Floppy
Content Type
Profiles
Forums
Events
Posts posted by Floppy
-
-
Are the WINNT.SIF the same after as before Sp3 ??.......
I created a new WinNt.sif with nlite(WinXp & Sp3)....and now .....it works
0 -
Hey
I thougt that the "Windows XP SP3 updates for use with HFSLIP" was a complete list...?
I dont use Hfslip to create an image.....I use CDIMAGE.EXE to do that.
0 -
Later!
No Go.
Xp runs the gui part of the instalation begins, then BSOD ---> setupdd.sys.
0 -
I'm looking at your list against my list
May I suggest
directx_jun2008_redist.exe to be located at HFSVCPACK
WindowsXP-KB941569-x86-NOR.exe to be located at HFSVCPACK_SW1
There may be some truth about bad ram but I'm not expert in this
Can also try setting your virtual PC ram above 128mb
Thankyou for your answer!
Iam quit sure that this is not a mem problem. Tried on 2 Pc's and one laptop.
According to "Windows XP SP3 updates for use with HFSLIP" the files chould be where I put them....
But Iam trying your sugestions now
Will be back
Edit: New Log file, new atemp.
0 -
Hey
I have hfslip-1.7.8 and wmp11 and SP3, and XP Pro and I have tried to do the slipstream.
But during xp instal I get BSOD reffering to setupdd.sys.
Have tried to slipstream sevral times + new DVD's and tried it on Virtual Pc--> Same result!
Can some one help me with some clue's?
0 -
Hi Floppy,
you wrote this earlier:
> I tried with iso only 450Mb---> The program finished ok.
> But I could not boot from pen, Message was "NO OPERATING SYSTEM"
Please test this ISO with MagicISO for bootebility.
The DVD might be OK, but you could not write it to the pen.
So that gives no information.
You succeeded to write the smaller ISO. But this one cannot boot from the pen.
So most probably the created ISO itself is not booteble.
That's why I asked to test this ISO for bootability.
MGE
My language is not English
If I burn the small ISO on a dvd I can boot from it. I did the "MagicISO" thing.(See pic)
Thank you for your effort!
0 -
Dear Floppy,
I understood you question but do not know a program or method to show if the stick is bootable.
Please let me know if your ISO was/is bootable before you wrote it to the Sandisk
by testing it with for instance MagicISO.
MGE
Hey
I used the same ISO as I wrote to DVD. It has never failed.The thing is that when I tried to boot from the USB pen, it seems that the pen is found during post up....but the process seems to halt.That's why I was wondring about if it was possible to chck if the pen was bootable.
And thankyou for responding to my question.(And for ignoring my bad spelling
)0 -
Hi,
you can check if your ISO is bootable with programs like Magiciso.
Do this check before you write it to the stick.
Magiciso can not recognize the (files on?) theU3-CDROM.
MGE
Thanks,I wanted test if the pen was bootable.
0 -
Hi,
what operating system is used??.
I think back-up should always work correctly if the pen is recognized.
Looking at the size of you ISO it is not XP.
I have read that the original Sandisk/Memorex program version 1.0.0.8 is not Vista compatible.
That could the reason for this newer version I believe:
Memorex LaunchPad Updater v1.4.0.2 is at http://www.memorex.com/u3/upgrade_vista/ ;-)
You will have to patch it yourself as described earlier in this threat.
MGE
PS I do not know what happens is the CD-iso is bigger than a CD
WinXp
I tried with iso only 450Mb---> The program finished ok.
But I could not boot from pen, Message was "NO OPERATING SYSTEM"
Will try more!
Edit.
Tried On a diff. PC, nogo..Howe can I see if it's possible to boot from pen.That the pen is bootable?
0 -
Try with a smallish ISO first.
Use nlite to reduce it, a "normal" nlited image is a few hundreds of Mbytes, usually less than 400.
IF it works, try with a bigger one, it is possible that there is some hardcoded size limit somewhere.
jaclaz
ok,will try....
0 -
Installing XP from USB-stick the easy way
1) Buy a Sandisk Cruzer with U3 functionality
2) Download Universal_Customizer from here http://www.hak5.org/packages/files/Universal_Customizer.zip
3) Make a (Nlite slimmed) XP bootable ISO see www.Nliteos.com
Can be slimmed down to the bone. Manual install etc. can be removed.
4) Install Universal_Customize
5) Copy ISO in ../BIN directory where Universal_Customizer is installed
6) Rename the ISO to U3CUSTOM.ISO, it can be any size fitting your USB-stick
7) Run Universal_Customizer, follow instructions, be patient!
8) Boot from USB-CDROM and start installing XP
I have tried this. NoGo
I bought a 4Gb disk(the right kind)
My ISO file is 2.3Gb.
I renamed it to U3CUSTOM.ISO. (under \bin).
Then I runed Universal_Customizer.exe.There are 5 steps in this program.
Step 3 Backup seems to fail evry time, and then the program halts.
If i run the ISOCreate.cmd, and then Universal_Customizer.exe it goes to step 4 and 5, but halts on 5 after that you have pulled the usb pen out and inserted it again.
Iam not abel to boot from the pen.And yes my mb is capebale of doing so.(DFI NF4)
Any ideas?
0 -
Open your CD and look for these files
WIN51IC for Windows XP Home Edition
WIN51IP for Windows XP Professional
In pre-installed XP...
Right click on My Computer --> Manage
Select Computer Management and click on Action menu --> Properties
Its show origianl info about Windows as well as your hardware information.
Some times people edit sysdm.cpl using ResHacker and modifiy Windows version from System Properties control panel aaplet...but It works always...!
Thankyou, just what I needed!!
0 -
Hey
I need to know if it is Pro or Home that beeing installed.
There are some applications that I only instal for pro, and I use the same $OEM$ for Home&Pro.
So during install I need to know the diffrent!
So far I have "read" the C:\WINDOWS\system32\EULA.TXT and for
WinXP Pro it says "EULAID:XPSP2_RM.0_PRO_OEM_NO"
WinXp Home it says "EULAID:XPSP2_RM.0_HOM_OEM_NO"
WinXP Corp "EULAID:XPSP2_RM.0_PRO_RTL_NO"
It works,but Iam looking for a better way to achieve my goal
Any ideas!!!??
0 -
I see two problems.I have 2 KB's giving me a hard time.(KB934238 and KB933579)1) You are including both msxml6_x86.msi and msxml6-KB933579-enu-x86.exe. Silent .NET Maker only takes one and it uses the MSI because it's faster, but the file named "msxml6_x86.msi" is old so you should remove it. Silent .NET Maker will then use msxml6-KB933579-enu-x86.exe. If you want, you can use msxml6.msi from inside msxml6-KB933579-enu-x86.exe to make things faster but it's not required. This should solve the KB933579 problem.
2) Your KB934238 problem is probably due to the absence of the KB934238 update for the main .NET 3.0 package. You only have the KB934238 update for your language pack.
Thank you for your reply!!!
I followed your advice, and it worked perfect.
Excellent work from you as usual!!
0 -
Hey
I have 2 KB's giving me a hard time.(KB934238 and KB933579) (Norwegian XP)
Have read through this forum I fond this:
KB934238
Alright. These are clearly updates for .NET 3.0. I will update the SNM script for this when I have the time. It shouldn't be too hard to add support for them.Iam using the SNM script. an the folder looks like this;
What amI missing?
I confirmed KB934238 and language file were able to be integrated.Thanks!!
Can you pls. tell me how you did this?
0 -
Hmmm
It seems like my antivirus program was the problem....
I turned it off,did a slipstrem and instaled it the same PC...and it worked
0 -
Hey
I have a WinXp Pro Corporated, and I have used Hfslip many times to keep it up to date, no problems.
But yesterday when I installed on a PC(the install passed on fine) and did a reboot, a message was diplayed saying somthing like;
"The licens can not be verified".
Then I can not log myself onto the Pc......
Has anyone experienced this?
Any clue what's wrong?
0 -
The drive letter shouldn't make any difference. I suggest you run a chkdsk /r on your F: drive.
I tried chkdsk /r on F., it took about 60minutt's to complete.
Copied c:\HFSLIP to F.\HFSLIP....same error
I will stick to c:\HFSLIP
Strange huh?
Thankyou for your effort Tomcat76!!
0 -
Thanks for your help Tomcat76.
I tried "the special version", and it came up with a log.
I downloded the KB in the report.
Run "the special version" again, new KB in log.
Repeat
Repeat
Repeat
Then I saw that the KB in the log repeted itself....
So moved Hfslip from "F:\hfslip" to "C:\hfslip",,,,,,, and all errors disappeared
Maybe there is somthing wrong with my disk, or maybe HFSLIP feel comfortable at C: instead of F: ?
0 -
Hey
I have downloaded the kb's that preceding the one's that gave error.
No change.
Is there a list/log somewhere that scows me in what order the kb's are processed?
0 -
Thanks for your respons.
Will check out my HF folder
0 -
Hey
During hfslip I get these errors running over my screen:
1: Directory or the file TEMP already exsist
2: No accsess
3: Directory not empty
4: Error during creation of file - system does not find the file
Theese errors commes all the time, for several KB's..
My log is attached.
The funny thing is that when I use the Image to instal WinXp, all updates seems to be ok......
0 -
Ok, Thank's
0 -
Thankyou for your reply!!
I have removed the file that you mentioned.
And then I conscientiously compared your XpSp2 updatlist with my HFSLIP. (Puha)
So now the Error is gone!
New error....
Iam doing my XP in Norwigian.
So the error text during hfslip is in norwigian.
I says somthing like this;
-------------------------------------------------
WindowsXP-KB873339-x86-NOR.exe
Folder is not empty
TEMP`\hypertrm.dll
1 File(s) copied
Folder is not empty
WindowsXP-KB885626-v2-x86-NOR.exe
Folder exsist or file TEMP exsist already
TEMP\update.sys
1 File(s) copied
--------------------------------------------------
HFSLIP report this sevral times for diff. KB's
My HFSLIP folder is F:\HFSLIP
Iam the administrator.
I have tried to make a new HFSLIP folder and copied the occupied directorys (HF,HFTOOLS, etc) over.
Fresh SOURCE.
The error stays.
Any ideas?
EDIT
After running this compilation an doing a MS-update(via net) Iam only missing this updates;
KB930916
KB931768
Can this updates be added to HF?
0
PowerDVD 8 & 9 Silent install
in Application Installs
Posted · Edited by Floppy
Hey
I get "Could not register the audiofile YYYY.XXX"
during instal......Any ideas.
Same error when instaled from RunOnceEx.cmd or after a frech xp instal.
I created a sfx arcive like this;
---
First unpack power dvd setup to a folder.
Copy "setupCustom.ini" and "PDVD8.reg" files in the same folder as where you extracted your setup.
Open Winrar
-select option "Create Sfx archive"
-select "Best" from "Compression Method"
-select comment and copy this:
;The comment below contains SFX script commands
Setup=Setup.exe
Presetup=REGEDIT /S PDVD8.reg
TempMode
Silent=1
Overwrite=1
---------------
No go...."Could not register the audiofile YYYY.XXX"