Jump to content


  • Posts

  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    United Kingdom

Posts posted by ABEO

  1. This is the full code for the whole form:

    	<form id="fade" class="viz" style="width:680px; filter:progid:DXImageTransform.Microsoft.Fade(duration=2); -moz-opacity:0;" method="get" action="search-results.php">

    <select name="cboRegion" id="cboRegion">
    <option value="null"<?php if (!(strcmp("null", $_GET['cboRegion']))) {echo " selected='selected'";} ?>>Any Region...</option>
    <option value="Blanca"<?php if (!(strcmp("Blanca", $_GET['cboRegion']))) {echo " selected='selected'";} ?>>Costa Blanca</option>
    <option value="Calida"<?php if (!(strcmp("Calida", $_GET['cboRegion']))) {echo " selected='selected'";} ?>>Costa Calida</option>

    <select name="cboPropType" id="cboPropType">
    <option value="null"<?php if (!(strcmp("null", $_GET['cboPropType']))) {echo " selected='selected'";} ?>>Any Property Type...</option>
    <option value="Apartment"<?php if (!(strcmp("Apartment", $_GET['cboPropType']))) {echo " selected='selected'";} ?>>Apartment</option>
    <option value="Bungalow"<?php if (!(strcmp("Bungalow", $_GET['cboPropType']))) {echo " selected='selected'";} ?>>Bungalow</option>
    <option value="Commercial"<?php if (!(strcmp("Commercial", $_GET['cboPropType']))) {echo " selected='selected'";} ?>>Commercial</option>
    <option value="Duplex"<?php if (!(strcmp("Duplex", $_GET['cboPropType']))) {echo " selected='selected'";} ?>>Duplex</option>
    <option value="Finca"<?php if (!(strcmp("Finca", $_GET['cboPropType']))) {echo " selected='selected'";} ?>>Finca</option>
    <option value="House"<?php if (!(strcmp("House", $_GET['cboPropType']))) {echo " selected='selected'";} ?>>House</option>
    <option value="Villa"<?php if (!(strcmp("Villa", $_GET['cboPropType']))) {echo " selected='selected'";} ?>>Villa</option>
    <option value="Quad"<?php if (!(strcmp("Quad", $_GET['cboPropType']))) {echo " selected='selected'";} ?>>Quad</option>
    <option value="Other"<?php if (!(strcmp("Other", $_GET['cboPropType']))) {echo " selected='selected'";} ?>>Other</option>

    <select name="cboStatus" id="cboStatus">
    <option value="null"<?php if (!(strcmp("null", $_GET['cboStatus']))) {echo " selected='selected'";} ?>>Any Status...</option>
    <option value="New"<?php if (!(strcmp("New", $_GET['cboStatus']))) {echo " selected='selected'";} ?>>New</option>
    <option value="Resale"<?php if (!(strcmp("Resale", $_GET['cboStatus']))) {echo " selected='selected'";} ?>>Resale</option>
    <span class="viz" style="width:680px; filter:progid:DXImageTransform.Microsoft.Fade(duration=2); -moz-opacity:0;">
    <select name="cboPrice">
    <option value="null"<?php if (!(strcmp("null", $_GET['cboPrice']))) {echo " selected='selected'";} ?>>Any Price...</option>
    <option value="0"<?php if (!(strcmp("0", $_GET['cboPrice']))) {echo " selected='selected'";} ?>>0 - 100.000</option>
    <option value="100000"<?php if (!(strcmp("100000", $_GET['cboPrice']))) {echo " selected='selected'";} ?>>100.000 - 140.000</option>
    <option value="140000"<?php if (!(strcmp("140000", $_GET['cboPrice']))) {echo " selected='selected'";} ?>>140.000 - 180.000</option>
    <option value="180000"<?php if (!(strcmp("180000", $_GET['cboPrice']))) {echo " selected='selected'";} ?>>180.000 - 220.000</option>
    <option value="220000"<?php if (!(strcmp("220000", $_GET['cboPrice']))) {echo " selected='selected'";} ?>>220.000 - 260.000</option>
    <option value="260000"<?php if (!(strcmp("260000", $_GET['cboPrice']))) {echo " selected='selected'";} ?>>260.000++</option>
    <input class="submit" type="submit" value="SEARCH" />

    Where do I put that check code?

    I am an absolute novice at this by the way, thanks for replying.

  2. I have a quick search form on a property website, on Firefox and IE7 I get an Undefined Index error.

    Notice:  Undefined index:  cboPrice in /home/fhlinux159/s/spanishhomesjustforyou.com/user/htdocs/ssi/quiksearch.php</b> on line 16

    I am getting this on several lines of code, all of which are drop down boxes, all with very similar code.

    Here is line 16:

    <option value="null"<?php if (!(strcmp("null", $_GET['cboRegion']))) {echo " selected='selected'";} ?>>Any Region...</option>

    If anyone has any information on this, or can help out, I would be very grateful, let me know if you need anymore info.


  3. Hi everyone, does anyone here know if it is possible to assign a COM port address to a USB device?

    I have a cash drawer that uses a serial connector to connect to the PC, but this PC has no Serial adaptors on the back, I have a Serial -> USB convertor, but to use this with the Software I need it to use a COM port number.

    I am stumped on this one, any ideas?

  4. I have searched for hours and not come up with anything for this, hopefully somebody will be able to help me.

    At my place of work(a computer shop) we have a computer connected to the till etc. We also have a handheld barcode scanner, that connects to the PS/2 port. The scanner is a Metrologic Pulsar MS6220, the manufacturer has some software to connect and configure it. However the software won´t allow you to use it through the PS/2 port, in fact it doesn´t even have settings for the specific model.

    The software will only let you connect to it through COM1, COM2 etc.

    So my question is, is there anyway to route the PS/2 port to a COM port, or to make the computer view the PS/2 as a COM port, so that the software will recognise it?

    Thanks in advance

  5. My motherboard runs at PCI-e 4x.

    I have just won a card on eBay, I don't know how much you care, but the card I won is:

    7300GS 256Mb PCI-e

    I won'd it for £23.49/€43.16/$46.68

    So I think thats pretty good, it's the card you guys suggested, at less than half what I wanted to pay.

    My next upgrade will be 2x 1Gb DDR2 533Mhz as soon as the prices start dropping :)

    Thanks for all your help, I'll post when it has arrived and is installed and running.

    Thanks again!!

  6. Ok I´ll find it somewhere else.

    Is that the one to get then? Something in the 7600 series?

    I have been comparing it with the 7300GT. I have seen one for sale with 512Mb Memory, is that possible? All the others I have seen are 256Mb. I think 256Mb would suit me fine. But might aswell get the 512Mb PCI-e card if it´s real!

  7. Wow, quick replies.

    Ok my motherboard can accept PCI-e. I was thinking, if I get a PCI-e card now, then if I ever upgrade my motherboard again, I won´t need a new graphics card. Obviously it has to be fairly cheap though.

    As I said I don´t really want it for heavy gaming, but if it were capable of playing the odd game that would be great.

    Do NewEgg ship internationally?(I´m in spain)

    Like I previously mentioned I would like it to be under $100 but to last for quite a while. So I want the best I cen get within that budget. Would a 7300GT be best?

    I have just looked on newegg and they have this card:

    XFX PVT72GWANG GeForce 7300GS 512MB(256MB on Board) GDDR2 PCI Express x16 Video Card - Retail

    for $69.99, is it one of those HM cards I´ve been advised not to get?

    A bit further down there is this card:

    Arcade FX GF7300GS256 GeForce 7300GS 256MB GDDR2 PCI Express x16 Video Card - Retail

    That one is onlt $56.99

    Are these cards any good? Or are they significantly worse meaning it would be worth spending another $30-$40 for the GT model?

  8. Hi everyone, I would like your suggestions on a new graphics card.

    My current system is as follows:

    CPU: Intel Pentium D 3.4Ghz

    Motherboard: Asus P5VDC-X

    RAM: 2 x 512Mb DDR PC3200

    HDD: Seagate Barracuda 250Gb Sata & Maxtor 120Gb IDE

    Graphics: nVidia GeForce3 Ti200 64Mb

    I don't play many games, if I do I tend to prefer older games(AOE, Civ2) lately I have been playing TR: Legend, but not usually anything too special, although I would like the new graphics card to run some of the later games(just in case :P)

    Other than that all I use is Office, and internet etc.

    I have Vista Ultimate installed at the moment, so I would like a card that will run Vista well with all the features(Aero, Flip3D etc).

    And I want something that will last a while.

    My budget is about £50/€70/$100

    Obviously the cheaper the better, but I don't really like spending too much on my PC, especially when it pretty much works as it should now!

    Any advice on this matter would be greatly appreciated!

    Also, my current Experience index rating on vista is 1 for "Gaming Graphics" and 1.9 for "Graphics" I have the latest drivers for the card installed, would this be due to the low memory or something else?

  9. Hi everyone.

    At work we have Windows Vista PCs for sale, I'd like a screen saver (or standalone slideshow), that we can have running on the PCs to show different features of Windows Vista, to give customers an idea of the look and feel, without creating any problems for us :P

    Anyone know of such a screen saver, or have any suggestions that we could use?

    Thanks in advance! :thumbup

  10. I have just upgraded the CPU on a machine for somebody with a QDIgrp WinneX 1E Motherboard.

    I tested it all a few times, worked ok, sent it back to him and he said that after turning it on and using it twice, it wouldn't turn on, he said he turned it on and off a few times then it worked once, he was ableto removed some needed files before it stopped working again and it hasn't worked since.

    He said that when powering up it doesn't even get to the post screen or the beep. He said it's just black screen, the drives power up but nothing else.

    When I was upgrading it I had a similar problem with the memory, it wouldn't accept 133Mhz RAM so I had to put the old RAM back in, and it wouldn';t work when the two chips(both the same) were in one way, but when I swapped them they were fine.

    Do you think it could be a memory problem? or is it a Motherboard problem?

    What is the best solution in this situation?

  11. The linksys WRT54G is a very popular/inexpensive Wireless G router. It has adjustable antennas in that you can swivel them, if that's what you're looking for, but not extendable ones.

    I'll check that router out, somebody mentioned that if you can take the antennas off on a router and add extending ones they are usually more responsive or something like that.

    I'll have another look through the settings, thanks for your insight!

  12. Hey Guys, sorry I haven't replied in a while(internet problems :P)

    @cyberpyr8, Is there anyway that you know of to stop other things interfering without going round to peoples houses and asking if they use a cordless phone?

    Also, does anyone know of a wireless Modem & Router(in one) that will work better than belkin, be fairly cheal, and with adjustable antennas preferably?

    Thanks again everyone!!

  13. It does sometimes work, that is what is confusing me, it will work for say 24 hours, then it will just stop responding, and won't work till I reset the router, and even then it might not work for a while. It just seems a bit tempremental...

    I don't think there are any firmware updates, I have looked.

    I just wondered if anyone else had this router and experienced problems.

    Thanks for the tips, I'll check over the settings again now.

  14. rendrag, Thanks for the reply!

    The laptop doesn't have a NIC jack on it no, I would have tried that, I don't fancy taking the PC downstairs and testing it that way.

    The laptop seems to always connect, but it is VERY slow.

    I have re-installed XP on the PC, and it seems to be working better now(it actually connects now) but it still isn't up to speed really(considering it's 1Mb broadband!).

    The PC always connects to the router at about 80Mbp/s, so I don't think it's a connectivity issue, but then again when it's not working I can't access the router either.

    The fact that it works after re-installing XP suggests that it was either some wrong network settings, or some software conflict(seemed to start happening after I installed FireFox) After re-installing I installed McAfee security centre as an alternative to Zone-Alarm, AVG, and a couple of other programs, that seems to be working well too.

    Any more help would be appreciated!

    Thanks again!

  15. I have had a search and can't seem to find anything relating to my problem, so any help would be greatly appreciated!

    The situation is this:

    I have a laptop and a pc running on a belkin wireless network.

    The laptop seems to be slow accessing web pages, logging into Msn, downloading etc.

    BUT it works...

    Up until a couple of days ago(before installing Firefox) the pc was running fine, but now it will connect to MSN, but won't connect to the Gmail notifier, or access ANY web pages. if I reboot or disable then re-enable the connection it will let me load webpages for a while then it will just stop and I will get 'page cannot be displayed' errors.

    Firefox won't work either, it says that the site is taking too long to reply, and that is for any site.

    I can't even log onto the router from the pc(via the local ip address).

    The router is a 'Belkin modem with high-speed 11g router' F5D763*-4 I believe.

    Has anyone had similar problems? is it my network settings on the computer?

    I have tried to make sure everything is the same as on the laptop but there may be something I am missing.

    Thanks in advance everyone!!

  • Create New...