Jump to content

David Silaban

Member
 View Profile  See their activity

  • Posts

    8

  • Joined

  • Last visited

  • Donations

    0.00 USD 

  • Country

    Indonesia

About David Silaban

Profile Information

  • OS
    XP Pro x86

David Silaban's Achievements

0

Reputation

  1. David Silaban
    Unfortunately still doesn't work... Another thing I tried is this problem exists when I run Windows 98 Setup, press Continue and after the 1st loading progress bar, I hit cancel so I got back to DOS. I tried doing stuff like "mem /c /p" a few times and when I left it around 30 seconds, it stops responding to any keyboard/touchpad events.
  2. David Silaban
    Hi guys, a little update.. I tried to install Windows 95 OSR2 + FIX95CPU it works quite well no errors, even with the USB Legacy Option enabled. But when I tried reinstalling Windows 98 SE again even with the patcher9x fix it still gave me the same hang, it cannot even boot to the UI if USB Legacy Option is enabled in the BIOS. The installation also hungs if I just use HIMEMX, if I use JEMM386 then it will not hang and continued through the setup successfully.
  3. David Silaban
    The driver is for accessing the internal hard drive without using the BIOS emulation driver, like direct access to it?
  4. David Silaban
    Thanks for the replies. I have tried burnmem, xmsres, limitmem, all comes to the same system hang problem. I have also tried lowering the RAM (I got 2GB RAM for now) it still comes to the same problem. Interestingly I tried using QEMU to try to simulate the modern system using -M q35 option and setting -m to 4G of RAM, the system crashes on the Insufficient memory error, but it is resolved using Rloew's PATCHMEM. The system boots to the enter User Information screen without any hanging whatsoever... I'm guessing there is a problem with the BIOS emulation of the disk driver, the laptop might be crashing on accessing the disk drive (but only on Protected Mode), which is reproducible by pufengdu's trick on changing the ShellName to COMMAND.COM, which loads VMM32 in DOS but does not go to Windows UI. The problem also appeared on this setup, the system suddenly hung up after 30 seconds. Btw, do you know any DOS IDE, SATA or AHCI driver?
  5. David Silaban
    I tried Memtest86+ v4.00 and it just hangs at the bluescreen with nothing seems to be happening, keyboard does not respond at all. I'm still waiting for my 1GB RAM in mail order to come to see if that will work... Which patches that are required for this to work? I just tried PATCHMEM and it still hangs at the same place.
  6. David Silaban
    Sorry I meant that at the point when Windows boots for the first time after installation, the system hangs 30 second after Windows finally displays its UI, it hangs like for example when typing the serial number, it can also hang by leaving the laptop doing nothing for 30 seconds.
  7. David Silaban
    Thank you for your advice. I tried HIMEMX, MaxPhysPage, RLoew's PATCHMEM but unfortunately all end up in that hang on idle thingy.. Is this caused by the Disk drivers or did it tries to overwrite the EBDA? I tried to debug with SoftICE but even SoftICE unable to catch the issue
  8. David Silaban started following Windows 98 SE install attempt on Thinkpad T410
  9. David Silaban
    Hi all, this is my first time posting on this forum. First of all, this laptop has 4GB of RAM installed, finding RAM that are small for this laptop is quite challenging and the smallest I got is 1GB which I will try it when it arrives. In the meantime, I attempted to install Windows 98 SE on this laptop, the first stage of the install worked with Jemm386, and this goes successfully. However, when I'm going to continue through the second stage installer, which as far as I know is already in Protected Mode and VMM32 is loaded, it starts, although I have to turn off legacy USB boot option in BIOS. After that, the laptop always hangs after idle for about 30 seconds, which I already cannot continue the setup and I have to hard restart this laptop. Any ideas what to fix and what would be the main problem for this issue? Thanks all.
×
×
  • Create New...