mcsoba
Content Type
Profiles
Forums
Events
Posts posted by mcsoba
-
-
Hello i need information on MY HD 160GB seagate
After the command F3 1> N1
I withdraw the power and wait 20 seconds I re-plug the cable
And I receive this strange message> InitiatedMarkPendingReallocateRequest for disc_lbaThis freezers the terminal, Where is wrong?
After this I enter with Crt commandAfter this I enter with command CRTL+Z And I finish the process..F3 T> I4,1,22F3 T> m0,2,2,,,,220 -
-
Still i yet not managed ... I do everything correct and hyperterminal not appear nothing .. ctrl+z
think you may be the HD board?? transistor or IC or diode??
the pins correct this way?? from HD [. GND TX RX]
i tried also with CA-42,,, from DKU the right and connect on the on pin 3.3v or 5V???
thank ...
0 -
I tried it with other adapters: CA-42 and PL2303HX USB para RS232 TTLstill not work,,what is wrong? I understand t have connect the 4 ground wires together...1point PSU - 2point AAC - 3point Adater - 4 point HD emin the form of X ? 4pointas if it were X ?and i turn the 2AA 1.5+1.5 .... okin adapter i turn batery on pin 3.3v or 5v ??0
-
i continues without understanding how to connect the ground ...Octopus in this case and adapter?gnd need to plug together on tip adapter or the tip of PSU??You should draw a schematic for me ...Tk ...loopback test I'm trying to do but nothing appears nehum character ....just when I backboard the ground on rx or tx separate appears strange characters,, hearts,,interrogations ....when I backboard rx and tx not have any return,,,this happens only in 5v,,3v not working ...
what's wrong with hyperterminal?
0 -
I connect the GND on the adapter and 3.3v from PSU,,,this ok ....more adapter has only one ground output,,,to HD also connect the same ground from adapter? so i need connect GND from adapter to HD and PSU together??I am using these two:0
-
helloI'm problem with HyperTerminal,, I have connected cable usb/serial + adapter serial/TTL max232 + 3.3v orange power supply and Black GND + TX and RX on HDwhen I enter the HyperTerminal CTRL+Z It appears only strange symbols,,, the characters in different keyboards,,,I installed the drivers from the cd USB-SERIAL CH340 (COM3); CH341SER.INF; Driver for CH341 (USB=>SERIAL chip) V3.1
This drive should be PL2303_Prolific ??,, ma I cannt reverse the drivers ...
0 -
hi
I can convert this USB to DB9 Adapter only changing the pins???
http://i.imgur.com/jLQ4Y5N.jpg
USB = VCC + DCD + DSR + RI + RTS
DB9 = DCD + RXD + TXD + DTR + GND + DSR + RTS + CTS + RI
0 -
I understand that I have to combine this ...even missing another converter until the PC port ...I think myself could fabricate this cable using only one DB9 male to USB, changing the pinout ....but i discover now this cable must be a professional,,right?is not so very simple this cable have to buy same,, why has microchip involved for this conversion,,right? http://www.ftdichipI thought it was just changing the pin DB9 to USB,,,,D+/TX,,,,D-/RX,,,,GND/GND
thank you ...
0 -
okey thanki no understand yet ..then this adapter no will be used for anything ??or i need connect to RS-232 port adapter female to Direct on PCport male ??? (I already did it but not work)or need to convert first to usb the DB9female adapter port???i not connect directly to the PC adapter??
0 -
hello please
I have adapter max232 to ttl http://i.imgur.com/QXY4BKL.jpg
I turn him in Vcc 5v supply on molex pc,, the correct ?the lights up but nothing happens,,not appear port on pc...I think I need to convert to USB??how to convert DB-9 to usb,,which the pin??from usb = 1vcc ,, 2D- ,, 3D+ ,, 4gndto DB9 ???0 -
Tkss ...
yes RS-232 extension cable,,i followed this source Wikipedia...
after Christmas I will do missing now TORX6 ...
merry christmas to all...0 -
really
the other side of the board,,but this a bit erased I can identify.....VCC = CTS
DCD = Data Carrier Detect = GND
DSR = Data Set Ready = RXD
RI = Ring Indicator = DTR
RTS = Request To Send = TXD
----------------------------------------------------
------------------------------------------------------
From Adapter (TX) to >>> RX (on Seagate)
From Adapter (RX) to >>> TX (on Seagate)
I can connect the powersupply PC Direct on HD???
okey???
--------------------------------------------------------
---------------------------------------------------------
I purchased one adapter RS232 to TLL female
waiting for the delivery....I can connect directly the adapter to the PC male??,,or need to use a cable nullmodem???
0 -
ok Tk....
I still can not indentificar,,am not good at electronics,,,
VCC =
DCD = Data Carrier Detect
DSR = Data Set Ready
RI = Ring Indicator
RTS = Request To Send
----------------------------------------------------
Transmitted Data = TXD
Received Data = RXD
Signal Ground = G
who and who here?? ST3320613AS///CC2H
0 -
Hello people...
need to know to identify the pins,,i have a DKU adapter outputs with::VCC,,,DCD,,,DSR,,,RI,,, RTSto connect on seagate only RxD TxD GND????
what are they in this case???Please TKssss
0
The Solution for Seagate 7200.11 HDDs
in Hard Drive and Removable Media
Posted · Edited by mcsoba
Hi Jaclaz
Finally I managed Unlocked two HDDs 320GB and 160GB .. But The two processes have the same problem, i receive the messagem: ((No Phy: Staggered spin bypass)) what is wrong