Jump to content

BigDaddy

Member
  • Posts

    551
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    Slovenia

Posts posted by BigDaddy

  1. JOHNC

    HWMONITOR all temps are good. They better be I assembled the PC :)

    Cool'n Quiet is just an option in BIOS. And the rest Win 7 does if the profile is set to Power On Demand. So no need for buggy third party software.

  2. Thus far I ran OCCT, Intel Burn Test, HyperPi set at 32M. Each was run for 8hour. Everything was without error.

    Memtest86+ will be a bit tricky since I am attending to this PC via remote desktop.

    If all the test were successful what are the chances that MemTest86+ will throw an eror?

    BigDaddy, I cannot say if your MemTest will fail. I suppose if it really is a memory problem perhaps only MemTest will find it. I do think the others could also. I think there is a version of MemTest that runs under Windows (never used it). It cannot test all of memory, of course, due to the presence of Windows. Please be sure to try Prime95. It was the one that exposed a HW problem on my XP x64 machine. Is there a chance that the machine is dirty inside? I have seen (and heard) machines that were full of dust and cat hair - burned up the CPU. Some BIOS codes will show various temperatures in the machine. If someone could look, it might prove useful. Did you run HyprPi against all four cores at the same time? Good luck, John.

    machine is brand new. I assembled it. HyperPi was run against all 4 cores naturally. Prime95 also did not return an error. Thus far I guess the only thing is if MEMTEST86+ will show an error. But I am more leaning towards Cool'n Quiet. Because this only occurs when the CPU is idle

  3. Thus far I ran OCCT, Intel Burn Test, HyperPi set at 32M. Each was run for 8hour. Everything was without error.

    Memtest86+ will be a bit tricky since I am attending to this PC via remote desktop.

    If all the test were successful what are the chances that MemTest86+ will throw an eror?

  4. BigDaddy, cluberti has nailed the problem, I think. Are you over clocking your CPU, Memory, etc? Are you trying to run the 4th core of your X3? I think cluberti misread your dump for CPU speed. It is 3.013 GHz, not 3.13 GHz, so maybe that is just the accuracy of the clocks/clock measuring systems. There are several good things to run for testing, if you are not familiar. I run HyperPi (multiple copies of SuperPi), Prime95, MemTest86 and OCCT. If errors occur on any of these, then you need to determine the source, not ignore them. All the programs are free and can be found via a search. Enjoy, John.

    Everything is run @ stock. And the CPU is not an X3 but it is an Athlon II X4 640 3GHz.

    Will run those stress tests you mention.

  5. It's just a normal Win7 x64 installed from the official CD and with all updates installed on a brand new PC.

    I do not have a service pack since it's not out yet.

    Don't know about the BSOD code, because the system is set to restart. Will change it to not restart and give you the code when the BSOD comes back.

    In the meantime if someone could look at the minidumps I would be very grateful.

  6. I have an old nlited WinXP install. But it's problem is that every time I insert a anything into the USB it asks me that the drivers are not certified and if I am sure I want to install the driver.

    I believe the problem has to do with an unsigned USB driver.

    What is the fix?

  7. delete the last comments about the warez version ;) Or do you want a ban?

    Use the MSDNAA version and be happy.

    Will delete the comments about WAREZ version, if you want?

    I just didn't see the point of lying about it especially since I own the genuine Windows.

    btw. To the guide on the first page it should be added how to do it for Windows 7. I can happily make the proper changes, and then a mod can edit the OP's post to also add the section about Win 7 and then also change the title of this thread.

  8. I have Win 7 Enterprise, and it doesn't work for me.

    All I get is this and that is all>

    post-8982-086650900 1284652631_thumb.png

    this is how my commands look like:



    imagex /export D:\VistaAIO\x86\install.wim 1 .\install.wim "Windows 7 Enterprise x86 BIE"

    imagex /export D:\VistaAIO\x64\install.wim 1 .\install.wim "Windows 7 Enterprise x64 BIE"

    oscdimg -n -bD:\VistaAIO\distribucion\boot\etfsboot.com D:\VistaAIO\distribucion d:\Win7-Ent_x32_x64.iso -m

  9. Could the Don't Fear The Reaper be then on the Win 98 CD?

    Really wish we'll be able to find that video. It was awesome.

    btw. Just did a search for Microsoft and Don't Fear The Reaper and nothing comes up.

    Don't think this helps much but in the said video there was a girl who screamed at the end because someone had died..

  10. Come to think about it I believe if was NOT the Win95 CD. But I know it was from a M$ CD. And when started it said

    "Where do you want to go today?"

    And after you clicked it showed you around the CD as in some sort of Encyclopedia.

  11. Hello!

    Just heard the song

    and I remembered that the original CD of Win 95 had the video of this song.

    Does anyone know where can I obtain that particular video? Since the CD has been long gone.

    On a side note, I believe there was another video on the CD from the series called the Happy Days, featuring Fonzy. Anyone knows about this video?

  12. I have a laptop here with Vista Professional and I would like to rename an account.

    But if I rename it using the Acount preferences in control panel then the name of the directory still remains.

    I heard there is a way to create a new account and then migrate all of the settings, docs, files,... into the new one.

    HOw could I accomplish this?

×
×
  • Create New...