LAZAROS
Content Type
Profiles
Forums
Events
Posts posted by LAZAROS
-
-
I read the following pdf
It says that the disk can unlocked with some command from hyperterminal.It does not say to unplug the PCB. Do you think this will work as described?
http://www.tdubel.com/artikkelit/tiedostot...ial_english.pdf.
0
The Solution for Seagate 7200.11 HDDs
in Hard Drive and Removable Media
Posted
1 You wrote "With the POWER CONNECTED to the PCB board, as well as your TX/RX terminal wires, mount the board back on the HDA case. You must have the power connected when you do this."
Is this dangerous for the PCB ? (why don't unplug fist the PCB and next to connect the power to the HD?)
2. You wrote
"F3 T>m0,2,2,,,,,22 <<< This command takes a little over a minute to complete!
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 14, Max Certify Rewrite Retries = 00C8
User Partition Format 5% complete, Zone 00, Pass 00, LBA 00004339, ErrCode 00000080, Elapsed Time 0 mins 05 secs
User Partition Format Successful - Elapsed Time 0 mins 05 secs"
What does it doing with this command? Is this to format the HD and lost the data. What does it mean "Partition format"?
Many Thanks
Lazaros