\Users\Administrador\AppData\Local\Microsoft\Windows\Temporary Internet Files7zSfxFolder33=C:\Users\Administrador\AppData\Roaming\Microsoft\Windows\Cookies7zSfxFolder34=C:\Users\Administrador\AppData\Local\Microsoft\Windows\History7zSfxFolder35=C:\ProgramData7zSfxFolder36=C:\Windows7zSfxFolder37=C:\Windows\system327zSfxFolder38=C:\Program Files (x86)7zSfxFolder39=C:\Users\Administrador\Pictures7zSfxFolder40=C:\Users\Administrador7zSfxFolder41=C:\Windows\SysWOW647zSfxFolder42=C:\Program Files (x86)7zSfxFolder43=C:\Program Files (x86)\Common Files7zSfxFolder44=C:\Program Files (x86)\Common Files7zSfxFolder45=C:\ProgramData\Microsoft\Windows\Templates7zSfxFolder46=C:\Users\Public\Documents7zSfxFolder47=C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools7zSfxFolder48=C:\Users\Administrador\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools7zSfxFolder53=C:\Users\Public\Music7zSfxFolder54=C:\Users\Public\Pictures7zSfxFolder55=C:\Users\Public\Videos7zSfxFolder56=C:\Windows\resources7zSfxFolder59=C:\Users\Administrador\AppData\Local\Microsoft\Windows\Burn\BurnVars:7zSfxVarCmdLine0=7zSfxVarCmdLine1=7zSfxVarCmdLine2=7zSfxVarModulePlatform=x867zSfxVarSystemLanguage=30827zSfxVarSystemPlatform=x64%%M=NewSfx86.exe%%P=x64%%S=C:\Users\Administrador\Desktop%%T=C:\Users\ADMINI~1\AppData\Local\Temp\7ZipSfx.001CommonDesktop=C:\Users\Public\DesktopCommonDocuments=C:\Users\Public\DocumentsMyDocs=C:\Users\Administrador\DocumentsMyDocuments=C:\Users\Administrador\DocumentsUserDesktop=C:\Users\Administrador\Desktop Link to comment Share on other sites More sharing options...
alfreire Posted September 30, 2012 Share Posted September 30, 2012 (edited) A question about InstallPath, how do I get the path "Program files" on x86 and x64...?If I put InstallPath="%programfiles%" I get c:\Program files in x86 and c:\Program files(x86) in x64... x86: and x64: don't work with this command... Regards... ;-)Wow, I'm stupid... InstallPath="C:\\Program files" hahahahaha X-D Edited September 30, 2012 by alfreire Link to comment Share on other sites More sharing options...
mooms Posted October 8, 2012 Share Posted October 8, 2012 Or you could use 64 bit module.Also, from Wikipedia:%ProgramFiles%This variable points to Program Files directory, which stores all the installed program of Windows and others. The default on English-language systems is C:\Program Files. In 64-bit editions of Windows (XP, 2003, Vista), there are also %ProgramFiles(x86)% which defaults to C:\Program Files (x86) and %ProgramW6432% which defaults to C:\Program Files. The %ProgramFiles% itself depends on whether the process requesting the environment variable is itself 32-bit or 64-bit (this is caused by Windows-on-Windows 64-bit redirection). Link to comment Share on other sites More sharing options...
alfreire Posted October 11, 2012 Share Posted October 11, 2012 Or you could use 64 bit module.Also, from Wikipedia:%ProgramFiles%This variable points to Program Files directory, which stores all the installed program of Windows and others. The default on English-language systems is C:\Program Files. In 64-bit editions of Windows (XP, 2003, Vista), there are also %ProgramFiles(x86)% which defaults to C:\Program Files (x86) and %ProgramW6432% which defaults to C:\Program Files. The %ProgramFiles% itself depends on whether the process requesting the environment variable is itself 32-bit or 64-bit (this is caused by Windows-on-Windows 64-bit redirection).Thanks for info... Regards... Link to comment Share on other sites More sharing options...
Tduy Posted October 22, 2012 Share Posted October 22, 2012 how set Password for .sfx Link to comment Share on other sites More sharing options...
alfreire Posted October 22, 2012 Share Posted October 22, 2012 how set Password for .sfxYou must put password in *.7z file, before make *.sfx file...Regards... ;-) Link to comment Share on other sites More sharing options...
DomenicP Posted November 12, 2012 Share Posted November 12, 2012 (edited) ;!@Install@!UTF-8!GUIMode="1"MiscFlags="4"RunProgram="x86:hidcon:file_x86.cmd"RunProgram="x64:hidcon:file_x64.cmd";!@InstallEnd@!file_x86.cmd:rename "%CommonProgramFiles(x86)%\Program\Test\library.dll" library.bakxcopy /y library.dll "%CommonProgramFiles(x86)%\Program\Test\"del /F /Q "%ProgramFiles(x86)%\Program\Test\file.exe"regedit /S regfile.reg shutdown -r -t 3Regards... ;-) Inside your config.txt, try: GUIMode="2"config.txt (saved as UTF-8 file);!@Install@!UTF-8!GUIMode="2"MiscFlags="4"RunProgram="x86:hidcon:cmd /c \"%%T\\file_x86.cmd""RunProgram="x64:hidcon:cmd /c \"%%T\\file_x64.cmd"";!@InstallEnd@!I think the batch need to be improved:file_x86.cmd@echo offMKDIR "%CommonProgramFiles(x86)%\Program\Test"XCOPY /Y "%~dp0library.dll" "%CommonProgramFiles(x86)%\Program\Test\" /C /I /E /H /RREN "%CommonProgramFiles(x86)%\Program\Test\library.dll" library.bakDEL /F /Q "%ProgramFiles(x86)%\Program\Test\file.exe"REGEDIT /S "%~dp0regfile.reg" shutdown -r -t 3Assuming the regfile.reg and library.dll are inside your SFX file!However, I think it's not a good idea to restart the computer at last using SFX file with a batch file!Because the temp folder will be removed and the batch file is already in use and errors may occurs.*Edit: errors about quotes inside config.txt updated and corrected!Hello,Hopefully I can get some help. The MiscFlags="4" is not working for me as well. I tried using the 7zsd_All.sfx and 7zsd_LZMA2.sfx. I'm very new to SFX so just to be clear - I would like the sfx executable I'm creating to prompt for administrator. Config:;!@Install@!UTF-8!Title="Enterprise 6.0.1"GUIMode="2"MiscFlags="4"RunProgram="x64:%%T\x64\setup.exe"RunProgram="x86:%%T\x86\setup.exe";!@InstallEnd@!Thanks in advanced! Edited November 12, 2012 by DomenicP Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now