Content Type
Profiles
Forums
Events
Posts posted by bishooman
-
-
I already tried this before reporting, still failed, windows wouldn't even boot with HALL Error
As i mentioned already, there are some steps missing in this particular case.
If any member success in this case, please report here with procedure.
May be we need to copy some files to the ROOT of drive C even we are installing into any other drive...
can you please check if your seconed partion is primaty partition ?
are you getting hal.dll error when you are going to GUI Setup or directly after you restart WINPE to get to TXT Setup??
0 -
Dear robekia
if you succeeded to instal to c: then 1,2,3,4 you are doing correctly.
now for installing to D: you have to change this line
V:\i386\winnt32 /syspart:D: /tempdrive:D: /makelocalsource /unattend:%UNATTEND_PATH%\%2changes is in bold
you will find this in xp2003.cmd
please report if this worked for you
regards
0 -
Upgrading from 32bit XP to 64bit 7 is not supported, windows seven instlation will complain about that and it will rename windows folder windows.1 and install a fresh copy.
better to back up your data to external hardisk so you can format then install
0 -
Hi,
first thanks for your great work, Secondly I've got a Question:
I am an IT-Professional and want to use the system to install every individual PC. Problem is, that in your diskpart.ini is written, that every data on first partition of disk 0 will be deleted. Some PC have 2 physical disks, one for the Data and the other for the system. How can I specify on wich disk and wich partition windows xp will be installed?
You will probably notice that there are more than one question but you may can help me.
Thank you
in XP2003.cmd file you can comment the line
diskpart /s diskpart.ini
then you can do your own custom partitioning and format using diskpart tool to read more about diskpart tool you can chack here
after that you can run xp2003.cmd to applay the rest of fix and then install
also you may need to change the drive letter in /syspart:c: /tempdrive:c:
as jaclaz mensioned if you are installing do a drive other than c:
please note that the clean command will delete all the partition on the selected drive s skip this step if you have more than one partition in one single phisical drive
Good Luck
0 -
Nice.
Stickied.
jaclaz
wow!! thanks alot for the stiky man, this will give me extra push to make this better and easier for all
0 -
Thanks for sharing this, it definitely will help many
you are more than welcome, i learnd alot from your topicts keep up the good job
0 -
Dear all
i have been reading alot in the last few days and i want to share my findings with you all.
this will be a small project and it will be updated frequently so please show support by testing it and give advices\corrections
Requirements:
1- Windows AIK from HERE
2- FileDisk 1.7 from HERE
3- PStart Application Lancher from HERE
Part 1: Preparing your Windows PE Enviroment
1. Install the Windows AIK using default options.2. Create Winpe 3.0 environment using the Windows AIK by excuting this command :D:\ Program Files\Windows AIK\Tools\PETools\copype.cmd x86 D:\winpe_x86this will create the Windows PE output in the directory D:\winpe_x86.3. mount the winoe image so that we can edit itD:\ Program Files\Windows AIKTools\x86\imagex" /mountrw D:\winpe_x86\winpe.wim 1 %D:\winpe_x86\mount4. now will will install FileDisk to our WinPE Enviroment, installing FileDisk involved to setpsa. Copy the Driver "filedisk.sys" to Windows\System32\drivers directoryb. add some registry valuesthis can be done by using the below commands
reg load HKLM\Winpe D:\winpe_x86\mount\Windows\System32\config\System
regedit /s D:\Winpe3.0\Tools\FileDisk\Filedisk.reg filedisk.reg is in attachments
reg unload HKLM\Winpe5.now we will copy the STARTNET.CMD to Windows\Syatem32
and we will add the rest of our files and folder to D:winpe_x86\ISO folder
xcopy D:\Winpe3.0\Tools\Start D:\winpe_x86\ISO\Start\ /s /e
copy D:\Winpe3.0\Tools\Scripts\STARTNET.CMD D:\winpe_x86\mount\Windows\System32\6. now we have to unmout the image and commit changes
D:\ Program Files\Windows AIKTools\Tools\x86\imagex /unmount /commit D:\winpe_x86\mount
7. now will copy the winpe.wim image to sources folder and name it boot.wim
copy D:\winpe_x86\winpe.wim D:\winpe_x86\ISO\sources\boot.wim
and now our Windows PE Enviroment is ready.
Part 2: Preparing PStart and our Windows Setup Command
The windows PE image we just did will boot from USB Flash or Hardisk in 30sec and load PStart.exe so we have to prepare our Setup.cmd file that will partition, format then start winnt32.exe.installing XP from Windows PE will require some special registry entries and format style in our Windows PE Enviroment for more details check this threadfor that i already added all the needed files in D:\Winpe3.0\Tools\Start\Setup folderthe command i am using here to do the job is XP2003.cmd that will do the folowing1. Set ISO files root2. Set Unattned files root3. will the needed registry entries needed to correctly partion your harddisk for Windows XP usage check this ()4. will partition and format usr hardisk using diskpart.exe and diskpart.ini the holds the format script NOTE: the included diskpart.ini will format your drive C:5. you need also to fix the boot sector after you format your hardisk to be compatibale with Windows XP6. Finaly it will mount you Windows XP iso file and Start the Setup Proccess.SET ISO_PATH=%~d0\Start\ISOSET UNATTEND_PATH=%~d0\Start\Unattendregedit /s fixbootxp2003.regdiskpart /s diskpart.inibootsect /nt52 c:filedisk /mount 0 %ISO_PATH%\%1 /cd V:V:\i386\winnt32 /syspart:c: /tempdrive:c: /makelocalsource /unattend:%UNATTEND_PATH%\%27. Now you have to add a new entry to PStart to launch XP2003.cmd with 2 command parameters1. ISO file name2.Unattended file nameXP2003.cmd XPSP3.iso Unattended.txt
Part 3: Preparing Your USB Flash or HDD and BOOT IT !
1. format your usb drive from windows vista/7 open cmd windows and type#first excute this command to check your drive numberlist disk#then use it as below mine was 2diskpartselect disk 2cleancreate partition primaryselect partition 1activeformat fs=ntfsexit2. copy all the files\folders in D:\winppe_x86\ISO to the root of your drive3.copy your XP ISO file to you usb drive in U:\Start\ISO4. boot your USByou will find in the attachment all the files needed and Setup.cmd the will do all that job for you, to run it correcttly you need to do the folowing:
1. extract winpe3.0 some where in c: or d: drive
2. open Setup.cmd and edit the first 3 lines
SET WINPETOOLS_DIR=L:\Winpe3.0\Tools <-- path for the tools you downloaded here
SET WINPE_ENV=L:\winpe_x86 <-- path where Winpe Enviroment working directory
SET WAIK_DIR=C:\Program Files\Windows AIK <-- path to Windows AIK
@ECHO OFF
SET WINPETOOLS_DIR=L:\Winpe3.0\Tools
SET WINPE_ENV=L:\winpe_x86
SET WAIK_DIR=C:\Program Files\Windows AIK
ECHO.
ECHO Creating Winpe 3.0 Enviroment ...
CALL "%WAIK_DIR%\Tools\PETools\copype.cmd" x86 %WINPE_ENV%
CLS
ECHO.
ECHO Mounting Winpe Image ...
"%WAIK_DIR%\Tools\x86\imagex" /mountrw %WINPE_ENV%\winpe.wim 1 %WINPE_ENV%\mount
CLS
ECHO.
ECHO Installing FileDisk Driver...
copy %WINPETOOLS_DIR%\FileDisk\filedisk.sys %WINPE_ENV%\mount\Windows\System32\Drivers
CLS
ECHO.
ECHO Installing FileDisk Registry Values...
reg load HKLM\Winpe %WINPE_ENV%\mount\Windows\System32\config\System
regedit /s %WINPETOOLS_DIR%\FileDisk\Filedisk.reg
reg unload HKLM\Winpe
CLS
ECHO.
ECHO Coping Other Tools..
xcopy %WINPETOOLS_DIR%\Start %WINPE_ENV%\ISO\Start\ /s /e
copy %WINPETOOLS_DIR%\Scripts\STARTNET.CMD %WINPE_ENV%\mount\Windows\System32\
CLS
ECHO.
ECHO Unmounting Winpe Image ...
"%WAIK_DIR%\Tools\x86\imagex" /unmount /commit %WINPE_ENV%\mount
CLS
ECHO.
ECHO Coping Winpe Image to ISO\Sources..
copy %WINPE_ENV%\winpe.wim %WINPE_ENV%\ISO\sources\boot.wim
CLS
::OSCDIMG -N -M -O -B%WINPE_ENV%\ETFSBOOT.COM %WINPE_ENV%\ISO %WINPE_ENV%\WINPE.ISO
@pauseyou can uncomment the last line to build the project in iso format so you can test it in Virtual PC or Virtual Box
Download ver0.1 Windows Vista\7 Users should right click and run as administrator Setup.cmd file
THINGS I WANT TO ADD\UPDATE your Suggestions is more than welcome
1- Using a GUI Disk Managment Tool that is Free and easy to use (for XP/2003 instlations)
2- Replacing PStart with more advanced specific application (maybe i will code it my self)
3- adding on the fly unattented file generator
4- Give the Project a Name
THINGS I AM WORKING ON RIGHT NOW
1- Integration of Raid Drivers WITHOUT CHANGING THE ISO
2- GUI Tool for the Project
3- 64bit setup.exe will not run from 32bit Winpe i am looking for a solution
0 -
i have a usb drive and i have wrote a small batch file to copy files from usb to the hard disk "C:\" but the problem is it is working on my system because the usb is always have the letter F: on my system however it is not working on other systems becase drive letter is being changed
another workorund will work for me if i can use volume name instead of drive letter for copying
thanks
0 -
is there any way to give my usb hdd a fixed letter so it is uses same letter in any pc i plugit on ?
0 -
i think i am going to cancel the project !!!
0 -
i am planing to devolope a new pice of softwear similar to ua registry tweakage but it will be dynamic cuz i will make the tweaks to be read from somthing.ini file that help to make my software upto date
i need beta testers
suggestions
anything that helps
and some one who can update the ini file
wht do you think ???
0 -
if any one can get me the source code of this tool i can improve it and support it i think it is nice one and i can build a new one but it will take a really time so if any one can get me the source i gan do really god improvments
thanks
0 -
why batmeter.dll has been removed from Xpize 4.1 is there aproblem with this file i use xpize on 3 laptops and i dont get any problem with this file ??
the meter looks better why you removed it ??
thanks
0 -
yes it is working
in your exmple it will not work !!
try to edit the command lins to this if you want to test it from hard drive
prog[16]=['Sygate Personal Firewall']
desc[16]=['']
regb[16]=['systemdrive','XPCD\\APPLICATIONS\\Sygate\\reg.reg']
cmd1[16]=['systemdrive','XPCD\\APPLICATIONS\\Sygate\\pspf.msi /qn REBOOT=Suppress']
cmd2[16]=['','']
cmd3[16]=['','']
rega[16]=['','']
dflt[16]=['no']
but if you are going to burn to a cd or dvd you command line are ok and it should work.
0 -
it is a broken link plz any one post a working link !!!!!!!!!
0 -
plz any link to get AIO for office i cant find it any where !!
0 -
hoverhead
WPI 2.7 is by bishooman and gresh and we didnt relesed our 3.0 version yet we are working on that
WPI 3.0 beta it is by coolsights2000 he did a very nice job but i think it is complicted
for all
we are thinking to make many changes in our version 3.0 we will make WPI easier to use with completly new interface and all the opption that any body needs
so plz keep working in our version 2.7 and tell us what need to improve
thank you all
0 -
original post updated
0 -
i understand you and edit it and now working just perfect as you want
forced will install if not checked when pressing the install button
reallyforced(new) if on forced will install on exit if off will exit without installing anything
download the new file
0 -
beppemito
you have to make a cmd file with your command of XCOPY and run it from WPI
0 -
a06lp
no need for docs if you want to delete it , it is ok
forced apps will be installed also if not checked you just try it and it will work
wpi.cmd is not a part wpi main program it is just to run it you can make your own one
i think it is perfect now
0 -
hi all
me and my friend gresh was working on wpi for many hours and we finaly finished our final version WPI 2.7 FINAL
there is alot of new featuers, many improvments, and many bugs fixing plz try it and give us your opinion
featuers added
1. timer can be turrend on or of from config.js
2. time interval could be set from config.js
3. load with defults or all or none could be set from config.js
4. timer supports up to 3600 sec 60:00 min
5. registry files support
6. forced instalation will install applications even if not checked
7.ReallyForce (yes, no) opption to install forced application even if Exit button pressed
8. next and back buttons fixed when the programs more than 20 for all reslutions
9.800*600 FIXED
10. Added Support For Multi DVD OS 24/9/2004 (gresh)
after all i am very thankful for my friend gresh (one of the members of this forum)
for his time and effort
WHAT IS WPI ?
Windows Post-Install Wizard (WPI for short) is a hypertext application designed for giving users choice. While Windows XP offers many ways of customizing the setup process out of the box, its major drawback is the lack of being able to select which applications an end user may install. In the past, end users and administrators needed to either download the files manually, or create overly complex scripts that could only be used once. WPI allows you to create one image, which can then be custom configured, and optionally, automated, so that end users can install any applications.
for anyhelp on how to use this program plz download it and you will find everything in the docs folder.
WPI 2.7 added on 24/9/2004
0 -
New version, check here : http://www.msfn.org/board/index.php?showtopic=28125
0 -
cool Coolsights2000 better interface go on
0
Install Windows from ISO after booting to WinPE 3.0 from USB HDD
in Install Windows from USB
Posted
Hey Guys,
sorry for the delay, but actully i was in a vacation and when i take one i like to be away from all kind of technology and devices
anyway i will review your questions and see what i can do to make this easier.
it is a good thing to hear from all of you this feedback is very helpfull to me
thanks