Jump to content

alexthetechie1

Member
  • Posts

    17
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    United States

About alexthetechie1

  • Birthday 01/13/2006

Profile Information

  • OS
    Windows 11

Recent Profile Visitors

4,419 profile views

alexthetechie1's Achievements

0

Reputation

  1. can you guide me thru this pls?
  2. I have successfully installed windows 7 on an i5-13400F and GTX 960 4GB everything works except windows experience index ( fails at testing memory ) and my ethernet controller ( intel ethernet connection (17) i219-V ) WiFi does work but is very slow due to being far from the router anyone have a custom ethernet driver? ive listed my hardware IDs bellow
  3. PCI\VEN_8086&DEV_1A1D&SUBSYS_1A1D1849&REV_11\3&11583659&0&FE
  4. anything requiring the Rockstar Games launcher most likely will require windows 10
  5. 1440x900 just enters sleep mode (monitor says digital input entering power save) now it only boots in safe mode but ive resorted to windows ME and same thing
  6. could i replace the RTX 4060 8GB with a GTX 960 4GB i have laying around? and could you possibly link a driver for my ethernet if i have the lucky variant?
  7. Hello i currently have a pretty modern pc i'd like to attempt to get windows 7 on i have booted into the installer just to see if it boots and it does (CSM boot only) Just wanting to verify i can get things working before i install Motherboard: ASRock B760M-C/D4 Ram: 32GB DDR4 2133MHz (4x 8GB DDR4) CPU: 13th Gen i5-13400F 2.5Ghz 10 cores 16 threads GPU: RTX 4060 8GB Storage: 2x 1TB M.2 / NVme SSD's and 1x 2TB SATA SSD Ethernet: Intel(R) Ethernet Connection I219-V Wi-Fi: Intel(R) Dual Band Wireless-AC 3168 BT: Intel(R) Wireless Bluetooth(R) Audio: High Definition Audio Device
  8. it still does not work for me
  9. yea ME was better on older hardware / hardware designed for it. 98SE ran fine with no drivers whatsoever but after each driver was installed it became more unstable - occasionally booting into safe mode randomly , refusing to shut down / randomly it would power itself off when entering sleep mode (then engaging scandisk) maybe its the Pentium 4 but who knows
  10. I tried that i just get a black screen at boot, I'm probably just going to stick with windows ME, it seems to work a lot better and no need for the "Setup /p i" setup switch at the beginning in DOS
  11. DVI - Dell S199FWP GeForce 6200 256MB PCI DDR2 DX9
  12. the graphics driver works (ver. 82.69) however 1440x900 which is native for my monitor doesn't work it just puts my monitor to sleep 1360x768 works on a 1440x900 monitor but doesn't look that sharp sadly
  13. So when setting up Windows 98 I entered this into the dos prompt after formatting drive C setup /p i And I also have over 512mb of ram (1015mb) which boots fine but I installed the ram patch just to prevent issues ill keep you posted if this works
×
×
  • Create New...