webwilli
Content Type
Profiles
Forums
Events
Posts posted by webwilli
-
-
many many thanks for your work and this software
0 -
many thanks for the german version.
very usefull :D:D
0 -
very nice work.
many thanks
0 -
argh.......... even with an original Windows CD SP2 with FDD (USB) no go.
any idea´s here?
edit: nlite seems to work. very good. (Y)
0 -
another test...
nothing better. BSOD... BSOD... BSOD...
we need help
0 -
not yet
always get BSOD
i will try another method later...
0 -
dosnet.inf?
the file iastor.sys exists, iastor.sys and iastor.sy_
i have changed my txtsetup now to this:
[SourceDisksFiles]
iaStor.sys = 1,,,,,,4_,4,1,,,1,4now i test it
0 -
no, nothing change.
ICH7 Raid @Matrix Mode, no AHCI.
i have tested CD or MultiBootDVD. Nothing work. strange....
the textmode load all drivers (also iastor), the text "windows is starting" is the last what i see. Then BSOD.
0 -
i´m despairing...
i have tested many many guides, but ALLWAYS i get a blue (stop 0000007b) error. it´s a "normal" windows, no Multi DVD. the curious thing is, that i use these version 5 months ago and it worked. but now
my txtsetup
[SourceDisksFiles]
iaStor.sys = 1,,,,,,3_,4,1
[HardwareIdsDatabase]
PCI\VEN_8086&DEV_27C3&CC_0104 = "iaStor"
PCI\VEN_8086&DEV_27C1&CC_0106 = "iaStor"
PCI\VEN_8086&DEV_2652&CC_0104 = "iaStor"
PCI\VEN_8086&DEV_2652&CC_0106 = "iaStor"
PCI\VEN_8086&DEV_2653&CC_0106 = "iaStor"
PCI\VEN_8086&DEV_24DF&CC_0104 = "iaStor"
PCI\VEN_8086&DEV_25B0&CC_0104 = "iaStor"
[SCSI.load]
iaStor = iaStor.sys,4
[SCSI]
iaStor = "Intel(R) Series SATA RAID Controller"i have the newest intel iastor driver. My board is a asus p5wd2 with intel ich7raid.
0 -
and without AutoIT ?
0 -
thx moo
works
fw.msi Serialnumber=xxxx-xxxx-xxxx-xxxx /qb- Reboot=Suppress
0 -
how can i disable the new starwind service?? any idea?
0 -
After adding your key manually,export the following key from registry,use that reg file for your UA register instead.works for me with 5.0.325
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\LK.Auto
works THANKS
0 -
same problem here
kav5.0.325_personalde.exe with key file in one folder
start setup with kav5.0.325_personalde.exe /S
but no key file found, when i start kav after install.
0 -
i have a little problem with mapdrive.
vmware
one hdd with 4 partitions
mapdrive should give the fourth partition the Letter "L" <- this work
mapdrive must to leave the third partitions @ Letter "E" <- but mapdrive give this part the letter "Y". no DRIVE.x file at this part.
an installation without mapdrive works. E remains constant.
i made a DRIVE-.E file, but it won´t help.
what make i incorrect?
0 -
this works here:
start /wait %systemdrive%\install\Applications\msn\MsnMsgs.msi IAGREE="Yes" ADDEXPLORERTOOLBAR="" SETSEARCHENGINE="" /quiet
0 -
this works for me:
md "%programfiles%\Gemeinsame Dateien\Kaspersky Lab"
COPY /Y "%systemdrive%\install\Applications\antihack\*.key" "%programfiles%\Gemeinsame Dateien\Kaspersky Lab\"
start /wait %systemdrive%\install\Applications\antihack\kasp1.7.130_anti-hackerde.exe /S
i don´t now what "Gemeinsame Dateien" is in english.
0 -
nice guide.
but this won´t work for me and my intel ich6 raid system
what can i do now??
0 -
Step 1:
Get a network bootdisk. I suggest getting it here http://www.netbootdisk.com/ because this one supports A LOT of drivers (out-of-the-box). I have yet to find a network card that it doesn't. Even VMWare's is supported!
Step 2:
Follow the steps at http://unattended.msfn.org/ and don't finalize your CD/DVD. Move the $OEM$ folder into the I386 folder. Share the folder which contains the I386 folder (for example XPCD). You might want to create a new user on the server, if you don't want to use the administrator's for security reasons.
Step 3:
Now boot your network disk and connect to the share on your server.
If you use the http://www.netbootdisk.com/ then if the menu pops up (and the computer beeps) you should press a key to configurise the disk (needed only one time because the settings will be stored on the disk). The setting up itself is pretty easy. For example if you created a user on your server named unattended with password unattended then you should change these values accordingly. Also specify if you use DHCP or not. Then when the disk is completely loaded you can connect to the server using: net use z: \\servername\sharename
Of course if you use another bootdisk then this may be different.
Step 4:
Once connected run the setup using: \i386\winnt.exe /s:\i386 /u:\I386\winnt.sif
Good luck! Remember to remove your disk once loaded because you don't want your computer to keep booting from the bootdisk!
Very nice Tip!! Many thx.
After i start \i386\winnt.exe /s:\i386 /u:\I386\winnt.sif, the blue windows screen came and it copy files. I "see" the files copy buttom right. But it never stopp. heavy to explain In the main windows stand "Windows copy the files..." My HDD works a lot, but nothing happens. What can i do??
0 -
ok, it works
the german string is
"Der angegebene Buchstabe wurde diesem Laufwerk bereits zugewiesen."
0 -
nice tool... i search a long time for this tool
but i´m too stupid to use it
what preparatory work must i do?? thx for your support.
0 -
i don´t know
this makes no fun
0 -
no multiboot dvd. just a normal single windows xp prof cd
0 -
How integrate Language pack in Windows 7 RC English
in vLite
Posted
thanks for this very helpful tool
i have successful integrate a german LP to build 7229.
But after the integration i can´t use VLite to shrink the installation. VLite still crashes.
Any solution for the this?