Okey i have done everypart in the guide succsesful but when it comes to: "Power OFF/ON the drive (very important!) Wait 10 seconds and now Power ON your drive. Press CTRL+Z on terminal and type:" The terminal wont let me type after i pressed CTRL-Z. What can be wrong? I am still connected. *edit* Okey this is unbelievable. I successfully restored my harddrive!! Something made my cable disconnect and loose all my drivers to the cable when i disconnected the power from the harddrive in "Wait 10 seconds and now Power ON your drive". I reinstalled the drivers from this page: http://www.the-stickman.com/files/irda-ma6...ivers-Dynex.zip and went to hyper terminal again. I tried to connect and it connected but i couldn't type anything. After a little research i tried to change the com port on hyper terminal to the same as the one that was given by Windows. I tried CTRL+Z again and it worked! I just resumed with the "m0,2,2,,,,,22"- command and pressed enter. Then i got the successful format message and replugged the harddrive to the computer and rebooted. And it worked. I am so happy i didn't think i would made this but i did it, and i am so glad. I want to thank everyone on this forum that are charing all you thoughts and infos. And i want to thank Nitrohelix that made this video that made everything so simple: http://www.youtube.com/watch?v=29FztWJVxbM Thank you