Big Booger

http://www.earthweb.com/article/0,,10456_6..._623561,00.html That article should help you in your quest. Big Booger

I scrounge the net for my drivers. I look for all the updated drivers for my system, from the CDRW, to the NIC. ONce I get them all downloaded I put them on a CD. I leave the CD open in case I have to burn additional drivers. Works like a two peckered camel. Big Booger

Haven't tried it, but I see that it's there. Screenshot attached. Big Booger

I just felt like posting something stupid. Big Booger

I just ****king went to that site, and guess what, trojan on my system. You pr1cks who post this sh1t autta have your Scrote fileted with a fishing knife, and the skin surgically implanted to cover your breathing holes, so you suffocate to death! Just kidding. Big Booger

switch to hand grenade or even get rid of your weapon by hitting Q. Then run in a zigzag pattern. Ducking behind the tripod barricades as necessary. YOu can time the bullets too. I try to keep low and after the first wave I run. Then I duck behind a tripod and wait for the second round, after which I run again. It is very hard, but for some, luck provided it is very easy! Big Booger

very kewl. I like the iconz. Big Booger

http://www.practicallynetworked.com/sharin...stall_bband.htm try this site for ICS in windows 2000 One other thing, does your router have a firewall? If so you might have to forward the ports, disable the firewall etc... Big Booger

All I know is I had it, and sniped the bastards. Oh, yeah, its after you run in the mortar holes, I got the sniper rifle. Then YOu snipe them. YOu can also use your machine gun to zap them. Use the c and z keys to bend your a** over to get em. BB A sweet easter egg has just been found in MoH! Here's the full e-mail: In the sniper's last stand level, on hard difficulty, I managed to save all allied soldiers (5 I think). On the next level I got to the tank with all the tank crew alive and all the soldiers from the next level also alive (counting me, we were 7 allied soldiers). After I got to the tank my screen went blank and the sign "You have 60 seconds to find a safe hiding spot and then Bazooka-Med will be on your trail", then I saw a countdown and after that the camera switched to Bazooka-Med and "Ready or not, here I come!" appeared. After that Bazooka-Med went looking for me through all the level until he found my trail (don't know how) and "BAZOOKA MED HAS THE TRAIL!!" appeared, he went where I was hiding, shot me with the bazooka and "You lose. Hide better" appeared. After that, I continued with the normal Tiger tank level. I don't know what happens if bazooka med doesn't find me. I'll keep on trying. By the way, on my list of saved games I have a new savegame called "The Void - Starting". http://www.zeroping.com/mohaa/index.cfm Going into options will get you a list of all the keys and what they do Xperites. BB

When you get past the barbed wire, snipe the two guys shooting the MG42 - mounted machine gun turrets [German] but you need to kneel down, hit the c key and snipe them. I usually snipe them after the two privates run across. Though I think you can snipe them before. Then snipe the guys in the top of the concrete bunkers. Be careful when you run across and stay in the pits, because of landmines. BB

Here's mine just rename as recycle bin.ico LOL just kidding. i think that the site reverend gave you will fix your issue. Tell us if it does. Big Booger

Just wondering? v1.1 Big Booger

Ok bump the price up about 100-160 bucks for retail. I have never personally had any problems with OEM, though I know they make retail a bit better based on the fact that is boxed in a nice new wrapper and is aimed at the PC builder/upgrader who demands more, but I think as long as it comes with a warranty, and you want to minimize the cost, go for it. Big Booger But I know where you are coming from. Pentium® 4 2.2GHz Northwood Processor, 400MHz FSB, Socket 478 Manufacturer Part#: BX80532PC2200D In stock! Retail. Three Years Warranty. (Memory not included) 512KB Cache, Intel NetBurst micro-architecture $ 541 starts at 11.74 2/13/2002 3:04:24 PM CT Intel Microprocessors PC Pentium 4 2.0GHz 400MHz FSB Socket 478 (No Memory) Processor Intel Part#: BX80531NK200G In stock! Retail. Three years manufacturer warranty. w/Fan and Heatsink. 256KB Cache $ 343 start ats $10.74 2/13/2002 3:03:18 PM CT GOOGLEGEAR.com 510-739-1890 . CA 80633-478

IS THE MX VARIETY AND I HEAR IT IS ABOUT ON THE SAME SPEED AS THE GEFORCE3 TI200, THOUGH I COULD BE MISTAKEN. As for 1200 bucks, are you getting that CPU gold plated? Titanium case? What gives? I think someone is bending you over and reaming you. if this is a complete system go for a pentium4 2.2 or 2.0, 512MB RAM, 80 Gig HDD, DVD + CDRW drive, Floppy, Firewire, GeForce4 Ti 4400, ALuminium case etc... I mean hell, you better really comparison shop. I think I could get the above system for around 1200-1300 dollars easily. Tyan Socket 478Intel 845 chipset Pentium 4 1.5Ghz, 1.7GHz+,1.8Ghz, upto 2.2Ghz, d SDRAM PRICE FOR PHONE ORDERS ONLY, MENTION PRICE WATCH - Retail box Part#S2090 $ 69 Read This 2/13/2002 8:00:07 PM CT Justdeals.com 800-971-0525 510-441-6490 AGI 16X DVD-ROM RETAIL AGI 16X DVD-ROM w/DVD software RETAIL BOX NEW $ 38 15.95 2/13/2002 2:29:08 AM CT BPCLAND.COM 866-569-3288 909-839-2510 32x10x40 ; 32x record, 10x rewrite, 40x read 32x10x40 32x10x40 Internal EIDE CD-RW , oem , 1 Year Warranty $ 78 13.95+ 2/13/2002 11:57:39 PM CT House of Computers 888-633-2882 714-680-3788 Samsung 3.5inch 1.44 Floppy Drive 1Yr Warranty MUST MENTION PRICE WATCH - .floppy $ 3 INSURED $12.00 1/28/2002 4:03:47 PM CT Connect Computers 949-367-2875 -------------------------------------------------------------------- IN STOCK(SOCKET 478) Pentium® 4 2.2GHz (2200MHz) - NORTHWOOD P4 INCLUDES 30 Day Dealer Warranty - 400MHz FSB - 512K - .13 micron - OEM - 2.2 GHz (2200 MHz) $ 473 $7+ Fedex 2/13/2002 4:05:47 AM CT PC XPERTS 800-666-7551 216-297-1061 --------------------------------------------------------------------- OR Pentium® 4 2.0GHz Processor 256K 400FSB System Bus Socket 478 CPU Intel P4 2.0 GHz 256K 400MHz FSB Socket 478 OEM (30 Day Dealer Warranty) $ 301 $6+FEDEXinsured 2/12/2002 10:17:34 AM CT PC XPERTS 800-666-7551 216-297-1061 ------------------------------------------------------------------ NeutronUSA# 146394 64x4-PC133-512MB-Economy PC133 ( PC100) 512MB 168 pins SDRAM-High Density PRICE FOR PHONE ORDER, MUST MENTION PRICE WATCH - NeutronUSA 146394 $ 76 2-3 Day/ Insured $12.95 2/13/2002 5:52:35 AM CT NeutronUSA.com 800-813-4218 814-237-0902 PA 146394 Ultra Maxtor 80.0GB EIDE ATA/100/133 7200RPM, 6L080J4 3 Year Manufacturer Warranty $ 134 $12 & Up 2/13/2002 7:34:06 PM CT Esystor.com 866-968-0033 626-968-0033 CA 6L080J4 usTek Video Cards PRICES FOR ONLINE ORDERS ONLY -ASUS V8440 GeFORCE4 TI 4400 128MB DDR w/DVID out. ETA 2/22/02 128MB 550MHz DDR, nVidia GeForce4 Ti 4400 chipset. 300MHz core clock speed. $ 321 Starts @ $10, insured 2/12/2002 8:57:56 PM CT Mark One Computers, Inc. 888-204-4789 847-437-9907 IL V8440 Skyhawk Eagel AL4350 Silver all aluminum case. 7bay mid tower w IEEE game & USB front panel control Price for phone order. Mention PRICE WATCH - aluminum gamer case. case mod available. very sharp looking. No 2nd grade power supply included. 3fans $ 60 17 insured 2/9/2002 6:59:46 PM CT OC System 877-785-3285 626 9340078 CA - IEEE-1394 Fire Wire PCI Card, 3 Ports IEEE1394 Firewire PCI Card, TI Chipset, OEM package $ 24 $8.00 INSURED 2/11/2002 12:16:14 AM CT www.iitem.com 866-457-9426 626-442-8564 GRAND TOTAL without shipping, with 2.2 northwood $1276 if you went with the 2.0 ghz CHIP Grand total would be 1104.00 Just something to think about. By the way the prices come from Pricewatch.com Consider that before they give it to you in the anus on your deal. Big Booger

http://howto.lycos.com/lycos/step/1,,9+355...5+35650,00.html that site is nice for repairing XP. [b:d1546cd85c]Fast tips[/b:d1546cd85c] To repair the Windows NT/2k/XP boot sector on Fat partition Windows NT installs a boot sector that launches NTLDR and displays the Windows NT boot menu. If you lose this boot sector, BootPart can restore it. Boot under MS-Dos (this can be MS-Dos 6.22 on your hard disk, on an MS-Dos bootable floppy, or the "MS-Dos 7.0" included in Windows 95 (you can obtain it by pressing Shift+F5 when Win95 loads). Then, enter the command : BOOTPART WINNT BOOT:C: If you want to remove the WinNT boot sector, you can replace it with the command "BOOTPART DOS622 BOOT:C:" or "BOOTPART WIN95 BOOT:C:" http://www.winimage.com/bootpart.htm bootpart file is above --------------------------------------------------------------------- YOu might also find some relevant information at the below referenced site! http://support.microsoft.com/default.aspx?...b;EN-US;q291980 Hope this helps, sorry about your poor experience with XP thus far, but really once you get the kinks worked out, you will be very pleased. One other thing, it could be your BIOS, you might want to try to update it. ANother thing is to check your RAM like reverend said, additionally, if your BIOS supports it, you might want to bump down your memory to the next lowest level example from 133---->100, 100--->66. Give that a go. And my last shot-in-the dark is to change the position of your HDD on the IDE cable. See if that does anything for you. Big Booger "s*** happens"

Just kidding man, really though 20 applications??? I have 62 installed and tons more downloaded. I had to do a reinstall of XP once before with about twice that amount. 85 gigs keeps me busy. But to address your issues, A.) F1 to resume, two things I can think of CMOS battery is failing, stuck key etc... http://www.cubix.com/support/techinfo/manu...030/4030-ab.htm check this page out, it seems you should be getting an error message, if so what does it say? B.) Does your sound work? If so, check your msconfig and make sure everything is checked. Next try a diagnostic startup, and the a normal start up. I know you said you did it right, but just to triple check did you follow this totally... Click Start, and then click Control Panel. Click Sound, Speech, and Audio Devices. Under Pick a task, click Change the speaker settings. In the Sounds and Audio Devices Properties dialog box, on the Volume tab, select the Place volume icon in the taskbar check box, and then click OK. C.)What do you mean it corrupted your setup? Have you tried a driver rollback? Maybe that will help. ANother thing is to just reinstall the driver. These are about as good of an answer as I can give at this time. Good luck Big Booger

Might fix your issues. Why try to revive the dead. Let that installation rest in peace, back up the important files, and get to installation time. Big Booger

............ Big Booger Ok, well I must say one thing, I don't personally give a rats a**. I just thought it would be kewl to have the ability to protect an image, a icon, and other artwork from being copied or manipulated especially when considering the time it takes to make such things. I too think the internet should be open a free for all. Who gives a rat right! Big Booger

Welcome to the boards man. Nice sig. Big Booger

Thanks reverend, that site has a nice additional map called "Cathedral" I am downloading it now. Looks to be rather interesting! Weapon Skinning Walkthrough by MPowell1944 Follow this Step - By - Step Guide to create a new Thompson skin... 1. create a folder in /main called Pak2 2. double click on Pak2.pk3 and open with winzip 3. extract Pak2.pk3 to the Pak2 folder 4. exit winzip 5. create a folder in /main with your name, for example...."bob" 6. create a folder called textures.....inside the "bob" folder 7. create a folder called models.....inside the textures folder 8. create a folder called weapons...inside the models folder 9. create a folder called thompsonsmg....inside the weapons folder *you have just created the mirror directory of the thompsonsmg* 10. open up photoshop (or paint shop pro) 11. click file-open 12. goto your /main folder and find the Pak2 folder 13. double click on Pak2 folder and then double click on the textures folder 14. once inside the textures folder double click on the models folder 15. once inside the models folder double click on the weapons folder 16. once inside the weapons folder double click on the thompsonsmg folder 17. double click on thompsonsmg.tga 18. edit the look of the weapon to your pleasing (experiment for best results) 19. click file-save as 20. goto your /main folder and find your "bob" folder 21. double click on the "bob" folder and then double click on the textures folder 22. once inside the textures folder double click on the models folder 23. once inside the models folder double click on the weapons folder 24. once inside the weapons folder double click on the thompsonsmg folder 25. now save thompsonsmg.tga to this folder (the path should look like this... /main/bob/textures/models/weapons/thompsonsmg 26. exit photoshop (or paint shop pro) 27. goto your /main folder and double click on the "bob" folder 28. right click on the textures folder 29. select "Add to Zip" from the drop list 30. you should now be at the winzip add to archive screen 31. you will see a path highlighted near the top of this dialog box 32. retype the path so that is directed to the /main folder 33. after /main on the path, type....for example..."bobsgun.pk3" (make sure that it says .pk3 and not .zip!!) 34. now click ok and check your /main folder to make sure that "bobsgun.pk3" is there (just right click on "bobsgun.pk3" in the /main folder to check that it is a .pk3) 35. now start MOHAA and your new gun will be with you *at this point you are now a newbie modder* There it is folks the instructions, I am debating doing this. It sounds kewl. Maybe I can take the rocket launcher skin, and add it to the Thompson SMG. What do you think? Big Booger

Get vertical in MOHAA Big Booger

http://support.microsoft.com/default.aspx?...b;EN-US;q175037 This here link might help you in a jiffy with yur inbox problems pal. Let me no if it's not what you wanna do, and I'll saddle right up and mosey on down to the OK corral for a bit of more tech suppurt, Big Booger

Forget to pay your bill? type the address correctly? Did your site go bankrupt? Just kidding. Strange indeed Big Booger!!HELP!!

http://xp.modrica.com/forum/showthread.php?s=&threadid=1031 FGONI, YOU LITTLE s***BAG! j/k Yeah you only need to post once. Name: Christopher Date: December 28, 2001 at 20:42:11 Pacific Subject: xp file sharing problem Reply: I was having the same frustrating problem. I finally did this and it worked: uninstall TCP/IP (in 'My Network Places' > properties)on both the server pc and the notebook. Reboot and reinstall. Then make left click on the drive(s) on both pc's to insure that 'sharing' is correctly set. That should do it... That was taken from the following site: http://www.computing.net/windowsxp/wwwboard/forum/10840.html --------------------------------------------------------------------- Next I suggest you check out this site!!! http://www.practicallynetworked.com/sharing/xp_filesharing/ AND here http://www.wown.com/j_helmig/wxppntsh.htm AND here http://www.jimthompson.net/xphome/File_Sharing.htm Another suggestion: Install XP on the laptop. Then try your file sharing. Big Booger