ok i bought a new 2800+ processor last night to go into my new systen i am building, the old system was abit an7 motherboard amd duron 1600mhz ati radeon 9800xt and the fan is a volcano something or other which kept the duron at a steady 35 degrees. so anyway i swapped out the 1600 duron and put in the 2800+ using the same cooling device which is rated upto a 3200+ and straight away the temperature warning buzzer came on so i cut the power, checked everything again yep all correct, i have some of that spray that cools stuff to minus 50 degrees to detect cooling problems so i sprayed some of that in and i could get the system to boot, i looked into the bios on voltage monitoring and the processor is getting 2v throught it and was running at 11 degrees. so i reset all the cmos to default and tried again but no luck still the same problem, thinkinkg it could be a faulty power supply i swapped out the old one for a spare one which is brand new out of my other system and still the problem. so guys what do you think it is the board or the processor, i have not tested the 1600 duron back in the board but i will and let you guys know. please help