MSFN is made available via donations, subscriptions and advertising revenue. The use of ad-blocking software hurts the site. Please disable ad-blocking software or set an exception for MSFN. ×
Search the Community
Showing results for tags 'haswell'.
Hello. It seems like only a little while ago I was asking for help to get audio drivers on an old AMD system. Well, that system is starting to show its age (especially the iGPU) and is having trouble with newer running software. So I moved the hardrive with the W2K to the new machine: Dell Optiplex 7020 i7-4790 (Haswell) Intel Q87 chipset ~Limited XP embedded support GTX 750 ti ~XP driver available 8 GB DDR3 500 GB HDD + 320 GB HDD (Windows 2K) Now, this presents a problem as XP support is limited on systems newer than Ivy-bridge and 2000 is non-existent. I also had a partition of XP on the 2K drive and was able to install almost all drivers except USB 3.0 (XP has limited support anyway) and an SM Bus controller. So I started installing Windows 2000 Advanced Server SP4 over the old 2K SP4 Professional installation. I made sure to change the BIOS to ATA mode before the installation (That was the only other option). Windows 2000 SP4 installation went smoothly until it hanged on "Setup is starting Windows 2000". I searched this forum and saw that the communications port needed to be disabled because the W2K setup incorrectly identifies it as a floppy disk controller. After that was resolved, W2K installed with no issue except while it was detecting devices. Two error dialog came up with errors pertaining to "usbhub20.sys". After the system finished setup, it rebooted to a BSOD with this message: Safe Mode could not be used to overcome this, so I booted into the Windows 7 drive and deleted the usbhub20.sys and backed it up in another folder. This allowed W2K to boot, but with no USB 2.0 support. I heard that W2K has issues with USB 2.0 on newer hardware because it has old drivers. The device manager shows many unknown devices. The most important of these are USB 2.0, Networking, and graphics drivers. The first thing I attempted to do was install the Windows XP embedded network drivers for this chipset (https://downloadcenter.intel.com/download/24555/Intel-Ethernet-Drivers-for-Microsoft-Embedded-Operating-Systems?v=t these worked fine on the XP partition). When I use the device manager to install the drivers, W2K states that it was unable to locate a driver for the device, even if I specify the directory. I do have a wireless USB networking adapter that supports XP, but without USB 2.0 there is no hope of getting that to work. I decided to just try updating Windows 2000, starting with IE6 SP1 and the SP4 update rollup 1. The next thing I went to install was IE6SP1-KB2817183-x86 but upon trying to install this it states "Setup could not verify the integrity of the file Update.inf. Make sure the Cryptographic service is running on on this computer". I tried using Start>Run and using regsvr32 to register dlls as suggested online, but sccbase.dll cannot be found and the problem is not resolved. At this point I am wondering if I should abandon this altogether, and be happy with XP (after fixing Win2K's corruption of XP, that is). Help is greatly appreciated!
Hello, I need windos xp driver of Intel® HD Graphics 4400. I tried drivers from intel but setup didn't work and manual install didn't work also. Device ID : PCI\VEN_8086&DEV_041E I tried below driver with manual install. http://drp.su/drivers/notebooks/?v=Gigabyte&m=H81M-S2PV&id=189197&l=en Now XP see vga as Intel® HD Graphics 4400.but there is mark on it and havin code 10 error.