According to this http://www.msfn.org/board/index.php?s=&...st&p=774259 uniata should work to recognize SATA drives during install without press F6.. And according to this http://www.vorck.com/windows/2ksp5.html#drvinteg correct me if i'm wrong, but you need the original drivers from your chipset, and integrate by hand to textsetup.sif, anyway i try this instructions. Then i open uniata inf file called uata_xph.inf and put all the strings in the correct format, and modify the section to copy the sys file, but results in BSOD. Then I use this lines and delete all the others that put before PCI\CC_0101.DeviceDesc = "uniata";"Dual Channel PCI BusMaster IDE Controller (UniATA)" PCI\CC_0104.DeviceDesc = "uniata";"Generic RAID IDE Controller (UniATA)" PCI\CC_0105.DeviceDesc = "uniata";"Generic ATA Controller (UniATA)" PCI\CC_0106.DeviceDesc = "uniata";"Generic Serial ATA Controller (UniATA)"the fist line is already in SIF file, and is assigned to PciIde, then i change for uniata, and it works for IDE not for SATA, this time only don't recognize the drives. Another solution in the wild, is to change the line in the [sCSI.Load] section from the first entry to 2nd or the bottom, and no lucky again, the drives don't show. Anyone can tell me how to integrate uniata without BSOD?, or the only solution is to integrate the original drivers from each chipset.