Search the Community
Showing results for tags 'Thinkpad'.
Found 2 results
-
Hi all, this is my first time posting on this forum. First of all, this laptop has 4GB of RAM installed, finding RAM that are small for this laptop is quite challenging and the smallest I got is 1GB which I will try it when it arrives. In the meantime, I attempted to install Windows 98 SE on this laptop, the first stage of the install worked with Jemm386, and this goes successfully. However, when I'm going to continue through the second stage installer, which as far as I know is already in Protected Mode and VMM32 is loaded, it starts, although I have to turn off legacy USB boot option in BIOS. After that, the laptop always hangs after idle for about 30 seconds, which I already cannot continue the setup and I have to hard restart this laptop. Any ideas what to fix and what would be the main problem for this issue? Thanks all.
-
Hi all, i do have a Thinkpad X1 Tablet Gen 3 intel Core i7 8650U 8Gb Ram NVMe SSD M2 Disk with two only USB-C connectors, it's Class 3 Pure Uefi Bios with No CSM neither Legacy Bios, it has been deleted by Lenovo in July 2020. it's very sad news because i know without CSM it's very hard to realize this challenge im dying trying to install Windows 7 x64 i got an Acpi Error BSOD at start. i can figure out the pb of recognizing the usb 3.0 & nvme drivers, but my big pb im looking for a compatible version of the Acpi.sys file to get ride of this dam'n BSOD Or any way to recover These old good Bios Modules (Legacy & CSM) ? The X1 was designed in Early 2018 so before deleting these modules in July 2020, i presume that old versions of Bios firmware do have these modules present, but they denied downgrade firmware ! So please anyone do have Thinkpad X1 Tablet Gen 3 with these Bios CSM & Legacy Modules present can help me Thank you in advance for any idea or suggestion
