Jump to content

Computer Commando

Member
  • Posts

    47
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    United States

Posts posted by Computer Commando

  1. I'm not so sure your monitor is bad. Viewsonics are very good and your model is even better. Maybe you're just unlucky and it was time for it to go.

    Don't turn it off, let the computer "turn it off". I've got a 19" MAG and it does the same kind of clicking. I never turn it off, when the computer shuts down, the monitor "goes to sleep".

  2. What you want to know is here: http://win2k3.MSFN.org/

    All you applications will work, but many peripherals will not (mouse drivers, digital camera drivers, scanner drivers). Win2k3 was designed to be a Server, not a Workstation, but it can be tweaked to perform more like a workstation. I used an evaluation copy for several months.

    If you want to try out your copy, create a separate partition and configure for a multi-boot (I use Partition Magic/Boot Magic).

  3. Nexuz:

    TweakUI 2.10.0.0 has no selection to perform this function. If you would read it is says: "If you are running an evaluation version of Windows, the version will always be displayed.

    strider_D_3000:

    Installation of VB6 does nothing to help.

    For those of you who cannot or refuse to read, this thread refers to TweakNT, not TweakUI. They are not the same.

  4. ...Using rj-45 ethernet cable connect the modem to the router ( WAN slot ), out from router starting with slot 4 on the router run rj-45 ethernet to your first PC, and slot 3 to the last PC...

    Correction to you. From the Linksys BEFSR41 manual:

    "NOTE: For ease of installation, start with LAN Port 4, then Port 3, then Port 2, and finally Port 1."

    It does not matter which ports you connect, pick any 2 of the 4 for your 2 computers.

×
×
  • Create New...